Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹20.6 LAdmitted-Finance | -27.58% | ₹20.6 L | L1 | Admitted-Finance |
| 2 | L2₹21.3 LAdmitted-Finance | -25.01% | ₹21.3 L | L2 | Admitted-Finance |
| 3 | L3₹22.2 LAdmitted-Finance | -22.00% | ₹22.2 L | L3 | Admitted-Finance |
| 4 | L4₹22.7 LAdmitted-Finance | -20.00% | ₹22.7 L | L4 | Admitted-Finance |
| 5 | L5₹24.8 LAdmitted-Finance | -12.95% | ₹24.8 L | L5 | Admitted-Finance |
Tender Value
₹28.4 L
EMD Value
₹56,880
Closing Date
4 Feb 2026, 5:00 pmClosed
XEN R AND B DIVISION KATRA
XEN R AND B DIVISION KATRA
BOQ
2026_PWDJK_301555_1
e-NIT No. 36 of 2025-26 Dt. 27-01-2026
Open Tender
Civil Works
240 days
KATRA
NIT
2 documents required · 2 mandatory
₹600
Yes
XEN R AND B DIVISION KATRA
₹56,880
Yes
13 Feb 2026
28 Jan 2026
5 Feb 2026
28 Jan 2026
4 Feb 2026
28 Jan 2026
Construction of ACR (2 units) at Middle School Kun Kanyala, Distict Reasi Under SAMAGRA SHIKSHA PAB 2025-26 (20.84 lacs)
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. All kinds of Soil.
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40mm nominal size) Crushed .
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)
Reinforced cement concrete work in walls (anythickness), including attached pilasters, buttresses,plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floorfive level excluding cost of centring, shuttering, fmishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size.
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size)
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)
Extra for brick work with common burnt clay bricks / cement concrete bricks in superstructure above plinth level upto floor five level.
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
Centring and Shuttering including strutting, propping etc and removal of form work for Foundations, footings, bases for columns.
Centring and Shuttering including strutting, propping etc and removal of form work for Lintels, beams, plinth beams,girders, bressumers and centilevers.
Centring and Shuttering including strutting, propping etc and removal of form work for columns, pillars,piers ,abutments ,posts and struts.
Centring and Shuttering including strutting, propping etc and removal of form work Suspended floors, roofs, landings, balconies and access platform
Centring and Shuttering including strutting, propping etc and removal of form work for Edges of slabs and breaks in floors and walls.Under 20cms wide
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand).
12mm cement plaster of mix 1:6 (1 cement : 6 coarse sand)
15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6( 1 cement : 6 coarse sand)
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 35 mm Thick 2nd class kailwood
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Particle Board 12mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.35mm thick second class Kail wood
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250 x 16mm
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
Handle 125mm
Handle100mm
Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper
Providing and fixing bright finished brass hard drawn hooks and eyes; 100 mm
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.
Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre,two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work.
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes 110 mm diameter.
Providing and fixing on wall face unplasticised- PVC moulded fittings/accessories for unplasticised - Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 1 0 mm gap for thermal expansion. 110mm Bend
Lettering with black Japan paint of approved brand and manufacture.
Carriage of materials by mechanical transport including loading / unloading and stacking complete. Sand lead up to 20 kms.
Carriage of materials by mechanical transport including loading / unloading and stacking complete. Stone aggregate lead up to 20 kms.
Carriage of materials by mechanical transport including loading / unloading and stacking complete. Stone aggregate(above 40mm) lead up to 20 kms.
Carriage of materials by mechanical transport including loading / unloading and stacking complete. Bricks lead up to 25 kms.
Construction of Boundary Wall at Middle School Kun Kanyala Under SAMAGRA SHIKSHA (PAB 2025-26) District Reasi (7.60 lacs)
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works upto plinth level in (1:5:10) grade with 40mm nominal size of crushed stone aggre-gates.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works upto plinth level in (1:3:6) grade with 20mm nominal size of crushed stone aggre-gates.
Dumping of stones in horizontal on level including cost of stone & carriage, complete
Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1cement: 6 coarse sand) & extra for brick work in superstructure above plinth level upto floor V level. (by manual means)
Extra for brick work in superstructure above plinth level upto floor V level. (by manual means)
Centring and Shuttering including strutting, propping etc and removal of form work for Foundations, footings, bases of columns etc. for mass concrete
12 mm Cement plaster of mix 1 : 6 (1 cement : 6 coarse sand)
15 mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 (1 cement : 6 coarse sand)
Providing and Laying DPC 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 crushed stone aggregate 20 mm nominal size)
Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying including cutting, hoisting, fixing in position and applyinga priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladders,railings, brackets, gates & similar works
Painting with ready mixed synthetic enamel paint ofapproved brand and manufacture in all shadestogive aneven shade New steel work (two or more coats)
Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10sqm
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with10 mm diameter bolts, nuts and wooden plugs and embeddings in cementconcrete block 30x10x15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 gradedstone aggregate 20 mm nominal size)
Carriage of materials by mechanical transport inculding loading / unloading and stacking complete.
Sand lead up to 20 kms.
Stone aggregate below 40 mm lead up to 20 kms.
Stone aggregate above 40 mmlead up to 20 kms.
Bricks lead up to 25 Kms.
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.22 MB
BOQ_978491.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid