REPAIRS AND MAITENANCE OF LEAKAGE/ SEEPAGE IN MD OOFRS ACCN AT TARAPORE OFFRS ENCLAVE RANGPURI UNDER AGE B/R-II (S) OF GE SOUTH DELHI CANTT-10

Amount

Taking down cement or cement lime plaster, any description, on brick or stone walls/ concrete surface, etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engineer-in-charge.

M&L for 15mm thick rendering in CM 1:4 of brick/ concrete surface finished fair even and smooth without using extra cement with water proofing compound by weight as per manufacturers instruction complete all as specified and directed by Engineer-in-charge. Note: Liquid water proofing compound shall be measured and paid seperately.

M&L for 15mm thick rendering in CM 1:6 of brick/ concrete surface finished fair even and smooth wihout using extra cement and then applying a coat of liquid water proofing compound as per manufacturers instruction over newly plastered surface, complete all as specified and directed by Engineer-in-charge. Note: Liquid water proofing compound shall be measured and paid seperately.

M&L for 10mm thick rendering in CM 1:3 on ceiling and finished fair even and smooth without using extra cement, complete all as specified and directed by Engineer-in-charge.

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint complete all as specified and directed by Engineer-in-charge.

M&L for preparing of newly plastered or unplastered surfaces of ceiling and applying three coats of White wash, complete all as specified and directed by Engineer-in-charge.

M&L for Preparing newly plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over including one coat of birla white wall care putty on whole surface including grinding with sand paper and leveling of surface complete all as specified and directed by Engineer-in-charge.

Supply only liquid water Proofing Compound, complete all as specified and directed by Engineer-in-charge.

Disma+B43ntling floors, hearth or wall tiling including cement morter bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engineer-in-charge.

M&L for Virified Ceramic tiles, light shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. laid over 15mm thick cement mortar screed bed (1:6) , set and jointed in neat cement slurry @ 3.00 kg per Sqm and pointed in white or coloured cement to match the shade of tile, complete all as specified and directed by Engineer-in-charge.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc laid on 15mm thick cement mortar screed bed (1:6), set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tiles, complete all as specified and directed by Engineer-in-charge.

M&L for Glazed Ceramic coloured tiles in vertical surface 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10mm thick backing coat of cement mortar (1:4), complete all as specified and directed by Engineer-in-charge.

M&L for Glazed ceramic coloured tiles of 300x200x7mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over 10mm thick cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed by Engineer-in-charge.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing’s or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed by Engineer-in-charge.

Taking up or down 15mm bore steel tubing and connections including cleaning for re-fixing or removal to store , complete all as specified and directed by Engineer-in-charge.

Taking up or down 20mm bore steel tubing and connections including cleaning for re-fixing or removal to store , complete all as specified and directed by Engineer-in-charge.

S&F 15mm bore GI tubes, medium grade galvanised, with all fittings (such as bends, tee, elbows, short pieces, connector, cap, plug and union etc) and fixed complete to walls and ceilings or laid floors or concealed, complete all as specified and directed by Engineer-in-charge.

S&F 20mm bore GI tubes, medium grade galvanised, with all fittings (such as bends, tee, elbows, short pieces, connector, cap, plug and union etc) and fixed complete to walls and ceilings or laid floors or concealed, complete all as specified and directed by Engineer-in-charge.

S&F in repairs of plastic WC seat cover white/ off white closed pattern with flat bottom end cover and mild steel CP hinging device, complete all as specified and directed by Engineer-in-charge.

S&F in repair 15 mm bore brass CP mixture for mixing hot and cold water for central hole wash hand basin screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repair 15 mm bore brass CP mixture for mixing hot and cold water for sink screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.

S&F Vitrous china wash hand basin white Ovel type over counter of size 550x 420mm, including necessary waste pipe and coupling, and fixed in position complete all as specified and directed by Engineer-in-charge.

S&F in repairs, CP health faucet alongwith 1.00 to 1.50 meter standard quality SS flexible connection pipe suitable for 15mm bore pipe, complete all as specified and directed by Engineer-in-charge.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern) , white/ off white, complete all as specified and directed by Engineer-in-charge.

M&L for Non skid ceramic tiles, light shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.18 sqm not exceeding 0.38, in floors etc. laid over 15mm thick cement mortar 1:6, set and jointed in neat cement slurry @ 3.00 kg per Sqm and pointed in white or coloured cement to match the shade of tile, complete all as specified and directed by Engineer-in-charge.

S&F in repairs, PVC valveless, syphonic action type, flushing cistern of capacity 10 Ltrs low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engineer-in-charge.

S&F in repairs, PVC waste pipe 32mm bore, 65cm long plain/ corrugated including suitable adopter, complete all as specified and directed by Engineer-in-charge.

S&F in repairs, stainless steel grating dome 125 mm dia of standard quality, complete all as specified and directed by Engineer-in-charge.

S&F in repairs, Brass chromium plated shower rose 125mm size with arm, complete all as specified and directed by Engineer-in-charge.

S&F in repairs soap dish of mild steel chromium plated with brass screws complete all as specified and directed by Engineer-in-charge.

S&F in repairs, CP waste coupling 32 mm dia suitable for wash hand basin or kitchen sink, complete all as specified and directed by Engineer-in-charge.

S&F in repairs for stainless steel plate rack made of 1mm thick stainless steel sheet of size 910 mm x 460 mm x 210mm consisting of 3 shelf for bowls and one shelf for keeping six nos of big utensil and seven nos of small utensils divided by 10mm dia stainless steel hollow pipe @ 60mm centre to centre, complete all as specified and directed by Engineer-in-charge.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed by Engineer-in-charge.

S&F in repairs PVC floor trap with grating including jointin to wasted pipe in run lead, dia of outlet 100mm in cement concrete type B1 (1:2:4) complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15 mm size brass chromium plated Stop valve/angle valves fancy type cast copper alloy, complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15 mm bore angle valve / stop cock chromium plated, cast copper alloy screwed down high pressure fancy type, chromium plated with long shank and cup (concealed type) screwed for both ends for iron or for unions complete all as specified and directed by Engineer-in-charge.

S&F in repairs bib taps long body 15mm bore, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for Iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repairs, PVC connection 15mm size with brass nut of length 450 mm for hot water pipe, complete all as specified and directed by Engineer-in-charge.

S&F in repairs, brass spindles with knobs (05 No) suitable for concealed stop valves/ bib tap/ pillar tap/ hot and cold mixture etc. all as per sample, complete all as specified and directed by Engineer-in-charge.

S&F in replacement PVC syphone celenderical type flush butten complete for low level flushing cistern, complete all as specified and directed by Engineer-in-charge.

S&F in replacement PVC long bend for low level flushing cistern, complete all as specified and directed by Engineer-in-charge.

S&F in repairs HDPE PVC lid (cover) for 300 to 1000 Litres capacity PVC tanks, complete all as specified and directed by Engineer-in-charge.

S&F in repair toilet paper holder of brass chromium plated fixed to walls with CP brass screws, complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15mm bore CP brass wall mixing valve fancy type for mixing Hot and Cold water Screwed Down for iron pipe including fittings for, complete all as specified and directed by Engineer-in-charge.

M&L for 40 mm thick (average thickness) Cement concrete type B-0,1:2:4 (12.50mm graded aggregate) in patches area exe 3.0 sqm as in flooring/ roof pedding , finished even and smooth without using extra cement ,including cleaning the concrete surface by steel wire brushes, up to three stories bldgs, complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15 mm bore brass chromium plated two bay angle valves fancy type cast copper alloy, complete all as specified and directed by Engineer-in-charge.

M&L for complete removal of existing treatment from internal surfaces of walls or a part thereof (In Patches ), area exe 1.00 Sqm but not exceeding 3.00 Sqm, which is damage due to seepage or any other reason & preparing and levelling the disturbed surfaces by using wall care putty (JK/Birla white) to obtain even and smooth by using sand paper wall surfaces of that portion and than applying two coats of oil bound distemper over a coat of primer, including scaffolding arrangement, trestles, ladders, complete all as specified and directed by Engineer-in-charge.

M&L for complete removal of existing treatment from internal surfaces of walls or a part thereof (In Patches ), area exceeding 3.00 Sqm but not exceeding 5.00 Sqm , which is damage due to seepage or any other reason & preparing and levelling the disturbed surfaces by using wall care putty (JK/Birla white) to obtain even and smooth by using sand paper wall surfaces of that portion and than applying two coats of oil bound distemper over a coat of primer,including scaffolding arrangement, trestles, ladders, complete all as specified and directed by Engineer-in-charge.

Dismantling of water tanks of any type/pattern not exc 1000 ltr and removing from site to wrok complete all as specified and directed by Engineer-in-charge.

M&L for rotational moulded polythylene three layer water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut complete, screwd for iron pipe or brass ferrule size 25 mm bore complete all as specified and directed by Engineer-in-charge.

Dismantling of water tanks of any type/pattern not exc 250 ltr and removing from site to work complete all as specified and directed by Engineer-in-charge.

M&L for rotational moulded polythylene three layer water storage tanks 250 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut complete, screwd for iron pipe or brass ferrule size 25 mm bore complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (minimum weight 142 gms) complete all as specified and directed by Engineer-in-charge.

S&F in repairs 25 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (minimum weight 455 gms) complete all as specified and directed by Engineer-in-charge.

S&F in repairs 25 mm size Gun metal, globe or gate valvees, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repairs bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engineer-in-charge.

Taking down eaves gutter rain water pipe (any size of pattern) including all fittings, heads, shoes, bends, swan-necks and cleaning or fixing or removal, complete all as specified and directed by Engineer-in-charge.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed by Engineer-in-charge.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed by Engineer-in-charge.

S&F 110 mm PVC (SWR) bends of any radius, complete all as specified and directed by Engineer-in-charge.

S&F 75 mm PVC (SWR) bends of any radius, complete all as specified and directed by Engineer-in-charge.

S&F in repairs chromium plated grating with 100mm dia of approved make including fixing with 1:4 C:M to floor/nahani traps etc, complete all as specified and directed by Engineer-in-charge.

S&F in repairs 125mm x 100mm PVC gully traps square & round mouthed trap 'P' including case iron grating and fixed, including necessary excavation and earthwork , concrete in bed, surrounds, kerbs etc. and jointing to drains in CM 1:1, complete all as specified and directed by Engineer-in-charge.

S&F in repairs tubular towel rail of brass chromium plated, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings of any descreption and in any position including removal of debrish out of MoD Land complete all as specified and directed by Engineer-in-charge.

M&L for 15 mm thick cement plaster in sunken portion on fair faces of brick work or concrete surfaces in cement mortar 1:4, to be finished even and smooth without using extra cement with water proofing compound by weight as per manufacturer's instructions complete all as specified and directed by Engineer-in-charge.

M&L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm including cleaning surfaces complete all as specified and directed by Engineer-in-charge.

M&L for cement concrete type E2 1:5:10 (40mm graded crushed stone aggregate) in foundations, mass concrete and filling in sunken floor etc complete all as specified and directed by Engineer-in-charge.

M&L for 40 mm thick (average thickness) Cement concrete type B-0,1:2:4 (12.50mm graded aggregate) in patches area exe 3.0 sqm as in flooring/ roof pedding , finished even and smooth without using extra cement ,including cleaning the concrete surface by steel wire brushes, up to three stories bldgs, complete all as specified and directed by Engineer-in-charge.

M&L for 75 mm thick cement concrete type C1, 1:3:6 (using 20 mm graded aggregate) as in plinth protections, to be finished even and smooth without using extra cement complete including use of necessary form work complete all as specified and directed by Engineer-in-charge.

Demolition of stone slab and tiles of any description or thickness in floor, aprons etc complete all as specified and directed by Engineer-in-charge.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm stone aggregate as in sub base, complete all as specified and directed by Engineer-in-charge.

S&F for machine pressed precast concrete interlocking paver block any shape and size,with grey cement and pigment to match, confirming to IS 15658-2006 of 60mm thick M-35 grade laid over 50 mm thick sand cushioning complete all as specified and directed by Engineer-in-charge.

S&F for 16 to 18mm thick Granite slabs (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cill, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble laid over 15mm thick screed bed in CM 1:4. complete all as specified and directed by Engineer-in-charge.

S&F in repairs 40mm bore Brass chromium plated bottle traps for wash basins with inlet and outle screwed for pipe or connections including necessary packing, union and cap and fixed of minimum weight 270 gms complete all as specified and directed by Engineer-in-charge.

Dismantling of boarding, any description, fixed in any position with nails complete all as specified and directed by Engineer-in-charge.

S&F Prelaminated particle board,12 mm thick interior grade prelaminated both side decorative choice lamination & other side balancing white lamination, with all sides 12x5mm wooden beding.fixed with screws to timber frame work complete all as specified and directed by Engineer-in-charge.

S&F in repairs continuous (piano) hinges, brass, bright finish complete all as specified and directed by Engineer-in-charge.

S&F in repairs for extruded aluminium alloy handles, fabricated type, anodised, 125 mm size complete all as specified and directed by Engineer-in-charge.

S&F in repair Magnetic catcher for wooden cupbord with complete closer macanigum claps and clips fix with stainless steel screw complete all as specified and directed by Engineer-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-charge.

Framed work such as grills, gratings etc with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & incl one coat of red oxide primer complete all as specified and directed by Engineer-in-charge.

Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified and directed by Engineer-in-charge.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

Chaudhary Constructions

M/S.Parmod Johar

UNIVERSAL ENTERPRISES