Interior, Renovation, Furnishing and Electrical work at Fourth and Fifth Floor, Vindhyachal Bhawan Bhopal

Amount

Lock - Providing and fixing bright finished mortice latch and lock ISI marked with six lever and a pair of anodised(anodic coating not less than grade AC 10 as per IS:1868 aluminuium lever handles with necessary screws etc complete. Best make of approved quality.

Providing and fixing Satin stainless steel finish 400x16 mm sliding door bolts with nuts and screws etc. complete.

Providing and fixing Satin stainless steel finish 600 mm and 32mm dia Handle H Type with nuts and screws etc. complete.

Providing and fixing Dorma TS-68 door closure with standard arm EN2/3/4, necessary accessories and screws etc. complete.

Providing Euro prafic desing , louvers mdae of MDF Material , light weight water reststant leamate & borer rststant with approved colour smooth laminate with plant finish portst fernig dulyfixed with hat glue on both surface.

Providing and fixing painting work made out of canvass by acrylic /oil paint colours as per design with framing work etc. complete in all respect as per direction given by Engineer in charge.

Providing and fixing steel dustbin with cover and rubber base for water protection perforated design as per direction of Engineer in charge.

ROLLER BLINDS:- Providing and fixing of roller blinds of washable fabric duly fixed with powder coated channel and clamps having nylon code for operation of approved color etc. complete in all respect as per direction given by Engineer in charge. (Vista / NBT /MAC/ WINDOW TECH )

Providing And Placing of EXECUTIVE MAIN TABLE + SIDE TABLE WITH PEDESTAL : The Main Table should be of Size - 2100 x 900 x 750 with ERU With Pedestal of Size - 1200 x 500 x 750. The primary work surface should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Softclosing access flap with in-BACK UNITild power box are provided on work surface for wire management Secondary work surface ( ERU ) of size - 1200 x 600 x 750 should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening Pedestals are provided with lock for security. Furniture Make- Haworth/Herman Miller/Godrej/Knoll (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge.

Two seater Sofa - Providing and fixing in position fully upholstered sofa made with 18mm BWP ply and B grade teak wood frame. flat spring below foam at seat, stitching, slopes color, hemming with seat of 80mm thick softy foam and reckon filler, 100mm 40 density foam on back and arm with 40mm thick high density foam, seat and back covered with best quality markeen, and finished in fabric (of not less than Rs 1000 per mtr) of approved colour, texture and quality including teak wood molding / frame sofa to be made in the module of two seater with arms on both face, seat size 500x550mm over all depth 700mm. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge.

Table counter, 600 mm wide - Providing and fixing table of specified size to be made up of 18MM BWP ply as per drawing using approved make hardware, having a storage unit with one drawers as per given drawing. Provision has to be made for keyboard tray, CPU stand. All exterior surfaces to be finished in 1.0mm laminates / corian as required specified by Architect and inner surfaces finished in 1.0 mm laminate of approved shade with necessary hardware such as handles wire manager, telescopic drawer slides, etc as per design all exposed edges to be finished with first quality Teak Wood beading which is to be melamine polished / pu coating. The cost is inclusive of all materials and labour etc complete in all respect as per drawing and direction given by Engineer in charge.

Table 1800 x 750 x 750 - Providing and fixing table of specified size to be made up of 18MM BWP ply as per drawing using approved make hardware, having a storage unit with three drawers as per given drawing. Provision has to be made for keyboard tray, CPU stand. All exterior surfaces to be finished in 1.0mm laminates/ corian as required specified by Architect and inner surfaces finished in 1.0mm laminate of approved shade with necessary hardware such as handles wire manager, telescopic drawer slides, etc as per design all exposed edges to be finished with first quality Teak Wood beading which is to be melamine polished / pu coating. The cost is inclusive of all materials and labour etc complete in all respect as per drawing and direction given by Engineer in charge.

Providing and fixing of Conference Hall /Marketing room Table 600mm. wide made of 18MM BWP ply finished with 1 mm thick laminate inner and outer side. The table top front will be 24mm. thick with teak wood beading. Provision for foot rest, wire manager shall be made. all exposed edges to be finished with first quality Teak wood beading which is to be melamine polished/ pu coating. The cost is inclusive of all materials and labour etc complete in all respect as per drawing and direction given by Engineer in charge.

Providing and fixing of storage units (laminate finish) (450 mm wide) - Providing and fixing at site file / storage cabinet made up of 18MM BWP ply with 1mm thick laminate as per drawing. All shelves and partitions to be made up of 18MM BWP ply and Pallah to be made up of 12mm. thick BWP ply fixed with hinges of approved make. All exposed edges to be finished with 1st quality teak wood beading to be melamine polished / PU coating and all inside surfaces to be finished with 1.00mm laminate. The cost is inclusive of all materials accessories, SS handles, lock, labour, etc. complete in all respect as per drawing and direction given by Engineer in charge.

Providing And Placing of Versa Neo VISITOR CHAIR FIXED : The chair should be of size 60.9 (W) x 64.3 (D) 99.5cm cushioned seat is to be made of injection molded plastic outer & inner. Plastic inner shall be upholstered with leatherette and moulded high resilience ( H R) Polyurethane foam of density 45+/-2kg/m compression. Seat Size should be 47.0 cm(W) x 48.0cm (D).The cushioned back is to be made of PU Foam with insitu molded MS E.R.WRound Tube of size 1.9+/-0.03cm x 0.16+/-0.0128cm. duely upholstered with leatherette. Mechanism - the tubular frame shall be cantilever type & made up of 02.54+/-0.03cm x 0.2+/-0.016cm thk S.S 202 tube. The back connect to frame through powder coated (DFT 40 -60 microns) high pressure die cast connector piece. Furniture Make- Haworth/Herman Miller/Godrej/Knoll (Greenguard GOLD/GRIHA/BIFMA Level 2 Certified) Design as approved by Engineer-In-charge.

The seat and back shall be made up of 1.2+/-0.1cm thick hot pressed plywood and Upholstered with fabric and moulded polyurethane foam all around. The moulded polyurethane foam shall be of density 55+/-5 kg/m ³, and hardness load 15-20 kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 49.0cm(W) x 44.0cm(D) and of back shall be 50 cm(W) x 47.0cm(H).The armrests should made of black integral skin polyurethane with 40-55 shore hardness and reinforced with M.S insert .The mechanism of the chair shall have following features : 360⁰ revolving type, Synchro single position mechanism, Tilt tension adjustment . The chair shall be provided with pneumatic height adjustment which shall have stroke of 12 cm. The pedestial shall be injection moulded in black glass-filled Nylon. It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65 +/- 1 cm pitch-centre-dia (70 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall dimensions of Chair shall be, Width of Chair - 70cm, Depth of Chair - 70 cm as measured from pedestal below. Height from ground - min 92.0 to max 104 cm. Seat height - min 45.0 to max 57.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA X7.1standards(HAWORTH/HERMANMILLER/GODREJ/WIPRO/FEATHERLITE/HOF. MAKE )

The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W)-46 cm, (H)-55 cm & size of seat shall be (W)-48 cm x (D)-44.0cm. Armrest is fixed . The arm top is made of soft moulded PU .The mechanism of chair shall have following features:360 degree revolving type, Synchro mechanism, Tilt tension adjustment, multi position tilt limiter with Back-safety return feature. The chair shall be provided with pneumatic height adjustment which shall have stroke of 95 +/- 5 mm. The pedestal shall be made of nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in PP . Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 95 to max 104 cm. Seat height - min 45.0cm to max 54.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards (HAWORTH / HERMANMILLER/ GODREJ/ WIPRO/ FEATHERLITE/HOF. MAKE )

Providing & Fixing of 24-Port Data Switch of [Managed Layer-2 with 2-Giga Ports (10/100/1000) ] Make: D-link/Cisco/Netgear

providing and Fixing of Boundary Microphone Impedance: 150 ohm Noise: 22 dBA Sensitivity: -30 dBV DC Voltage: 48 Volts Maximum SPL (Sound Pressure Level): 120 dB Product Weight: 0.59 lbs Cable Length: 15 ft Color: Satin Black Warranty (Length/Type): Minimum Frequency Response (Bandwidth): 50 Hz Minimum Frequency Response (Bandwidth): 0.05 kHz Maximum Frequency Response (Bandwidth): 20000 Hz Maximum Frequency Response (Bandwidth): 20 kHz Microphone Connectivity - Wired Microphone Type - Boundary Polar/Pickup Pattern - Supercardiod. Make : (AKG/Sure/Senhisher)

Providing ad Fixing of Conferencing Processor with AEC 12 Analog Inputs (with 48v Phantom Power per Channel) 8 Analog Outputs Configurable Signal Processing 12 Channels of AEC Processing with Auto Gain Control and Noise Cancellation Rich Palette of Processing and Logic Objects 48 Channel, Low Latency, Fault Tolerant Digital Audio Bus Clear Front Panel LED Indication Bi-Directional Locate Functionality 12 Control Inputs and 6 Logic Outputs for GPIO Integration Make : (BSS/Clearone/Kramer)

providing and Fixing of high Quality Signal Cable Jacket PVC, ø 8.80 mm, marine blue Shield No. 1 Bare copper wires (0.10 mm), 100% coverage Shield No. 2 Bare copper wires (0.10 mm), 100% coverage Layer Polyester nonwoven thermally bonded, both sides alum. coated Separation Filler material viscose Conductor shield layer Polyester nonwoven thermally bonded, both sides alum. coated Cond. copper shield Bare copper wires (0.10 mm), 100% coverage Isolation Cellular PE, ø 2.00 mm, 4 different colors Conductor Stranded bare LCOF copper wires, 64 x 0.10 mm (4x) (0.50 mm²)

Providing and Fixing of of System Interconnects

Supplying, installation & testing of 85" 4K UHD LED display with 400 Cd/m2 HDMI In x 2, DVI-D in x1, USB x3, VGA x 1, PC Audio in x1, Audio Out x1, AV Out x 1, RS232C in x 1, RJ45 x , AV Out x 1, HDMI Out x 1, 20W inbuilt Speakersm IPS LED Display, 4k@ 60P complete. Make : LG/Sony/Samsung.

Supplying, installation & testing of 65" 4K UHD LED display with 400 Cd/m2 HDMI In x 2, DVI-D in x1, USB x3, VGA x 1, PC Audio in x1, Audio Out x1, AV Out x 1, RS232C in x 1, RJ45 x , AV Out x 1, HDMI Out x 1, 20W inbuilt Speakersm IPS LED Display, 4k@ 60P complete. Make : LG/Sony/Samsung.

Supplying, installation & testing of 43" 4K UHD LED display with 400 Cd/m2 HDMI In x 2, DVI-D in x1, USB x3, VGA x 1, PC Audio in x1, Audio Out x1, AV Out x 1, RS232C in x 1, RJ45 x , AV Out x 1, HDMI Out x 1, 20W inbuilt Speakersm IPS LED Display, 4k@ 60P complete. Make : LG/Sony/Samsung.

Supplying, Installation, testing & commissioning of HDMI Switcher with 4 Nos. Of HDMI Input and 4 Nos HDMI Output Make : Kramer/Fidelity/Extron

Audio Equipment Rack : Providing & Fixing of pre-wired standard 19”Audio Equipment Rack made of Die extrusion aluminum with front /rear doors, power panels, casters wheel and cooling fan etc suitable enough to accommodate all Rack mounted Audio equipment.

Supply, Installation, Testing & Commissioning of Wi-Fi Router, Simultaneous dual band 2.4 GHz & 5 GHz, Five (5) 10/100/1000 (1 WAN and 4 LAN) Gigabit Ethernet ports with auto-sensing technology, 802.11 b/g/n/ac Supported as per technical specification.

Providing & Laying of 2-core 2.5 sq. mm. Shielded Twisted pair loudspeaker cable. Make : Liberty/Finolex/Lapp

Handheld type Cordless Microphone : Providing & Fixing of professional Handheld / Lavalier type Cordless Microphone. Make : AKG/Shure/Senhisher

Providing and fixing plain lining with necessary screws/nuts and bolts/ nails including a coat of approved primer on one face and fixed on wooden /steel frame work complete as per direction of Engineer-in-charge. (Frame work shall be paid for separately) 18mm thick commercial ply conforming to IS: 1328 BWR type.

Supply and fixing as per specification wireless remote door call bell/buzzer of approved make with necessary materials complete.

Providing & Fixing 300mm dia Analog wall clock Make: Ajanta/Oriva.

Providing & Fixing Name plate material Acrylic/vinayal with fastner nut/bolt etc. complete Note:- The Bidder Shall quote his own rates for item rates 1 to 35

Bidder Name

Amount

ABBOTTSONS IMPEX PVT LTD(GSTN-23AAECA7527R1Z9)