PROVISION OF SENTRY GUARD ROOM WITH BATHROOM AND TOILET BLOCK FOR C GATE SECURITY GUARD AT SUNJUWAN UNDER GE JAMMU

Amount

B/R Portion: - Surface dressing not exceeding 15 cm deep in hard / dense soil complete all as specified and directed.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, cables etc not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft / disintegrated soil complete all as specified and directed.

Returning and filling well compacted and ramming to a true surfaces complete all as specified and directed.

Removing of excavated material to distance not exceeding 50 metre from starting point complete all as specified and directed.

Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filing and mass concrete complete all as specified and directed.

Formwork to sides of rough finished surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter fair finished surfaces of concrete etc complete all as specified and directed.

Material and labour for RCC M-25 design mix with using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Formwork to sides of rough finished flat surfaces of concrete pillars, posts, struts, piers, columns and stanchions fair finished surfaces of concrete in square, rectangular etc complete all as specified and directed.

Material and labour for RCC M-25 design mix with using 20mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.

Formwork to sides and soffits of rough finish surfaces of concrete floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams fair finished surfaces of concrete etc complete all as specified and directed.

Material and labour for RCC M-30 design mix with using 20mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (Horizontal or Sloping) fair finished surfaces complete all as specified and directed.

Material and labour for RCC M-25 design mix with using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour TMT bars 10 mm and above, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement complete all as specified and directed.

Material and labour 5 mm dia and over upto 10 mm dia, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks in cement mortar (1:4) straight or curved on plan exceeding 6m mean radius etc complete all as specified and directed.

Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.

Material and labour 15 mm thick cement plaster in CM (1:4) finished even and smooth without using extra cement on walls complete all as specified and directed.

Material and labour for preparation of new plastered surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

Material and labour for rendering 10mm thick on fair faces of brick work or concrete internal surfaces in CM (1:6) complete all as specified and directed.

Material and labour for preparation of new surfaces of wall and applying two coats of Oil bound distemper white or tinted including 1 mm thick wall care putty complete all as specified and directed.

Material and labour including preparation of surface and applying three coats of white wash on wall including preparation of new plastered surfaces complete all as specified and directed.

Material and labour for rendering 5mm thick ceiling plaster in CM (1:3) complete all as specified and directed.

Material and labour including preparation and applying two coats of white wash on ceiling including preparation of old plastered surfaces complete all as specified and directed.

Material and labour for moorum / red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Material and labour for PCC sub base (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed.

Material and labour for non skid / mat finish ceramic colour joint free tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles, (Premier quality), of size 300mm x 450mm x 7 to 8 mm thick joint free on vertical surfaces such as skirting, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces including 10mm thick rendering in CM (1:4) all as specified and directed. Note: - Design, shape and pattern of fixing of tiles complete all as specified and directed by Engineer-in-Charge.

Supply and fixing box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick mild steel sheet tube factory made with double side shutters wire gauged shutter and glass glazed shutter (wire cloth and glass panes will be measured and paid separately) with side hung shutters with mild steel handles and mild steel peg stay dovetailed or welded including 02 No's mild steel tower bolts 150 mm long for each leaf and 08 mm square bar grill / guard bars at spacing as shown on drawing welded mild steel flat iron frame work, including other fittings, hinges, mild steel handles, tarred hold fasts, PCC blocks for hold fasts etc all as shown on drawing No CEPZ/TD-354/09 sheet 1/3 to 3/3 including one coat of red oxide zinc primer complete all as specified and directed.

Material and labour for granite 15 to 18 mm thick (pure black) (table rubbed and polished) as in steps, jambs, pillars, window cills cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed in CM (1:4) edges of slab to be rounded from all sides. (including cutting and polishing) complete all as specified and directed.

Supply and fixing pressed steel frames (factory made) made of size 1.25mm thick mild steel for door with one or more rebates including lugs, hinges, hold fast, lock strike plate etc complete of size 125 x 60mm including one shop coat of red oxide primer, PCC (1:3:6) as in back fill to chowkhats complete all as specified and directed.

Supply and fixing 35mm thick second class hard wood plain framed panelled factory made shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veeneering on both faces fitted to chowkhats complete all as specified and directed.

Supply and fixing 35mm thick second class hardwood glazed and skeleton shutters, open, rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part- I, section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.

Supply and fixing galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with rails / wooden beading / steel staple complete all as specified and directed.

Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty in square pane complete all as specified and directed.

Description all as per Ser item No 35.00 here-in-before but figured, pin head type and glazing with oil putty or wooden beads, in squares each pane complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint on new or previously untreated wood and wood based surface over a coat of pink primer including preparation complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

Supply and fixing PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2004 complete all as specified and directed.

Supply and fixing 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

Supply and fixing extruded aluminium alloy handles 150mm long 'D' type anodised complete ISI marked complete all as specified and directed.

Supply and fixing Aluminium, anodised, barrel tower bolts of extruded section and fixed 200 mm long complete all as specified and directed.

Supply and fixing 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing with nut and bolt of ISI marked complete all as specified and directed.

Supply and fixing mild steel helical / ordinanry rat tail rod pattern door spring 300 mm including roller and roller plate complete fixed with welding complete all as specified and directed. (ISI marked).

Supply and fixing Vitreous china, white, Squatting pan, 'Orrisa' pattern size 580 x 440mm with integral foot rests water closet), front or back inlet complete, connection to drain pipe and to flushing pipe, anti-syphonage pipe etc complete including making good to floor to match with the exisitng complete all as specified and directed.

Supply and fixing in repair vitreous china urinals, half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with grating and union for discharge pipe, including PVC waste pipe 32mm of suitable length, PTMT waste coupling 32mm dia suitable for urinals, PVC connection 15 x 450mm long, CP urinal spreader, 15 mm angle valve fancy type chromium plated complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC (SWR) 'P' trap 110 / 110 mm bore complete all as specified and directed.

Supply and fixing 10 litre capacity low level flushing cistern, with inlet float valve, moulded from virgin poly propylene single flush including provision of 32 mm dia PVC flush pipe and making connections, ISI marked or equivalent complete all as specified and directed.

Supply and fixing PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore complete all as specified and directed.

Supply and fixing pillar tap 15 mm dia cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.

Supply and fixing vitreous china wash hand basin white, flat back of size 450mm x 300mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling including fixing of tap, waste fitting 32mm dia PVC waste pipe etc complete all as specified and directed.

Supply and fixing bib tap cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15 mm bore complete all as specified and directed.

Supply and fixing stop valve / angle valve cast copper chromium plated screwed down, high pressure with capstan head suitable for 15 mm bore, screwed both ends for iron pipe complete all as specified and directed.

Supply and fixing brass chromium plated shower rose 125 mm size swivel type with connecting rod 15 mm bore complete all as specified and directed.

Supply and fixing stop valve cast copper chromium plated concealed type screwed down, high pressure with capstan head suitable for 15 mm bore complete all as specified and directed.

Supply and fixing stainless steel gratings of outer frame dia 150 mm openable type including all necessary fittings such as hinges including embedding in tiles with white cement complete all as specified and directed.

Supply and fixing PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps complete all as specified and directed.

Supply and fixing PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps complete all as specified and directed.

Supply and fixing PVC SWR bends of 110 mm bore complete all as specified and directed.

Supply and fixing PVC SWR bends of 75 mm bore complete all as specified and directed.

Supply and fixing PVC (SWR) junction double equal or unequal provided with access door of 110 mm dia complete all as specified and directed.

Supply and fixing PVC (SWR) junction single (single T) equal or unequal provided with access door of 75 mm dia complete all as specified and directed.

Supply and fixing PVC (SWR) floor trap plain including jointing with solvent cement 75 mm dia complete all as specified and directed.

Supply and fixing PVC (SWR) reducer of 110 mm dia complete all as specified and directed.

Supply and fixing PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

Supply and fixing PVC (SWR) water closet connector with lip ring 110 mm complete all as specified and directed.

Supply and fixing towel tail 20mm dia 'D' type 60cm long chromium plated brass screws and wooden / plastic cleats complete all as specified and directed.

Supply and fixing soap dish fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed.

Supplying, fixing, jointing and testing galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors for 15mm dia bore complete all as specified and directed.

Supplying, fixing, jointing and testing galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors for 25mm dia bore complete all as specified and directed.

Supply and fixing rotational moulded polyethylene water storage tanks of capacity 1000 litres, (cylindrical vertical with closed top) hoisted and fixed in position including necessary check nuts and washer complete all as specified and directed.

Supply and fixing mild steel bed side lockers of size 760 x 600 x 1000mm embedded lockers foot in floor including partitions and racks, two coats of synthetic enamel paint over a coat of red oxide primer using mechanical spray complete all as specified and directed by Engineer-in-Charge.

Supply and fixing float PVC float valve 20mm dia high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

Material and labour for cement concrete (1:2:4) type C-1 (using 20mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Material and labour for rendering 20 mm thick in CM (1:4) on concrete surfaces (on roof slab) finished even and smooth without using extra cement, mixing liquid water proofing compound complete all as specified and directed. Note: - Liquid water proofing compound shall be measured and paid separately.

Cleaning and removing loose / dirt materials from the roof surfaces and applying bitumen primer @ 0.30 litres / Sqm, providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.5 Kg / Sqm reinforced with non woven polyester mat weighing not less than 160 gm / Sqm, having softening point not less than 800 N /Sq cm, tearing strength of 180 N, with minimum of 10 cm side laps and 15cm end laps, laying by application of torch and applying two coats of aluminium paint complete all as specified and as directed.

Supply only liquid integral water proofing compound complete all as specified and as directed.

Material and labour for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection, concrete shall be laid in alternate bays not exceeding 3m in length, finished fair and even complete all as specified and directed.

Material and labour for 15mm thick screed bed or bedding layer for laying floor finishes in CM (1:6) complete all as specified and directed.

Material and labour for chequered cement concrete tiles 20cm x 20cm x 25mm / 30cm x 30cm x 25mm thick, pre-polished set, jointed and pointed in neat cement slurry with grey / colour cement and pigment in floors complete all as specified and directed.

Material and labour for stone kerb of roughly squared stones of size 20 cm X 10 cm X 30 cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6 mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar (1:6) and struck flush complete all as specified and directed.

Material and labour for providing precast cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in cover slab of manholes, septic tank, soakage well etc set in cement mortar (1:4) with plain fair faces including chamfered weathering, throating etc including necessary use and waste of form work complete all as specified and directed.

Material and labour for septic tank 25 users single chamber (brick construction) with top of slab at ground level including necessary excavation and earth work in any type of soil and disposed of surplus soil to a distance not exceeding 50 m vent pipe and fixing of manholes cover with angle iron welded frame complete all as specified and shown on drawings No CEPZ/C-TD/013/13 sheet No 1/5 to 5/5 dated 11 Sep 2013 complete all as specified and directed.

Material and labour for soakage well 2.40 metre dia and 3.00 metre deep below inlet pipe level (depth from inlet pipe to ground level 45 cm) including excavation and earth work in any type of soil filled with brick bats, RCC slab with RCC manhole cover fixed in angle iron frame, SWG single junction inlet, filling around slab in slopes and disposal of surplus soil to a distance not exceeding 50m complete all as specified and shown in drawings No CEPZ/TD/1202/03 dated 09 Oct 2003 revised on 21 Oct 2003 sheet No 1/2 and CEPZ/TD/12002/03 dated 09 Oct 2003 sheet 2/2 complete all as specified and directed.

Supply and fixing of 200 mm dia reinforced concrete pipes, class NP-2 with one collar per length of pipe complete all as specified and directed.

Cutting / screwing existing CI / GI tubing for alteration or addition of 25 mm dia pipe in position without taking down complete all as specified and directed.

Material and labour for 20mm dia PVC coated aluminium drapery rod with brackets and funnel complete all as specified and directed by Engineer-in-Charge.

Supply and fix gun metal globe or gate valves (ISI marked), with iron wheel head, screwed both ends for iron pipe or for unions for 25mm dia bore pipe complete all as specified and directed.

E/M Portion: - Material and labour for point wiring with multistranded FRLS PVC insulated, unsheathed copper conductor cable single core of 1.5 Sqmm drawn into and including PVC concealed conduit 'ISI marked' of 20mm dia medium grade as required, fixed in concealed surface of wall / ceiling including cutting chases as required, terminated in pressed steel sunken box having wall thickness as directed suitable for housing of switches, socket, regulator etc, covered with 3mm thick bakellite 'hylam' laminated sheet cover complete with all accessories including single core FRLS PVC insulated unsheathed solid copper conductor cable of 1.5 Sqmm for earth continuity conductor (green colour) and connected to earth dolly for one light / fan / bell point controlled by one way switch using proper colour coding complete all as specified and directed.

Description all as per Ser item No 91.00 here-in-before but for one 3 pin socket outlet 5/6 Amp same board complete all as specified and directed.

Description all as per Ser item No 91.00 here-in-before but for one 3 pin socket outlet 5/6 Amp independent complete all as specified and directed.

Description all as per Ser item No 91.00 here-in-before but for one15 Amp 3 pin switch socket outlet, independent with 4 Sqmm single core multi-stranded copper conductor cable (FRLS) alongwith 2.5 Sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire complete all as specified and directed.

Supply and fix switch piano flush type single pole, one way 5/6 Amp complete all as specified and directed.

Supply and fix switch socket outlet combination universal type, 2 in 1, 2 and 3 pin 5/6 Amp, piano flush type, 240 volts complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing socket outlet, 5 pin type, 5 Amp, flush type, 240 Volt complete all as specified and directed.

Supply and fixing of switch socket outlet combination universal type, 2 in 1, 3 pin 5 and 15 Amp, piano flush type, 240 volts complete all as specified and directed by Engineer-in-Charge.

Supply and fixing ceiling rose surface bakellite three terminals 240 volts complete all as specified and directed.

Supply and fixing lamp holder PVC case body of Bakellite with back plate suitable for batten fittings complete all as specified and directed.

Supply and fixing inverter LED lamp, 6500K, 900lm in white colour of 9 watt base capacity B-22 with polycarbonate diffuser and aluminium heat sink complete all as specified and directed.

Supply and fixing electronic fan regulator stepped type, two module with five step 240 volts, 100 watt suitable for 1200 / 1400 mm sweep AC ceiling fan complete all as specified and directed by Engineer-in-Charge.

Material and labour for single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 10 Amps complete all as specified and directed.

Supply and fixing tube light fitting integrated type suitable for LED 20 W indoor decorative aluminium extruded T5 LED batten complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed. Make: - Philips Cat Part No : BN021CLED20SPSUCWGRS2 / C&S Cat Part No : LTTB4F20WLED/W / Halonix Cat Part No : HLB-03-20-CW-AL / Havells Cat Part No : LUMILINEPLUSBS20WLED865SPCSS / Crompton CAT part no : LDL-36-CDL / Surya Cat part No : SLE BT 20M.

Supply and fixing exhaust fan metallic body, 300mm (12") sweep, single phase, 230 volts 50 Hz AC, 1400 RPM, energy saving, heavy duty totally enclosed, heavy duty motor with die-cast aluminiun rotor mounted on two ball bearings complete with louvers and shutters including cutting hole for fixing exhaust fan to wall and making good the disturbed surfaces (including making holes in wall, plastering, necessary brick work and distempering) to match with the existing specification, connecting electrically using 3 core 0.75 Sqmm PVC insulated flexible copper conductor cable over all sheathed complete all as specified and directed. Make: - Khaitan / Havells / Bajaj / Crompton

Supply and fixing sheet metal enclosure IP-43 double door for distribution boards (where MCB's are required) SPN 240 V, for 12 ways complete all as specified and directed.

Supply and fixing MCB SP 06 to 32 Amp, 240 volts complete all as specified and directed.

Supply and fixing MCB DP 63 Amp, 240 volts 50 Hz AC supply complete all as specified and directed.

Supply, install and testing water heater storage type (Geyser) single phase 230 V, 50 Hz, 5 star energy saving high density PUF insulation tank made of heavy duty magnesium anode rod with steel core to protect enamelled tank from rust and corrosion, vertical installation type, 50 Litre capacity, 2000 Watt rated power, incoloy 800 glass coated heating element, tank coating of ferroglass powder, tank made of ultra thick super cold rolled steel plates, rated pressure 0.8 MPa, IPX4 protection consisting of safety valves, thermal cut off, thermostat including connecting up fixed to walls by drilling of holes, grouting of bolts of suitable size with nuts etc and making good disturbed surface complete all as specified and directed.

Material and labour for LT underground cable XLPE insulated, heavy duty armoured sheathed 1100 volts grade 16 Sqmm, 2 core, with aluminium conductor, ISI marked as per IS : 7098 (Part-1) complete all as specified and directed.

Material and labour for sand cushioning for protection of underground cable consolidated and compacted with clean dry sand all as specified and as directed. Note: - Compacted thickness shall only be measured and paid.

Material and labour for well burnt bricks, sub class 'B' bricks, best quality locally available laid flat, dry in trenches for cable protection complete all as specified and as directed.

Material and labour for earthing complete with galvanized mild steel earth plate electrode size 600 x 600 x 6mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (below ground level) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC (1:2:4) type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 part-I connected to test point complete all as specified and directed and testing on completion.

Supply and fixing integral LED street light luminaire 60 watt LED 230 volts made of pressure die cast aluminium housing with high power LED’s lens and toughened glass IP-66 including galvanised iron 40 mm mounting bracket fixed on wall with necessary clamps, nuts and bolts and making connection with PVC copper flexible cable 1.5 Sqmm complete all as specified and as directed.

Supply, install, testing and commissioning of 1200mm sweep 230 volts AC ceiling fan, star BEE Five star rated with brushless direct current motor (BLDC) confirming to IS 374:2019, 3 blade along with copper wound stator, with minimum air delivery 210 cubic metre per minute, aluminium blades, capacitor, down rod, canopy etc as required including making connection with three core 1.5 Sqmm flexible copper cable upto ceiling rose complete all as specified and directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

M/S PRITHIVI RAJ AND SONS

M/S VED PAUL MAHAJAN

M/S TRIKUTA BUILDERS

Bidder Name

M/S VED PAUL MAHAJAN

M/S TRIKUTA BUILDERS

M/S PRITHIVI RAJ AND SONS

KIRAN AGENCIES