REPAIR/ REPLACEMENT OF UNSV POINT WIRING, FITTING/ FIXTURE, DB, UNSC EARTHING, OFFRS ACCN, MNS AREA, WARDS, MH LINE AND NEW OPD COMPLEX AT ZONE B AT BHDC UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendent, regulator socket etc shall be measured and paid separately) and making good disturbed surfaces of wall floor etc complete all as specified and as directed.

M&L point wiring for modular switches with 1.5 Sqmm, PVC insulated, unsheathed, multistranded, copper conductor Cable, FRLS, 1100 Volt grade, drawn through and including concealed, rigid non-metallic PVC Conduit of minimum 25mm dia medium grade with all fittings, including cadmium plated screws as per IS, including 1.5 Sqmm size, PVC insulated, unsheathed multistranded, copper earth continuity conductor FRLS, connected to earth dolly, suitable for One light/fan/bell point controlled by one No, 5 Amp, one way switch/bell push complete including making good disturbed surfaces to match with existing all as specified and as directed.

All as per item No. 2.00 here in before but for one three pin, 5 Amp, socket out let on independent board complete all as specified and as directed.

All as per item No. 2.00 here in before but for one three pin, 5 Amp, socket out let on same board complete all as specified and as directed.

All as per item No. 2.00 here in before but for one light point controlled by two Nos, two way switches complete all as specified and as directed.

All as per item No. 2.00 here in before but point wiring with 2.5 Sqmm, multistranded, copper conductor cable, for 15 Amps socket outlet on independent board with 2.5 Sqmm size earth conductor complete all as specified and as directed.

All as per item No. 2.00 here in before but point wiring with 2.5 Sqmm, multistranded, copper conductor cable, for 15 Amps socket outlet on Same board with 2.5 Sqmm size earth conductor complete all as specified and as directed.

All as per item No. 2.00 here in before but point wiring with 4 Sqmm, multistranded, copper conductor cable, for AC point on independent board with 4 Sqmm size earth conductor complete all as specified and as directed.

M&L point wiring for normal switches with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed (FRLS) cable 1100 Volts grade, drawn through existing concealed Conduit including cadmium plated screws as per ISI, including replacement of 3 mm thick phenolic laminated sheet top covers on and including sunk type CI/steel terminal boxes concealed in wall including 1.5 Sqmm size pvc insulated unsheathed multristranded copper earth continuity conductor FRLS to common earth and connecting to earth dolly for One light/fan/bell point controlled by one No 5 Amp, one way switch/bell push complete all as specified and as directed. Make-Havells/Finolex/Polycab

All as per item No. 9.00 here in before but for one three pin, 5 Amp, socket out let on independent board complete all as specified and as directed.

All as per item No. 9.00 here in before but for one three pin, 5 Amp, socket out let on same board complete all as specified and as directed.

All as per item No. 9 but one light point controlled by two way switch.

All as per item No. 9.00 here in before but point wiring with 2.5 Sqmm, multistranded, copper conductor cable, for 15 Amps socket outlet on independent board with 2.5 Sqmm size earth conductor complete all as specified and as directed.

All as per item No. 9.00 here in before but point wiring with 4 Sqmm, multistranded, copper conductor cable, for AC point on independent board with 4 Sqmm size earth conductor complete all as specified and as directed.

S&F in replacement modular cover plate with frame, 1 or 2 module complete all as specified and as directed.

S&F in replacement modular cover plate with frame, 3 modules complete all as specified and as directed.

S&F in replacement modular cover plate with frame, 4 modules complete all as specified and as directed.

S&F in replacement modular cover plate with frame, 6 modules complete all as specified and as directed.

S&F in replacement modular cover plate with frame, 8 modules complete all as specified and as directed.

S&F in replacement modular cover plate with frame, 12 modules complete all as specified and as directed.

S&F in replacement modular metal flush box, 1 or 2 modules complete all as specified and as directed.

S&F in replacement modular metal flush box, 3 modules complete all as specified and as directed.

S&F in replacement modular metal flush box, 4 modules complete all as specified and as directed.

S&F in replacement modular metal flush box, 6 modules complete all as specified and as directed.

S&F in replacement modular metal flush box, 8 modules complete all as specified and as directed.

S&F in replacement module metal flush box, 12 modules complete all as specified and as directed.

S&F in replacement modular switch, 1 way, 6 Amp, 1 Module, complete all as specified and as directed.

S&F in replacement modular switch, 2 way, 6 Amp, 1 Module, complete all as specified and as directed.

S&F in replacement modular bell push, 6 Amp, 1 Module complete all as specified and as directed.

S&F in replacement modular Socket, 6Amp, 2/3 Pin, combined, 2 module complete all as specified and as directed.

S&F in replacement modular switch, 1 way, 16 Amp, 1 Module, complete all as specified and as directed.

S&F in replacement modular Socket, 16/6 Amp, 3/5 Pin, combined, 2 module complete all as specified and as directed.

S&F in replacement modular Fan step regulator, 120W - 1 module complete all as specified and as directed.

S&F in replacement Plug Top, 5 Amps, 230 Volts, white, polycarbonate body, 3 pin type, including connecting complete all as specified and as directed.

S&F in replacement Plug Top, 15 Amps, 230 Volts, white, polycarbonate body, 3 pin type, including connecting complete all as specified and as directed.

S&F in replacement Lamp holder, white, Polycarbonate body, with back plate, suitable for batten fittings, fixed in position & connecting complete all as specified and as directed.

S&F in replacement Ceiling rose, PVC/ polycarbonate, isolated body type, three terminal, 240 volt, fixed in position & connecting complete all as specified and as directed.

S&F in replacement Bell ding dong, AC, 230 Volts, fixed in position & connecting complete all as specified and as directed.

S&F in replacement LED Driver 36/39 watt , 240 volt , 50 Hz for 2x2 LED light fitting & connecting all as specified and as directed.

Supply and fix Switch Piano type, white polycarbonate body, single pole, one way 5 amp, 230 V, including connecting complete.

Supply and fix Switch Piano type, white polycarbonate body, single pole, one way 15 amp, 230 V, including connecting complete.

Supply and fix Socket outlet 2 in 1, 3 pin, 5 and 15A - 230 V, Multipurpose flush type, including connecting complete.

Supply and fix Socket outlet 2 in 1, 3 pin, 5A ,230 V including connecting complete.

Supply and fix stepped type electronic fan regulator, white polycarbonate body, flush type, 230 V, including connecting complete.

S&F in replacement sub main wiring with 2 runs of 4 Sqmm, single core, PVC insulated & unsheathed cable FRLS, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 20 mm dia, concealed, PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 4 Sqmm single core size PVC insulated copper conductor FRLS including making good disturbed surfaces to match with existing complete all as specified and as directed. Note:- Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).

S&F in replacement sub main wiring with 2 runs of 6 Sqmm, single core, PVC insulated & unsheathed cable FRLS, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 25 mm dia, concealed, PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 6 Sqmm single core size PVC insulated copper conductor FRLS complete including making good disturbed surfaces to match with existing all as specified and as directed. Note:- Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).

S&F in replacement sub main wiring with 4 runs of 10 Sqmm, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 32 mm dia, concealed, PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 10 Sqmm size PVC insulated copper conductor complete all as specified and as directed. Note:- Four run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).

S&F in repair load line, distribution board, double door type, TPN, vertical, 4 way, suitable for accomodating upto 125 Amps MCCB with incomming frame three pole, including 250 Amp copper bus bar, neutral link, blanking plates etc complete all as specified and as directed. (Make : Legrand or equivalent in L&T/ Indoasian/ ABB/Siemens/Havells)

S&F in repair load line, distribution board, double door type, TPN, vertical, 8 way, suitable for accomodating upto 125 Amps MCCB with incomming frame three pole, including 250 Amp copper bus bar, neutral link, blanking plates etc complete all as specified and as directed. (Make : Legrand or equivalent in L&T/ Indoasian/ ABB/Siemens/Havells)

S & F in repair for distribution board double door type, SPN, 12 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed. (Make : Legrand or equivalent in L&T/ Indoasian/ ABB/Siemens/Havells)

S & F in repair for distribution board double door type, SPN, 8 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed. (Make : Legrand or equivalent in L&T/ Indoasian/ ABB/Siemens/Havells)

Supply, fixing and connecting in replacement recessed mounting back- lit LED 2X2, 36 watt tile in CRCA housing with full opal diffuser suitable for Armstrong/ Grid Ceilings Type, size 595X595mm (Nominal),High lumen efficacy LED with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection minimum 2.5KV, safety & performance test as per IS:15885 Total system Lumen not less than 3600, in Cool day Light (6500K), Power factor>0.95, CRI (Ra) >80 with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed. Make : ORIENT Model No :- LTRAQ-36-C-VO or equivalent in Havells/ wipro

Supply, fixing and connecting in replacement of Slim LED Batten 10 watt with Surface/Wall Mounted integrated LED 2 feet Fitting Polycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to 2.5 KV . Total system Lumen of 10W Led should be 1000 or above in Cool day Light(6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed.Make : ORIENT Model No :- LBLN-10-C- SQ or equivalent in Philps/ polycab

Supply, fixing and connecting in replacement of Slim LED Batten 20 watt with Surface/Wall Mounted integrated LED 4 feet Fitting Polycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to 2.5 KV . Total system Lumen of 20W Led should be 2000 or above in Cool day Light(6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed.Make : ORIENT Model No :- LBLN-20-C- SQ or equivalent in Philps/ polycab

S&F in replacement Bldg security light fitting LED 25 Watt, highly efficient IP66 LED, high power having aluminium pressure die cast housing and PC cover in the front and high power lens for batwing light distribution with electric connection with suitable size of PVC insulated copper wire including GI bracket 1.5 Mtr with clamps and bolts complete all as specified and directed. Make : ORIENT Model No :- LSFS-25-CF-PC or equivalent in Philps/ wipro

Supply, fixing and connecting in replacement of Ultra Slim recess mounting round LED down light 6 watt with excellent thermally manged aluminium pressure die cast housing for larger surface area finished in epoxy powder coated white to deliver high efficacy light output complete all as specified and as directed.Make : ORIENT Model No :- LDRER-06-C-V1 or equivalent in Philps/ wipro

Supply, fixing and connecting in replacement of Ultra Slim recess mounting round LED down light 12 watt with excellent thermally manged aluminium pressure die cast housing for larger surface area finished in epoxy powder coated white to deliver high efficacy light output complete all as specified and as directed.Make : ORIENT Model No :- LDRER-12-C-V1 or equivalent in Philps/ wipro

Supply, fixing and connecting in replacement of Ultra Slim recess mounting round LED down light 15 watt with excellent thermally manged aluminium pressure die cast housing for larger surface area finished in epoxy powder coated white to deliver high efficacy light output complete all as specified and as directed.Make : ORIENT Model No :- LDRER-15-C-V1 or equivalent in Philps/ wipro

S&F CUBOID LOW HEIGHT Ceiling fan 400mm sweep, 230 Volt, 50 Hz, speed 1750 RPM , type with built in LED light and remote controll in white colour with connection incl necessary cutting in ceiling complete all as specified and directed. MAKE - HALONIX

S&F Automatic infrared Sensor High Jet Speed Fast Dry Hand Dryer Machine complete all as specified and directed. MAKE - Plus F- ASSURED

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts, checknuts and washers of galvanized iron or steel as shown in electrical plate No 3 connected to earthing test point including testing on completion all as directed. Note:- The unit rate quoted shall be include for necessary excavation and earth work , earth strip connected to test point max 7 mtr as per site requirement, PCC 1:3:6 type for earth pit & Pit cover, funnel with wire mesh including GI medium grade watering pipe 15mm bore & 25 mm dia for supporting of earth strip/wire.

Taking down ceiling fan, exhaust fan including connection cable, dismantling blades and refixing & reconnecting the same after necessary repair/rewinding/painting etc complete all as specified and as directed. Note: Servicing/Rewinding/Painting of Fan shall be measured and seprately under respective item of this Schedule.

M & L for painting of ceiling fans/ exhaust fan complete, with syntetic enamel paint as per existing color by one coat spray painting including filling cavities with filler, including cleaning all dust complete all as specified and as directed.

M&L for servicing of ceiling fans/exhaust fan/wall fan /padestal fan of any Make and sizes, carrying out minor repair such as greasing, oiling, fitting, testing complete all as specified and as directed.

M&L rewinding ceiling fan of any make and model, 1200 /1400 mm sweep, with super enamelled copper wire of required size, duly varnishing with high quality Varnish, including greasing & servicing and testing including taking down old winding wire complete all as specified and as directed.

All as per item No. 65.00 here in before but rewinding Exhaust fan of size 200mm to 300mm complete all as specified and as directed.

All as per item No. 65.0 here in before but rewinding Paedestal fan of size 400mm complete all as specified and as directed.

All as per item No. 65. 00 here in before but rewinding wall fan of size 400 mm complete all as specified and as directed.

S&F in replacement bearing No 6200/6201/6203/6204 suitable for Ceiling fans/Exhaust fan of existing make and size, for proper running including testing complete all as all as specified and as directed. (Note: Testing shall be done in MES store yard at contractor's expense).

S&F in replacement bush suitable for Ceiling fans/Exhaust fan/padestal fan/wall fan of existing make and size, for proper running including testing complete all as all as specified and as directed. (Note: Testing shall be done in MES store yard at contractor's expense).

S&F in replacement capacitor 2.5 Mfd complete all as all as specified and as directed.

S&F in repair Fan rod, 1.5 feet long, made out of 20 mm bore GI pipe light grade, with necessary clamps & nut bolt and other accessories complete all as specified and as directed.

S&F in repair Fan rod,2/3 feet long, made out of 20 mm bore GI pipe light grade, with necessary clamps & nut bolt and other accessories complete all as specified and as directed.

S&F in repair Fan rod, 2.5 feet long, made out of 20 mm bore GI pipe light grade, with necessary clamps & nut bolt and other accessories complete all as specified and as directed.

S&F in repair PVC casing caping, medium grade, size 25 X 16 mm, including necessory accessories (Tee, elbow etc) & clamp, screw, rowel plug etc. complete all as specified and as directed.

S&F in repair Rigid, non-metallic, PVC conduit, medium grade, 20mm bore, including all fittings such as tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and as directed.

All as per item No 76.00 here in before but 25 mm bore complete all as specified and as directed.

S&F in repair modular blanking plate, 1 Module complete all as specified and as directed.

S&F in repair Plastic surface box 3 module for 3 Module Sheet cover complete all as specified and as directed. Make - Anchor Roma/ indoasian

S&F in repair Plastic surface box 6 module for 6 Module Sheet cover complete all as specified and as directed. Make - Anchor Roma/ indoasian

S&F in repair Plastic surface box 12 module for 12 Module Sheet cover complete all as specified and as directed. Make - Anchor Roma/ indoasian

S& F PVC exhaust fan 250 mm sweep 240 Volt, 1325RPM , Air delivery 500 CMM connection with self closing louver frame flexible PVC copper wire from ceiling rose to exhaust fan including provn of opening of hole on brick wall and grouting nut and bolt of suitable size complete all as specified and directed. Make:-Havells/Bajaj / CG

S& F PVC exhaust fan 300mm sweep 240 Volt, 1325RPM , Air delivery 500 CMM connection with self closing louver frame flexible PVC copper wire from ceiling rose to exhaust fan including provn of opening of hole on brick wall and grouting nut and bolt of suitable size complete all as specified and directed. Make:-Havells/Bajaj/ CG

Cutting chases, pinning in, including making good in cement mortar 1:3 including painting to match with the existing surface as in edges of landings, steps, cills, sunshades, shelves, lintels, etc; and for concealed conduit wiring, etc, cutting not exc10 cm girth complete all as specified and as directed.

S&F sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin earth plug and socket complete with one MCB of capacity 20 Amps , 240 Volts complete all as specified and directed. Make:-Legrand/seimens/ schneider/Indoasian.

S & F in repair MCCB 415 V, 125 Amps, 25 KA, 4 Pole complete all as specified and directed.Make -Legrend / ABB / Seimens/Indoasian

S & F in repair MCCB 415 V, 100 Amps, 35 KA, 4 Pole complete all as specified and directed.Make - Legrend/Havells/Seimens/Indoasian

S & F in repair MCB TPN, 415 Volts, 63 Amps complete all as specified and directed. Make-Legrend / Havells/ Seimens/Indoasian

S & F in repair MCB TP, 415 Volts, 40 Amps complete all as specified and directed. Make-Legrend / Havells / Seimens/Indoasian

S & F in repair MCB DP, 240 Volts, 40 Amps complete all as specified and directed. Make-Legrend / Havells / Seimens/Indoasian

S & F in repair MCB DP, 240 Volts, 63 Amps complete all as specified and directed. Make-Legrend / Havells / Seimens/Indoasian

S & F in repair MCB SP, 240 Volts, 16 Amps complete all as specified and directed. Make-Legrend / Havells / Seimens/Indoasian

S & F in repair MCB SP, 240 Volts, 10 Amps complete all as specified and directed. Make-Legrend / Havells / Seimens/Indoasian

S & F in repair MCB SP, 240 Volts, 32Amps complete all as specified and directed. Make-Legrend / Havells / Seimens/Indoasian

S & F in repair MCB SP, 240 Volts, 63 Amps complete all as specified and directed. Make-Legrend / Havells / Seimens/Indoasian

Supply, fixing and connecting in replacement of Inverter LED light batten with opal diffuser, IP20 4 Hrs Backup ,20/22 W , 4 feet long. Make :- Halonix/Philips/Havells

Supply, fixing and connecting in replacement of Inverter LED Bulb B22 cap 10 watt with Opal diffuser, IP20 4 Hrs backup Make :- Halonix/Philips/Havells

ACR ENTERPRISES

Saini Enterprises

SANJEEV ENTERPRISES

R R Associates

M P TYAGI ENGINEERS AND CONTRACTORS

ramveer Singh

Surjit and Sons

M/S GEETANJALI ENTERPRISES