REPAIR TO FENCING, DRAINS AND PATH IN RESTRICTED AND UNRESTRICTED AREAS OF AGE B/R-II PANAGARH UNDER GE PANAGARH

Amount

M&L for fly ash brick straight or curved on plan exc 6 mtr mean redious built in cement mortar (1:6) including demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed.

M&L for brick work using old size bricks (EXCEPT BRICKS) straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar (1:6 ) including dismantling of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed.

Use and waste formwork to sides of concrete foundations footings, bases of columns etc rough finished surfaces of concrete(flat) complete all as specified and directed.

Use and waste of formwork to sides of rough finished surfaces of concrete square or rectingular pillars posts struts piers columns complete all as specified and directed.

M&L for RCC (nominal mix) type B-1 1:2:4 (20 mm graded aggregate) in foundations footings bases for columns including demolition of RCC in any position complete all as specified and directed.

M&L for RCC (nominal mix) type B-1 1:2:4 (20 mm graded aggregate) in columns pillars piers posts and struts etc including demolition of RCC complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, including demoliton of RCC complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work n. exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and directed.

Dismantling of structural steel work including door, gate but excluding framed truss etc complete all as specified and directed.

S&F mild steel framed workes in door gate of angle or other section gusset plate rail brackets etc complete drilled for fixing steel sheeting or other convering section of Fe 410-0 or 310-o. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and also fastening complete all as specified and directed.

All as per item No 10.00 mentioned here-in-above but fixing only complete all as specified and directed.

S&F mild steel pintel hinges large hasp and staple holdfast etc complete all as specified and directed.

M&L for rendering 15 mm thick in (1:6) on fair faces of brick or concrete surfaces work finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying three coats of white wash complete all as specified and directed.

Dismantling post or strut (wood, steel or RCC) including taking out embeded portion in concrete, and making good disturbed ground complete all as specified and directed.

All as per item No 15.00 mentioned here-in-above but embeded in natural ground complete all as specified and directed.

Excavation in post hole each not exc 0.5 cum getting out returning, filling and ramming earth or broken rubble mixed into earth around in layers n exc 25 cm watering and removing surplus soil to a distance n. exc 50 m and making surfaces good in soft/loose soil complete all as specified and directed.

M&L for providing reinforced cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area in exc 100 sq. cm but n exc 250Sqcm, with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and directed.

M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 12.00 mentioned here-in-before but but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

S&F in repair galvanised two strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any standard rail straining bolt, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pin etc complete all as specified and directed.

Dismantling fencing wire mesh any type including line wire complete all as apecified and directed.

Supply only mild steel galvanised chain link fencing any size and type complete as all specified and directed. Note: Weight of chain link fencing shall be asertain through Board of Officers.

Fixing only chain link fencing ,including line wire, welding or nuts & bolts of any size of mesh complete all as apecified and directed.

S & F mild steel angle and flat iron section fixed independently with out connecting plate of Fe-410-W (Gde-E-250) quality -B complete all as specified and directed.

S&F mild steel screw bolt (machine made) with square heads at one end and screwed the other, 10 mm dia length of bolt exc. 5 cm but n.exc 10 cm long complete all as specified and directed.

All as per item No 26.00 mentioned here-in-above but length of bolt exc 10 cm and n. exc 15 cm long complete all as specified and directed .

M&L for preparation of new steel surfaces and apply two coats of synthetic enamel paint over a coat of red oxide primer over 10 cm width or girth complete all as specified and directed.

M&L for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M & L for preparation of steel surface of any description, n exc 10cm in width or girth when unconnected with other painting or when painted in a different tint, using synthetic enamel paint with primer complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors and paving n. exc 15 cm thickness below or above ground level complete all as apecified and directed.

M&L for hardcore of gauge n exc. 63mm, (broken stone/ boulders)deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as apecified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5mm graded aggregate) as in coping including necessary formwork complete all as apecified and directed.

M&L for 15mm thick Rendering in CM (1:6) on brick/concrete surfaces and finish the surface even and smooth with using extra cement complete all as apecified and directed.

M & L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in surface channels and drain complete all as specified and directed.

M & L for providing RCC precast cement concrete type B-1 (1:2:4) (20mm graded stone aggregate) as in cover slab for man hole and similar article with plain face set in cement mortar (1:4) complete all as specified and directed.

M&L for chequered cement concrete tiles 20cm x 20cm x25mm thick with grey cement & pigment with 20 mm thick screed bed set in cement mortar (1:6) ccomplete all as specified and directed.

M & L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigments complete all as specified and directed.

Deduct the total amount of credit against Sch 'A' Rs (-) 2,27,400.00/- (*) This amount is fixed and shall be deducted from the quoted amount of the bidder to arrive at contract sum.

M/S DEBNATH MONDAL

UNIQUE ENTERPRISE

M/s Baba kshatrapal Labour Contract And Construction Co-Operative Society Ltd

UNITED BUILDERS

BABY ENGINEERING ELECTRICAL MECHANICAL STORES

M/S Dey Construction

MS FORWARD BUILDERS E 32/10/KKD

M/S MODERN CONSTRUCTION

M/S SWAPAN KUMAR MONDAL

rahul enterprise

SARASWATI ENTERPRISE (INDEX NO CEEC D-81)