REPAIR TO FALSE CEILING, OUTDOOR TILING, ROOF SHEETING AND CERTAIN CIVIL WORKS IN CENTRAL AMENITIES / OFFRS RESIDENCE AND WELCOME MAINTENANCE AND CONNECTED ITEMS OF B/R AND E/M UNDER AGE B/R (CENTRAL) UNDER GE (W) COLABA, MUMBAI

Amount

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MD land all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 all as specified and directed.

Providing and injecting chemical emulsion for post constructional Anti-termite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per Sqm of the vertical surface of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding all as specified and directed.

Providing and injecting chemical emulsion for post constructional Anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per running metre including drilling and plugging holes etc in apron all as specified and directed.

M&L Anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors all as specified and directed.

M&L Anti-termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300 mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors all as specified and directed.

M&L Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm center to center and sealing the same all as specified and directed.

Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MoD land all as specified and directed. Note : Height of Bldg Up to fourth floor.

Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MoD land all as specified and directed. Note : Height of Bldg above five Up to Eight floor.

Firstly old loose spelled concrete should be chiseled from roof ceiling with the help of scrapers chisel & hammer after that cleaning of rust from mild steel rod and applying cement sprey 3.00 Kg per sqm by paint brush over cleaned surfaces and M&L for 20-50 mm thick ready mix plaster in Multi layer for ceiling on fair faces of brick wall or concrete surfaces, finished surfaces even and fair Including three coat of white wash all as specified and directed by Engr-in-charge

M&L for 15 mm thick ready mix plaster in single layer with liquid water proofing compound on fair faces of brick wall or concrete surfaces, finished surfaces even and fair, including use of scaffolding, for height of bldgs upto Four stories, complete all as specified and directed.by Engr-in-Charge. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

M&L for 15 mm thick ready mix plaster in single layer with liquid water proofing compound on fair faces of brick wall or concrete surfaces, finished even and fair, including use of scaffolding, for height of bldgs above five to eight stories, complete all as specified and directed.by Engr-in-Charge. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

M&L for 12 mm thick Ready Mix Plaster in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, on other than fair faces of concrete surfaces in wall ( internal surface ) and finished even and smooth without using extra cement, complete all as specified and directed. by Engr-in-Charge. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

M&L for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper over a coat alkali resistant primer coat through authorised applicators of paint manufacturers only of approved shade complete all as specified and directed Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE complete all as specifeid .

M&L for preparing newly plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings from Ground floor upto 04 storeys height of bldgs bldgs complete all as specified and directed. Make: "Apex Ulitima" of Asian Paints "trucare" Primer / "Weather coat all Guard"of Berger Paints / Dulux weather shield Max of Dulux Paints/Excel top Guard of Nerolac paints as approved by GE complete all as specifeid .

M&L for preparing newly plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings from fifth floor upto eight storeys height of bldgs bldgs complete all as specified and directed. Make: "Apex Ulitima" of Asian Paints "trucare" Primer / "Weather coat all Guard"of Berger Paints / Dulux weather shield Max of Dulux Paints/Excel top Guard of Nerolac paints as approved by GE complete all as specifeid .

Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and removing rubbish outside of MoD land all as specified and directed.

M&L for first and premium quality of non skid, ceramic digital “coloured” matt finish joint less tiles of size 300 x 300 x 6-7mm or thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 all as specifed and directed. Make : Johnson tiles / Kajaria / Orient Bell, Sample as approved By GE.

M&L for first and premium quality of Glazed ceramic coloured digital tiles 600 mm x 300 mm or 405 mm x 250 mm x 6 mm to 7 mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match the shades of the tiles laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell, Sample as approved By GE.

M&L for Vitrified tiles dark or light shade /double charge /ultra charged 600 x 600 x 10-12 mm thick (square/ rectangular) polished, size of each tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell, Sample as approved By GE.

M&L for Vitrified tiles dark or light shade /double charge /ultra charged 10-12 mm thick cut to size (square/ rectangular) polished, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles, laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed. Make : Johnson tiles / Kajaria / Euro, Sample as approved By GE.

M&L for glazed ceramic exterior wall tiles 6 to 8 mm thick etc set & jointed in cement and pointed in coloured cement to match the shade of tiles laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified & directed. Make – Johnson (Endura) or equivalent in Kajaria/ Euro tiles, sample as approved by GE

M&L for heavy duty outdoor vitrified tiles dark or light shade 10-12 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.16 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed. Make : Johnson tiles / Kajaria /Euro, approved sample as kept in GE Office.

M&L for 8 mm thick laminate wooden flooring, water resistant, termite resistant, polished flooring is a flating glue less click locked & sealed flooring similar ta a jigsaw puzzle. In this method, the idividule planks are locked on the each other by means of the clicking together but do not attach to the sub floor on which it is being installedall as specified and directed.

S&F in repair Aluminium composite panel sheet 3mm thick PVCF wooden finished of brand name 'Euro bound'/"Alstrong"./ "Viva" fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required silicon & screw as in ceiling/coloumns and in vertical surface all as specified and directed.(approved sample as kept in GE Office)

M&L in repairs for Granite stone best quality (of any type) tiles 15 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed

M&L for molding (Sandwitch moulding) of granite slab edges as directed by Engr-in-charge including polishing etc complete

S&F rolled mild steel sections conforming to Gde Fe-290 (Gde-165-E) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates all as specified and directed.

M&L in repairs multi-rib TM profile high tensile 550 MPA yield strength colour coated galvalume corrugated steel sheet having maximum pitch of 250mm c/c and minimum 30mm crest depth in length as per site requirement. The feed material is to be manufactured out of 0.50mm (TCT). Total coated thickness with 18-20 microns top coat over 5 microns primer and 8-10mm alkyd backer, zinc aluminium alloy of AZ-150. The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%)and silicon (1.5%) with ttoal mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal or fixed with 'L' or 'J' type or cranked hook bolts in roof all as specified and directed by Engr-in-charge.

M&L for preparation of new untreated steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets all as specified and directed.

S&F Solid PVC wall Lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and directed. Make : Rajshree/ Navratan or equivalent, sample as approved by GE

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame all as specified and directed. Make : Rajshree/ Navratan or equivalent, sample as approved by GE

M&L for E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0 / Cement mortar 1:3 all as specified and directed with following:- (a) M&L for Plugging to wall around the rooms & S&F GI powder coated angle of make (Armstrong) of size 25 x 25 mm (b) Supply and fixing 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasteners (c) Supply and fixing GI powder coated tee as in main & cross members at 595 mm centre to centre supported suspenders along with adjustable camp to maintain level. (d) Supply and fixing E-board ceiling tilesof size 595 mm x 595 mm x 4 mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash on old surface of wall all as specified and directed.

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by washing, rubbing down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coats of white wash on old surface of wall all as specified and directed.

M&L for preparation of old plastered or unplastered surface of ceiling including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash on old surface of ceiling all as specified and directed.

M&L for preparing old decorated surface by washing rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of distemper oil emulsion white or tinted complete all as specified and directed. Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE all as specifeid .

M&L for preparing old decorated surface by washing rubbing down and stopping of distempered and painted surfaces of walls and applying two coat of distemper oil emulsion white or tinted complete all as specified and directed. Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE complete all as specifeid .

M&L for preparing old painted wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

All as above item No 40 above but two coats of synthetic enamel paint all as specified and directed.

M&L preparing old painted steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

All as per item No 42 here in before but two coats of synthetic enamel paint.

Taking down existing wall finishes any type by vigorously wire brushing, brooming dusting & finally washing with water to clear the surface absolutely free from any kind of existing finishes & foreign materials making good minor cracks etc in cement mortar 1:3 and applying putty 2 kg per sqm (Birla putty) on the surface with uniform thickness making surface absolutely smooth all as specified and directed.

S&F for applying two coats of distemper oil emulsion or tinted over priming the surface with alkali resistance priming paint all as specified and directed. Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE all as specifeid .

Taking down cement plaster on brick/stone or concrete surfaces including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land all as specified and directed.

S&F in repairs Chromium plated brass angle valve for 15mm bore pipe all as specified and directed.

S&F in repairs, two way angle valve cock chromium plated brass fancy type bore 15mm all as specified and directed.

S&F in repair two way bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore all as specified and directed.

S&F in repair rubber door seal 32 mm wide with aluminium strip of size 19mm wide fixed with machine steel with washer all as specified and directed.

S&F in repair Chromium plated brass shower rose 75 mm dia with arm swivel joints, as per sample kept in GE's office all as specified and directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore, all as specified and directed.

Taking up or down steel tubing 15mm bore pipe and connections including cleaing for refixing or removal from site all as specified and directed.

Taking up or down steel tubing 20mm bore pipe and connections including cleaing for refixing or removal from site all as specified and directed.

S&F 15mm bore, steel water tubing, medium grade, galvanised with all fitting and fixed to walls and ceiling or laid in floors all as specified and directed.

S&F for 20 mm bore, steel water tubing, medium grade, galvanised with all fitting and fixed to walls and ceiling or laid in floors all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity with inlet, ball valve float and handle and 32mm bore flush pipe including bracket all as specified and directed.

S&F in repairs plastic seat cover black/white premium quality of pattern W.C including fixing divice and Chromium plated nuts all as specified and directed.

S&F in repair vitreous china wash down water closet of Pedestal pattern white including making connection to trap and to flushing pipe and making good to floor all as specified and directed.

S&F in repairs flushing jet for pedestal pattern W.C including flexible pipe and brass Chromium plated nuts all as specified and directed.

S&F in repairs PVC connection 15mm dia and 45cm long with 2 Nos PTMT nuts all as specified and directed.

S&F in repairs PVC grating doom 125 mm dia with hole fixed to floor /tarp with cement all as specified and directed.

S&F in repair sheet glass shelf assembly consinsting of 5.5 mm thick sheet glass shelf 12 cm wide with CP bracket guard and railing 60 cm long all as specified and directed.

S&F in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames glazed with putty or fixed with wooden beads/metal pins all as specified and directed.

S&F Sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane all as specified and directed.

S&F figured glass 3 mm thick pin head type and glazing with oil putty in squares n. exc 0.5 sqm in each pane all as specified and directed.

S&F in repair CP brass toilet paper holder, superior quality all as specified and directed.

S&F in repair CP brass, soap dish, superior quality all as specified and directed.

S&F in repairs Stainless steel sink 1.00 mm thick with drainage board for kitchen, with plug, waste pipe, washers including cantilever cast iron bracket, connecting union over all size 915mmx460mm with bowl size 410mmx330mmx160mm all as specified and directed.

S&F in repairs health foucet including PVC pipe 1.50m long with brass nuts for EWC all as specified and directed.

S&F in repairs PVC mirror cabinet, coloured of size 300 x 450 mm fixed with screw and PVC gutty on wall all as specified and directed. Make: Prayag Cat part No : 551 or equvilent as approved.

M&L in repairs for 2nd class hard wood (Sal) plain fillets square rectangular or triangular in section clean swan secured with nails or brads sectional area exc 6 and not exc 13 sq cm all as specified and directed

S&F in repairs 25 mm dia mild steel PVC coating desinger drapry/ curtain rod all as specified and directed.

S&F mild steel PVC coating bracket/ holder for drapry rod fixed with screws all as specified and directed.

M&L for first and premium quality of non skid, joint free GVT “coloured” tiles of size 600 x 600 x 6-7 mm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed or bedding layer of mortar in CM 1:6 all as specifed and directed. Make : Johnson tiles / Kajaria / Orient Bell, Sample as approved By GE.

M&L for first and premium quality non skid, GVT “coloured” tiles of size 600 x 600 x 6-7 mm thick, cut to size in vertical surface, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including 10 mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed Make : Johnson tiles / Kajaria / Orient Bell, Sample as approved By GE.

S&F in repairs vitreous china wash down one piece water closet of Pedestal pattern with flushing cistern white including making connection to trap and to flushing pipe and making good to floor all as specified and directed. Make : Hindware agnese S-220 One piece closet Cat part N0 92563 size 705 x 425 x 785 mm or other approved equivalent make. Sample as approved By GE.

S&F in repairs of 18 mm thick both Side pre laminated MDF Board of any colour, matt surface finish, grade I as per IS 14587, for frame and shutter for kitchen cabinets including all as specified and directed by Engr-in-charge. Make:- ActionTesa/ Greenply and archidply

S&F in repairs vitreous china white wash basin table top size 480 x 365 x 135 mm excluding taps, waste, chain, and plug and porcelain stopper but including brackets & cutting for and pinning in end of brackets or erecting stand all as Specified and directed. Make : Hindware Cat part N0 91041 or Cera/ Parryware, sample as approved by GE

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed

Taking down carefully copper/aluminum submain wiring complete including all fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and applying white/colour wash to match with existing surfaces all as specified and directed

Removing & fixing the sockets/ switch boards back on to walls/tiles all as specified and directed.

Supply & Fix non-metallic PVC casing capping of size 25X12mm all as specified and directed Make : Precision/ Pressfit/ Prestoplast /Asian

M&L for Point wiring (concealed type) with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including rigid non-metallic PVC heavy duty conduit (ISI mark), 19/ 20 mm dia suitable size including cutting chases for conduits, sinking for boxes for concealed conduit wiring with all fittings and accessories including with and fix conecaled 1.2 mm thick pressed steel sunken box along with cover plate and frame, suitable for fixing moduler switch/ socket and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I for one light point controlled by one modular switch, 1 way 6/10 amps, 1 module. Make of Cable : Anchor / Havells / Finolex / Polycab Make of Conduit : Precision/ Prestoplast/ Polycab

All as per serial item No 86 here-in before but for bell point controlled by one switch.

All as per serial item No 86 here-in before but for One ceiling fan by one switch & regulator

All as per serial item No 86 here-in before but for One 3 pin socket point 5 Amps on independent board

All as per serial item No 86 here-in before but for One 3 pin socket point 5 Amps on the same board

All as per srl item no 86 here-in-before but for one socket point 15 Amp with 2.5 sq mm PVC unseathed FRLS wire along with 2.5 sq mm green colour wire as earth contuinity conductor connected to common earth dolly all as specified & directed by engr-in-charge.

S&F moduler switch flush type single pole, one way 6/10 Amp all as specified & directed by engr-in-charge.

S&F moduler switch flush type single pole, one way 16 Amp all as specified & directed by engr-in-charge.

S&F moduler socket 2/3 pin 6 Amp all as specified & directed by engr-in-charge.

S&F moduler socket 6/16 A , 2/3 pin all as specified & directed by engr-in-charge.

S&F moduler stepped type electronic fan regulator 450 watt flush type, two module all as specified & directed by engr-in-charge.

S&F Moduler bell push, 2 modue, 10 Amp all as specified & directed by engr-in-charge.

S&F calling bell ding dong type 230 volts all as specified and directed

S&F for switch piano type in replacement of existing switch board one way 5 Amps all as specified & directed by engr-in-charge.

S&F switch socket type in replacement of existing switch socket combination 6/15 Amps all as specified & directed by engr-in-charge.

S&F switch socket type in replacement of existing switch socket- combination 5 Amps all as specified & directed by engr-in-charge.

S&F regulator in replacement of existing step type regulator all as specified & directed by engr-in-charge.

S&F calling bell push in replacement of existing bell switch type all as specified & directed by engr-in-charge.

S&F ceiling rose surface bakelite 65 x 50 mm two to three terminals all as specified and as directed.

S&F in repairs 20 watt LED 4 feet long, with extruded aluminium housing and robust construction LED lighting fixture with high lumen output, environmental friendly, energy efficient ready to use pack. fixed on PVC square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed. Make : Wipro, Model No Wipro Garnet 20W Aluminium LED batten light 6500K, D552065 / Havells, Model No Higher Wattage 22W LED 6500K / Philips, Model No BS150W LED 20S-6500 PSE OD GR

S&F in repairs surface mounted 9/10 watts LED tube light fitting, 2 feet long light fitting with square batten LED lighting fixture with high lumen output, environmental friendly, energy efficient ready to use pack. fixed on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing all as specified and directed Make : Wipro, Model No Wipro Garnet 10W LED batten light 6500K, D571065 / Havells, Model No Higher Wattage 10W LED 6500K / Philips, Model No BS150W LED 10S-6500 PSE OD GR

S&F in repairs opal Globe glass Decorative wall light fixture will nickel finish, suitable for & including E-27 LED lamp 7 Watts LED with high lumen output, environmental friendly, energy efficient ready to use pack. fixed on PVC square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed. Make : Jaquar catpat No: JNL-NKL-WLBPGG001E27 or equivalent model in Philips,

Supply and fix in repairs cylindrical Opal Glass diffuser mirror light fitting suitable for & including E-14 LED lamp 4 Watts LED with high lumen output, environmental friendly, energy efficient ready to use pack. fixed on PVC square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed. Make : Jaquar catpat No: JNL-BRG-WLCYLNDSIE14 or equivalent model in Philips,

S&F in repairs 18 watt LED Surface mounted light fitting of 6500K with high lumen output, environmental friendly, energy efficient ready to use pack. fixed on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable to light fitting (connector block of lamp fitting) and one for earthing all as specified and directed. Make : Wipro Garnet catpat No: D651865 or equivalent model in Havells, Philips, OSRAM.

S&F in repairs 06 watt LED wall light 2700K with high lumen output, environmental friendly, IP54 energy efficient ready to use pack. fixed on PVC square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable to light fitting (connector block of lamp fitting) and one for earthing all as specified and directed. Make : Wipro Garnet catpat No: DW20627 or equivalent model in Havells, Philips, OSRAM.

Supply and laying in repairs sub main wiring (concealed type) for AC point/ DB to DB with two run of 4 sqmm stranded copper conductor wire (FRLSH) with one run of 4 sqmm stranded copper conductor as earth continuty conductor connected to common earth dolly including adequate size and including rigid non-metallic PVC heavy duty conduit (ISI mark), 19/ 20 mm dia suitable size including cutting chases for conduits all as specified. Note: Mode of measurement two runs of 4 sqmm cable and one run of 4 sqmm cable shall be measured as one length. Make of Cable : Anchor / Havells / Polycab

S&F modular type AC Box, 4 Module with Socket and 25 Amp SP mini MCB in plastic box enclosure along with cover plate and top all as specified and directed. Make : Anchor Model No : 98498 or equivalent model in Havells/ Legrand.

S&F in repairs down rod 1 mtr long, made out of 15mm GI pipe, heavy duty, ISI mark having provision of fixing U clamp with and including drilling in pipe at top and bottom for fixing Fan motor assembly, painting with superior quality white colour synthetic enamel paint all as specified & directed by engr-in-charge. Make of GI Pipe : Tata / Jinda

S&F down rod 2 mtr long, made out of 15mm GI pipe, heavy duty, ISI mark having provision of fixing U clamp with and including drilling in pipe at top and bottom for fixing Fan motor assembly, painting the with superior quality white colour synthetic enamel paint. Make of GI Pipe : Tata / Jinda

Fixing only exhaust fan on walls/windows by providing wooden frame and other necessary tools to fix the exhaust fan all as specified & directed by engr-in-charge.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60cmx6.3 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level, connected to 4 mm dia GI wire as earthling lead by means blots and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber, MS funnel, wire gauge. CI cover with frame, 15 MM dia GI pipe light grade for protection of wire etc including necessary excavation in any type of strata, returning, filling removal of soil outside MD land, filling of charcoal and salt all as shown in electrical plate No. 3 of MES Sch Part I, connected to Earthing test point all as specified and directed on testing on completion.

D.S. Construction

Ganesh Enterprises

N F ENTERPRISES

Bidder Name

D.S. Construction

Ganesh Enterprises

SHIV ENTERPRISE

N F ENTERPRISES