SPECIAL REPAIRS/ REPLACEMENT OF JUNCTION BOX, LT PANELS AND UNSV SOCKETS AT INS KARDIP, KAMORTA UNDER GE CAMPBELL BAY

Supply & fixing in replacement , install testing and commissioning weather and vermin proof out door type L.T. Panel board (MCBM cabin) factory fabricated cubicle/kiosk type totally enclosed IP 54 made out of 3.15 mm thick CRCA sheet metal enclosure of suitable size, with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly spray painted grey hammer tone with one coat of red oxide primer and two coats of synthetic enamel paint of gray or any other approved colour, including connecting with L.T. armoured incoming and outgoing cables and including required sizes of cable lugs of aluminum complete all as specified and directed and consisting of following :-

(a) Aluminium bus bar 200 Amps for 3 phase & neutral (b) MCCB 4 pole 100 Amp 16 KA 415 V - 01 No. (As Incomer) (c) MCCB 4 pole 63 Amp 16 KA 415 V- 04 Nos. (d) Digital Volt meter (0-500 V) with selector switch (e) Digital Ammeter CT operated 0 to 500 Amp with phase selector switch (f) Indicator lamp (RYB) - 3 Nos (g) Digital Timer Switch 40Amps (h) Blank Space for Mounting of MCCB - 01 No.

Supply & fixing in replacement , install testing and commissioning weather and vermin proof out door type L.T. Panel board (Gate) factory fabricated cubicle/kiosk type totally enclosed IP 54 made out of 3.15 mm thick CRCA sheet metal enclosure of suitable size, with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly spray painted grey hammer tone with one coat of red oxide primer and two coats of synthetic enamel paint of gray or any other approved colour, including connecting with L.T. armoured incoming and outgoing cables and including required sizes of cable lugs of aluminum complete all as specified and directed and consisting of following :

(a) Aluminium bus bar 400 Amps for 3 phase & neutral (b) MCCB 4 pole 200 Amp 36 KA 415 V - 01 No. (As Incomer) (c) MCCB 4 pole 100 Amp 16 KA 415 V - 02 Nos (d) MCCB 4 pole 63 Amp 16 KA 415 V- 02 Nos. (e) Digital Volt meter (0-500 V) with selector switch (f) Digital Ammeter CT operated 0 to 500 Amp with phase selector switch (g) Indicator lamp (RYB) - 3 Nos (h) Digital Timer Switch 40Amps (j) Blank Space for Mounting of MCCB - 01 No.

Supply & fixing in replacement , install testing and commissioning weather and vermin proof out door type L.T. Panel board (Japan well, MLR) factory fabricated cubicle/kiosk type totally enclosed IP 54 made out of 3.15 mm thick CRCA sheet metal enclosure of suitable size, with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly spray painted grey hammer tone with one coat of red oxide primer and two coats of synthetic enamel paint of gray or any other approved colour, including connecting with L.T. armoured incoming and outgoing cables and including required sizes of cable lugs of aluminum complete all as specified and directed and consisting of following :-

(a) Aluminium bus bar 200 Amps for 3 phase & neutral (b) MCCB 4 pole 100 Amp 16 KA 415 V - 01 No. (As Incomer) (c) MCCB 4 pole 63 Amp 16 KA 415 V- 03 Nos. (d) MCB TPN 40 Amps 10 KA 415 V - 04 No. (e) MCB TPN 40 Amps 10 KA 415 V - 04 No. (f) Digital Volt meter (0-500 V) with selector switch (g) Digital Ammeter CT operated 0 to 500 Amp with phase selector switch (h) Indicator lamp (RYB) - 3 Nos (j) Digital Timer Switch 40Amps (k) Blank Space for Mounting of MCCB - 01 No.

Supply & fixing in replacement , install testing and commissioning weather and vermin proof out door type L.T. Panel board (Trinket) factory fabricated cubicle/kiosk type totally enclosed IP 54 made out of 3.15 mm thick CRCA sheet metal enclosure of suitable size, with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly spray painted grey hammer tone with one coat of red oxide primer and two coats of synthetic enamel paint of gray or any other approved colour, including connecting with L.T. armoured incoming and outgoing cables and including required sizes of cable lugs of aluminum complete all as specified and directed and consisting of following :-

(a) Aluminium bus bar 200 Amps for 3 phase & neutral (b) MCCB 4 pole 100 Amp 16 KA 415 V - 01 No. (As Incomer) (c) MCCB 4 pole 63 Amp 16 KA 415 V- 06 Nos. (d) MCB SPN 40 Amps 10 KA 415 V - 06 No. (e) Digital Volt meter (0-500 V) with selector switch (f) Digital Ammeter CT operated 0 to 500 Amp with phase selector switch g) Indicator lamp (RYB) - 3 Nos (h) Digital Timer Switch 40Amps (j) Blank Space for Mounting of MCCB - 01 No.

Supply, install testing and commissioning weather and vermin proof Outdoor type L.T. Panel board (Ward Room) factory fabricated cubicle/kiosk type totally enclosed IP 54 made out of 3.15 mm thick CRCA sheet metal enclosure of suitable size, with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly spray painted grey hammer tone with one coat of red oxide primer and two coats of synthetic enamel paint of gray or any other approved colour, including connecting with L.T. armoured incoming and outgoing cables and including required sizes of cable lugs of aluminum complete all as specified and directed and consisting of following :-

(a) Aluminium bus bar 315 Amps for 3 phase & neutral (b) MCCB 4 Pole 125 Amp 25 KA 415V - 1 Nos (01 No. as Incoming) (c) MCCB 4 pole 63 Amp 16 KA 415 V - 4 Nos as (01 No. as Outgoing spare) (d) Digital Timer Switch 3 Pole 40 Amps - 01 No. (e) Digital Volt meter (0-500 V) with selector switch (f) Digital Ammeter CT operated 0 to 500 Amp with phase selector switch (g) Indicator lamp (RYB) - 3 Nos (h) Blank Space for Mounting of MCCB - 01 No.