SPECIAL REPAIR TO BLDG NO TWG 454 ACUTE WARD AND TWG 453 ICU OF 305 FIELD HOSPITAL UNDER GE TAWANG

Amount

B&R Works Dismantling plain or corrugated steel sheeting any thickness, any gauge, thickness, including nainital or similar roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws acomplete all as specified and directed.

Taking down chowkets or frame with shutter (without taking off shutters from the frame) n.exe 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Dismantaling timber scantling 40 Sq cm as in unframed work and over in sec in any position complete all as specified and directed.

M&L Second class Hard wood clean swan timber framed work as in scantling omplete all as specified and directed.

S&F Second class hard wood plain, solid, straight chowkhats and frame, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 35 mm thick, 2nd class hard wood plain framed panelled shutters (any number of panels) with lock rail and panels of timber float on both side (feather edged) or of veneered panticle board medium density wood particle board with commercial face veneers, supplied and fitted to chowkhats complete all as specified and directed.

S&F aluminium door shutter with frame of aluminium section standard size of 1.6mm thick with following specifications : - (a) Top rail, lock rail and style 80 x 45mm. (b) Bottom rail 150mm x 45mm. (c) Chowkhat 105 x 45mm. (d) 5.5mm thick tinted sheet glass jointing cleats, glazing clip rubber packing anodized aluminum snap beading. (e) Suitable automatic floor mounted hydraulic door closed heavy duty with pivot aluminium body ISI marked. Make: Everest. (f) Pad lock brass, 6 livers of make : Harrison/plaza. (g) Aluminum alloy anodized tower bolt 200mm long, 02 Nos to each leaf ( 12mm rod) (h) Aluminum anodized handle 300mm long, 02 Nos for each leaf. (Make: Aluminium section of Jindal/Indal/Hindalco or equivalent)

Supply & Fixing PVC door frame 50 mm x 47 mm made out of 5 mm thich plain colour PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail, lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS frame welded / sealed to stiles & rails with suitable PVC Sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 100 mm long butt hinges medium grade cold rollled mild steel and fixed complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed.

S&F 150 mm long aluminium handles cast type anodised complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

M&L 4.8 mm thick shet glass, ordinary quality and glazing with oil puty or wooden beads/PVC beads in square n exc 0.5 sqm in each pane complete all as specified and directed.

Dismantling of wall and celling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets. in any thickness incl cover fillets complete all as specified and directed.

Dismantling boarding any description/ thickness fixed in any position with nails complete all as specified and directed.

M&L Second class hard wood clean sawan boarding, 50 mm thick, with butt joints ln any situation fixed with nails complete all as specified and directed.

M&L Galvanized iron snap grid with powder coated section of size 24mmx38mmx0.7mm thick ‘T’ section and 25mmx25mmx0.35mm thick wall cleat of angle section and 4mm dia galvanized iron wire suspended with 4mm thick non AC board of Make : M/s EVEREST Industries Ltd of size 600mmx600mm and shall be fixed to galvanized iron snap grid of above section with mild steel screws as per manufacturer’s instructions including two coats of distemper oil emulsion over a coat of cement primer complete all as specified and as directed.

M&L for 4 mm thick plywood, grade BWR, type BB, fixed with nails to timber framework in ceiling, flat or sloping complete all as specified and directed.

M&L for second class hard wood plain fillets, square, rectangular or triangular in section, wrought secured with nails of sectional area exc 3 Sqcm and n.exc 6 Sqcm complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint over a coat of pink primer on wood/plywood surfaces, over 10cm width or girth complete all as specified and directed.

Demolition of concrete in ground floor and pavings nexc 15cm thickness including floor finishes like tiles if any of any description. (below or above ground level) complete all as specified and directed.

M&L for 75 mm 1:3:6 type C2 ( using 40 mm graded stone aggregate) as plinth protection./paving/footpath complete all as specified and directed.

M&L 25 mm thick PCC (1:2:4) type B-1 (20mm graded aggregate) as in sub base finishing the surface even and rough to receive the topping layer complete all as specified and directed.

M&L screed bed or bedding layer of mortar (1:4) 15 mm thick for laying floor finishers complete all as specified and directed.

M&L Vitrified tiles light shade10mm thick (square /retangular) area of each tiles exc 0.36 sqm but n exc 0.42 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in white or cloured cement to match complete all as specified and directed.

M&L non-skid ceremic tiles 7 to 8 mm th (square / rectangular) area of each tile exc 0.11sqm but n.exc 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed complete all as specified and directed.

Dismantling of floor, hearth or wall tiling,including cement morter bedding (but not backing)removing,serviciable tiles to store and rubbish off the premises complete all as specified and directed.

M&L rendering 10 mm thick on fair faces of brick/concrete work CM 1:4 rough to received tiles rough finished complete all as specified and directed.

M&L vitrified tiles light shade10mm thick (square /retangular) area of each tiles not exc 0.36 sqm skirtings etc. Set and jointed in neat cement slurry and pointed in white or cloured cement to match on vertical surface complete all as specified and directed.

M&L for Cloured Glazed ceramic tiles in vertical surface 600 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L for Cloured Glazed ceramic tiles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

Demolition of precast concrete block/stone boulder walling built in C.M. complete all as specified and directed.

M&L for pre cast cement concrete block 1:3:6 type C1 (using 20mm graded stone agg) 10 cm thick or widdh and setting in CM 1:6 complete all as specified and directed.

Materials and Labour for precast cement concrete block masonry (1:3:6) type C1 using 20 mm graded stone aggt with solid blocks, exc10 cm in width, set in cement morter (1:6) in wall complete all as specified and directed.

Material and labour for rendering 15mm thick cement plaster in cement mortar (1:6) on unfair faces of brickworks complete all as specified and directed.

Roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces,cleats etc. complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels complete all as specified and directed. (Note: Steel reinforcement shall be measured & paid separately)

Form work to faces of sides and soffits of floor or roof beams, cantilevers, shelves including supports, overhangs, etc for rough finished flat surfaces of concrete complete all as specified and directed.

S&F for TMT bars 10 mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.

TMT bars 8 to 10 mm dia in stirrups, spacers and binders, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.

M&L for preparation of old painted surfaces and apply one coat of synthetic ennamel paint of steel surfaces of any description over 10 cm width or girth, not otherwise described complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L preparation of new surface & applying two coats of cement based paints over a coat of cement primer on wall complete all as specified and directed.

M&L for Applying two coats of oil bound distemper on new plastered wall surfaces of any description over a coat of primer over J K wall putty 1 to 2 mm thick including preparation of plastered surfaces complete all as specified and directed.

Complete removal of existing treatment from wall surfaces by steel wire brushing and washing rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of 1:3 to obtain smooth regular/even finish using sand paper and incuding material & labour for old surfaces applying complete with J K wall putty 1 to 2 mm thick over one coat of primer and two coats of oil bound distemper in wall etc. all as specified and as directed by Engineer-in-Charge.

S&F in repair vitreous China wash down closet pan (pedestal pattern) white (excluding fixing bolts and flushing cistern) including down pipe, seat cover and flush pipe complete all as specified and directed.

S&F PVC valveless, syphonic action type flushing cistern 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

Supply only PVC flush pipe 32mm dia polyethylene of low or high density for low lewel flushing cistern complete all as specified and directed.

M&L in repair viterous china WHB, white flat back size 580x450mm exc taps, waste, chain and plug and porcelein stopper but including padestal/brackets complete all as specified and directed.

M&L in repair waste cuplings 32mm dia (half or full threads). (minimum weght 32 mm-45grms/40mm- 60grms) complete all as specified and directed.

S&F brass chromium plated shower rose 125mm size complete all as specified and directed.

S&F soap dish, viterous china white, appx size 160x160x90mm complete all as specified and directed.

S&F tower rail 450mm long of PTMT fixed with and including chromium plated brass screws and wodden/plastic cleats(minimum weght 190grms) complete all as specified and directed.

S&F 20mm outer dia 3-layer PP-R poly propylene random copolymer pipes SDR 7-4(PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including PPR plain & brass threaded polypropylene random fitting fixed complete to walls,ceilings or laid in floor complete all as specified and directed.

S&F 16mm outer dia 3-layer PP-R poly propylene random copolymer pipes SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including PPR plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or laid in floor complete all as specified and directed.

S&F stop cock fancy type 15mm dia CP high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair pillar taps 15mm bore dia,cast copper alloy with capstan heads,chromium plated,screwed down high pressure,with or without lettered 'Hot'or 'Coldwith long shanks and fly nuts,screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair bib taps 15mm bore dia, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Plain Cement Concrete (1:3:6) type C-1, using 20mm graded stone aggregate as in surface channel and drain including necessary formwork complete all as specified and as directed.

M&L for Walling of random rubble uncoursed,well bonded bedded and solidly hearted built in CM 1:6 including finishing the joints, flush as the work proceeds complete all as specified as directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses not exceeding 40mm depression complete all as specified and directed.

M&L raised pointing to random or polygonal rubble, uncoursed or brought course masonry in cement Mortar 1:4 complete all as specified and as directed.

M&L PVC (SWR) floor trap with grating including jointing withsolvent cement of 75mm dia

S&F PVC connector 15mm size with PTMT nuts of length 300mm complete all as specified and directed.

S&F PVC(SWR) pipe 110mm bore single socketed,in any length with rubber ring joints,laid in trenches or floor complete all as specified and directed.

Supply and fix 75 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or floor complete all as specified and directed.

S&F PVC (SWR) branch piece 110mm bore sigle (single Y) equal or unequal complete all as specified and directed.

E&M Work Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder,ceiling roses, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

Taking down carefully by unscrewing from board/outlet boxes, fittings and fixture such as main switches & DBs of any size and any capacity complete all as specified and directed

M/L for point wiring with 2 single core FRLS PVC insulated, unsheathed stranded copper conductor of size 1.5 sqmm in and including suitable size PVC casing & caping with teak wood boxes and 3mm thick plastic laminated sheet top cover for light/fan/socket controlled by one switch complet with 1.5 sqmm PVC insulated unsheathed multistandard copper conductor 1100 volts grade green colour for earth continuity all a specified and directed

All as per item No 78 here-in-before but for one 5 Amp socket outlet independent board complete all as specified and directed

All as per item No 78 here-in-before but for one 5 Amp socket outlet on the same board complete all as specified and directed

All as per item Ser No 78 above but for one 15 Amp socket outlet independent with 2 run of cable of size 4 sq mm and one run of 2.5 sq mm cable as earth continuity all as specified and directed

Supply and fixing switch piano flush type single pole one way 5 Amp 240 volts all as specified and directed

Supply and fixing for switch socket combination 2 in 1 , 5 pin 5 Amps flush type 240 volts all as specified and directed

Supply and fixing for switch socket combination multipurpose 15 A flush type, 5 in 1 240 volts all as specified and directed

S&F for ceiliing rose three terminal surface type bakelite 65x50 mm all as specified and directed.

Supply and Fixing LED Panel 2 X 2 , 34 watts environmental friendly new generation aesthetically designed ultramodern recess mounting luminaire with high brightness SMD LED as light source suitable for armstrong / grid ceiling , Cat Part No- BZRSQL GX 34W CW, Make - Havells, C&S, Bajaj, Wipro or Equivallent.

Supply & fixing Surface and wall mounted LED batten 20 watt extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver with LED Lamp complete all as specified and directed. Make: BAJAJ (Cat Part No - BCLSBAL 20W CW) & equivalent make specified.

S&F battern LED light fittings, 1x10W luminiaries with lamp holder, etc. Complete with all acessories and including connecting upwith twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete all as specified and directed. Make- BAJAJ cat part No - BCLSB 10 NW & equivalent make specified.

S& F Lamp Holder PVC/ Polycarbonate type with Back plate suitable for batten fitting.

S & F LED Bulb of capacity 10 watt bulb lamp pin type suitable for fixing in pin holder . Make - Havells/ CG/ Bajaj.

Supply & Fixing sheet metal enclousers with socket plug top and MCBs single pole all as specified and directed

Supply and fix sheet metal enclosures for DBs (Double door type) when MCBs to be used 240 volts 8 way with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed.

Supply and Fixing only MCB SP, 240V,6 to 32 Amps,10 KA complete all as specified and directed.

Supply and Fixing MCB SPN 240V 40 Amps,10 KA complete all as specified and directed.

M&L in replacement of circuit/submain wiring alongwith earth wire with the size of 2x4 Sqmm + 1x2.5 Sqmm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/recessed as required in and including PVC casing caping complete fixing on wall, roof and floor all as specified and directed.

Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized iron strip 32x6mm as earthing lead by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1, cover slab 54 cm x 54 cm x 5 cm, reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways, one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil, dismantling and taking out old earthing plate and necessary testing complete all as shown on electrical plate No 5 of SSR Part –I (2009) complete all as specified and directed.

Supplying, Laying, Fixing & Testing water Heater 25Ltr with Adjustable Knob for temperature setting, Rust & Shock proof ABS outer body, Vitreous enemal coated tank & compact & easy to install. Complete with all fittings & all accessories> Complete all as specified & directed . Make Havells BUENO25L WhiteBlue/Ivory Brown & equivalent.

M/S GLOBAL ROYAL CONSTRUCTION

M/S ARUNACHAL VIKASH

M/S TSERING DHONDUP

M/S KESANG CONSTRUCTION

M/S NAVA BHARAT BUILDERS

M/S L G BUILDERS