PROVN OF SANTRY POST AND GUARD ROOM WITH TOILET AT ORI GATE, 1TTR, 1STC AND PROVN OF 02 X COMMON URINAL BLOCKS FOR TRAINEES WITH SOAK PIT, WATER CONNECTION, ELECTRIC CONNECTION AND SANITARY FITTINGS AT 4TTR, 1STC UNDER GE (WEST) JABALPUR

Amount

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft /loose soil.complete all as specified and as directed.

Excavation in trenches l,n exc 1.5m wide and n exc 1.5m in depth ;for foundation etc.or for shafts well cesspit,maholes, pier holes etc.n exc 10 sqm on plan area as in soft /loose soi complete all as specified and as directed

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering,complete all as specified and as directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for Hardcore broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete,complete all as specified and as directed.

M&L for anti termite treatment to the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface,complete all as specified and as directed.

M&L for anti termite treatment the soil under plinth protection at the rate of 5 litre of emulsion per sqm of surface area,complete all as specified and as directed.

M&L for anti termite treatment the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimetre wall,complete all as specified and as directed.

Returing, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft /loose soil,complete all as specified and as directed.

Removing excavated material not exceed 50 m depositing where directed level n exc 1.5 mtr above the starting point,complete all as specified and as directed.

S&F for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming,complete all as specified and as directed.

S&F for Mild steel TMT bars 6mm to 8mm dia and cut to length bent to shape required, including cranking, bending and binding as in stirrups, spacers and binders etc. with MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finish complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions,Rough finished surfaces of concrete,square, rectangular or polygonal,complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders,bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floor and beam etc,complete all as specified and as directed..

Formwork to chajjas, troughs and similar items including edges fair finished complete all as specified and as directed.

Use & waste for form work to soffits of suspended slab such as roof slab, floor slab , landing and similar work; not exc 200 mm thick horizontal or sloping, finished fair and even complete all as specified and as directed.

Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide Rough finished surfaces of concrete complete all as specified and as directed

M&L for RCC -M-25 ( Design mix) using 20mm grades stone aggregate as in foundation including raft footings, foundation beams, plinth beams, bases of columns and the like complete all as specified and as directed.

M&L for RCC -M-25 ( Design mix) using 20mm grades stone aggregate as in Columns, pillars, piers,posts and struts complete all as specified and as directed.

M&L for RCC -M-25 ( Design mix) using 20mm grades stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M & L for RCC M-25 design Mix using 20mm graded aggregate in slabs supported on wall and beams and column in floors,roofs landing etc,complete all as specified and directed.

M&L for RCC -M-25 ( Design mix) using 20mm grades stone aggregate as in chajjas roof projection etc complete all as specified and as directed.

M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and as directed.

M&L for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for roofs-

(a) Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster.

(b) One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces.

(c) One layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm consisting 3mm thick reinforced with polyster non wove fabric shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame.

(d) Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm.

Supply only integral water proofing compound,complete all as specified and as directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

M&L for Brickwork with fly ash bricks or brick tiles in brick on edge walls (less than1/2 brick thick), built in cement mortar (1:4) complete all as specified and as directed.

M&L for 10mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and as directed.

M&L for 15mm thick rendering on concrete/brick surfaces in CM 1:4 with water proofing compound as per manufactures instruction finished even and smooth without using extra cement complete all as specified and as directed. ( Note:- WPC shall be measured and paid separately)

M&L for 5mm thick rendering on Concrete Surfaces, ceiling in Cement Mortar 1:3 finished surface Even and Smooth, without using extra cement,complete all as specified and as directed.

M&L for applying Two Coats of Cement Base Paint over a coat of alkali reistant primer newly Plastered Surfaces of external Walls including preparation complete all as as specified and as directed.

M&L for applying two Coats of oil emulsion distemper over a coat of chalk whitening primer over 1mm thick wall care putty on Newly Plastered Surfaces of internal wall including preparation complete all as specified and as directed.

M&L for applying three coat of white wash as in ceilling on newly plastered surfacces including preparation complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) are of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm mm thick as in vertical surfaces such as dados/skirting etc set and jointed in neat cement slurry and in coloured cement to match Coloured over and including 10mm thick plastering in CM 1:4 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm,450x350 or 350x250 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including 10 mm thick rendering in cement mortar 1:4 finished rough to fix tiles complete all as specified and as directed.

M&L for 25MM thick cement concret Type B-1 1:2:4 (Using 20mm graded aggregate) as in sub base, floors and pavings etc,complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base to floor complete all as specified and as directed

Material and labour 20- 25 mm thick machine cut kota stone flooring laid and jointed with neat cement slurry mixed with pigment to match the shade of the slab laid over and including 20 mm thick screed bed in cement mortar 1:6 including rubbing and polishing complete all as specified and as directed.

M&L for 18 to 20 mm thick machine cut kota stone as in vertical surfaces risers of steps , skirting, dado and pillars etc set and jointed in neat cement slurry and pointed with grey cement mixed with pigment to match the colour of stone slab laid over and including 10 mm thick rendering in cement mortar 1:4 including rubbing and mirror polishing complete all as specified and as directed.

S&F for pressed steel door frame 105x60 mm with one or more rebated incl necessary fixing lugs hings, lock strick , etc complete all as specified and as directed.

S&F for Pressed steel frames of size 125x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S & F for 35 mm thick factory made plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and as directed.

S & F for 35 mm thick 1st class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part -I,section 8,clause 8.24 (a) complete all as specified and as directed.fitted to chowkhats for doors etc complete all as specified and as directed.

S&F for 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F, for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F, for 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed

S&F for 300mm long mild steel ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and as directed.

S&F for steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F for steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or weldedcomplete all as specified and as directed.

S&F for steel windows or ventilators, fixed type with glazing bars,complete all as specified and as directed.

S&F for mild steel framed work such as guard bars/grills,grating etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chrome primer complete all as specified and as directed.

S&F for stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and as directed.

S&F for 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F for 4mm thick figured glass, pinn headed type and glazing with oil putty in square n. exc 0.5 sqm each panes complete all as specified and as directed.

S&F for PVC door frame size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinf with MS square tube supplying & fixing in opening as per specification,complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails . M,S frame shall be covered with heat moulded plain colour PVC ,C, channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails , lock rails and bottom rails on either side and as gap insert for top rail and bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S frame welded /sealed to the stiles & rails with suitable PVC sheet beading , and jointed together with solvent cement , supplying and fising in the frame at site as per specification and drawing,complete all as specified and as directed.

S&F, for 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed

S&F, 100mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and as directed.

S&F for 125 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on newly wooden surface of any description over 10 cm width or girth including preparation complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on newly steel surface of any description over 10 cm width or grith including preparation complete all as specified and as directed.

M&L for Cutting holes in brick walls in exc half brick and nexc one brick in cement in mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 (using 20mm graded stone aggregate complete all as specified and as directed.

S&F 15mm bore GI Tubes medium grade, with all fittings and fixed to wall and ceiling or laid in floors complete all as specified and as directed.

S&F 20mm bore GI Tubes medium grade, with all fittings and fixed to wall and ceiling or laid in floors complete all as specified and as directed.

S&F 25mm bore GI Tubes medium grade, with all fittings and fixed to wall and ceiling or laid in floors complete all as specified and as directed.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

S& F for 15 mm bore bib tap cast copper alloy, chromium plated, long body fancy type with capstan headed, screwed down, screwed for iron pipe complete all as specified and as directed.

S& F for Stop valve / Angle valve fancy type cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.

S&F for 15mm dia pillar tap cast copper alloy chromium plated capstan head screwed down high pressure with or without lettered hot or cold with long screw shank and fly nutt screw for iron pipe complete all as specified and as directed.

S&F for PVC connection 450 mm long, 15mm size with PTMT nuts complete all as specified and as directed.

S&F for grating doom 100mm dia PTMT (Min weight 25 grms),complete all as specified and as directed.

S& F for 15mm dia chromium plated shower rose 125 mm size and with or without swivel joints including fixing to pipe and union complete all as specified and as directed

S & F for Towel rail 600 mm long and 20 mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and as directed.

S&F for CP waste fittings brass chromium plated for sink 32mm dia with long screws sinks and fly nuts , flange end bedded in red led cement and other in fixed complete all as specified and as directed.

S&F for vitreous China squatting pan of pattern Orissa Pan , size 580 x440 mm white with integral foot rests any pattertn (excl flushing cistern and flush pipe) complete incl provn of lime concrete bedding connection to flush pipe , trap etc & making good complete all as specified and as directed.

S& F for Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall, complete all as specified and as directed.

S & F for Vitreous china urinal half stall type ,white including connection to flushing pipe and outgoing pipe complete all as specified and as directed.

S & F for urinal spreader chromium plated connection to flushing pipe and outgoing pipe complete all as specified and as directed.

S&F for 10 ltr PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe of 32mm dia complete all as specified and as directed.

M&L for 32 mm bore low density polythelene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm fixed to walls or in floors etc complete all as specified and as directed.

S&F for 500 ltrs rotational moulded polythine water storage tanks( cylinder vertical with closed top) hoisted and fixed in position including ball brass valves,high pressure with polythene float and flynut complete screw for iron pipe or brass ferrule all as specified in SSR Part-I,complete all as specified and as directed.

S & F for 20mm bore ball valve high pressure PTMT with epoxy coated aluminium rod & high density polythene float ball and fly nut screwed for iron pipe complete all as specified and as directed.

S&F for 20mm dia gun metal,globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed,complete all as specified and as directed.

S&F for 25mm dia gun metal,globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed,complete all as specified and as directed.

S&F for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors, trenches complete,all as specified and as directed.

M&L for 75mm dia PTMT multi floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F for PVC (SWR) gully trap 125 x 110 mm setting and jointing with solvent cement complete all as specified and as directed.

S&F for 110 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings ljoits fixed to walls complete all as specified and as directed.

S&F for 110 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed.

S&F for 75 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed.

S&F for 110mm dia PVC(SWR) Tee of with access door etc complete all as specified and as directed

S&F for 110 mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and as directed.

S & F for stack clamps out of 50mm by 5mm flat iron stays, including bolts and nuts and securing ends of stays to wall of roof for 100 mm bore etc complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. (Note :-reinforcement where provided shall be measured and paid seprately)

Excavation in trenches, exc 1.5m wide but n exc 3.0m in depth ;for foundation etc.or for shafts well cesspit,maholes, pier holes etc.n exc 10 sqm on plan in soft /loose soil complete all as specified and as directed

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as speified and as directed.

M&L for broken bricks or brick bat loose filligs with aggregate of gauge 80 to 150mm in soakage pits,soakage well complete all as specified and as directed

M&L for Brickwork with fly ash bricks in one brick thick honey-comb walling, built in cement mortar 1:4 complete all as specified and as directed.

M & L for precast cement concrete type B-1 1:2:4 ( using 20 mm graded stone aggregate ) as in landing cover slab and set in CM 1:4 including necessary form work if required complete all as specified and as directed.

S&F for TMT bars 8mm dia cut cut to length bent to shape required including binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed

M&L for double wall corrugated (DWC) pipes 200 mm bore inner dia class class SN-8 confirming to IS-16098:2013 (Part-2) laid and jointed, with collars complete all as specified and as directed

M&L for Concrete bed to drain pipes including packing under and haunching against the sides of pipes after the air laid and tested in Cement Concrete 1:3:6 type C2 (using 40mm graded stone aggregate) for bore of pipes 200 mm dia complete all as specified and as directed.

M&L for Extra for forming fair finish for channel 30 cm inner girth in cement concrete using extra cement incl form, mould,mitred/stopped etc complete all as specified and as directed

M&L for 40mm thick damp proof course to horizontal or vertical surfaces incl necessary form, work in cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate )and applying evenly a coat of blown type bitumen @1.50kg per sqm and binding with dry sand @0.50cum per sqm complete all as specified and as directed

S&F for framed work as in doors or gates of angle or other section with gusset plates ,rails,braces etc complete drilled for fixing of steel gate sheeting or other covering,doors ,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,runing rails and guides ) and hanging also fastning and fixing complete all as specified and directed. confirming to FE-290 ( Gde E-165) complete all as specified and as directed

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and as directed

M&L for Granite (of any type ) 20 mm thick work (table rubbed and polished ) in steps ,jambs,pilllars,window cill,cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2)using marble dust with admixture of pigment to match with shade of Granite laid over 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for rounding to edges of granite stone slabs one edge such as in counter type WHB platform etc. complete all as specified and as directed

S&F for CP waste fittings brass chromium plated for sink 40mm dia with long screws sinks and fly nuts , flange end bedded in red led cement and other in fixed complete all as specified and as directed

Supply and fixed PVC waste pipe 32mm bore of size and 900mm long complete all as specified and as directed.

M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed

M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, confirming to IS 15658-2006of 60mm thickness M 35 Grade complete all as specified and as directed.

Supplying , fixing & Hoisting and fixing in position and connecting 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top thred type) 2 Layer including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and as directed.

Supply and fix 20mm size Ball brass valves of high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Cutting of existing pipe for insertion of new connection with clamp of required size made of MS complete all as specified and as directed.

S & F 50 mm dia steel water tubing galvanised ,medium grade with all fittings and fixed complete to walls , or in floors complete all as specified and as directed.

S & F 40 mm dia steel water tubing galvanised ,medium grade with all fittings and fixed complete to walls , or in floors complete all as specified and as directed.

Supply and Fixing 50 mm dia Gun metal Gate Valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Supply and Fixing 40 mm dia Gun metal Gate Valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

M&L for Sub Main Wiring with two single core PVC insulated cable of size 4.0 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 20mm dia with all conduit fitting,fixing accessories and 2.5 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and as directed. Note :- Two Nos of 4.00 Sqmm Wire and One No of 4.0 Sqmm Earth wire in One RM length Measured as one unit length.

M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in Anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal incl cutting, chasses and making good disturbed surface to match with existing finish with plaster for complete all as specified and as directed.

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ex fan controlled by one, one way switch 5 Amps

(c) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

Description all as per item No 129 here in befor but with 1100 volts grade copper standard conductor cable of size 2.5Sqmm with 1.5Sqmm solid copper conductor PVC for 3 pin switch socket outlet15Amp independent board complete all as specified and as directed.

M&L for switch socket combination multipin 5 and 16 Amps AC 230 volts flush type complete all as specified and as directed.

S & F for Switch Piano type single pole 5 amp, 230 Volts complete all as specified and as directed.

S & F for socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and as directed.

S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and as directed.

Supply and fixing in replacement fan regulator modular step type capacity of polycarbonite complete all as specified and as directed.

Supply and fixing Single phase ceiling fan 1200 mm permanent magnet brushless DC Motor 230 v 50 Hz single phase 26-30watt rated current 0.16 amp,pf 0.98 370/360 rpm air delivery 220m3 rated service value 629m3/min/watt no of blades three type of blade leaf 1.05 mm thick aluminium sheet remote control radio frequency 5 speed +off timer option speed regulation class of insulation two nos bearings including connecting wire complete all as specified and as directed.

Supply & Fixing for Smart bright Batten Series, LED luminaire using LED 22 watt 110 Lumens/watt with diffuser which ensures uniform distribution and comfort, batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminium housing, Energy efficient, Flicker free start Inbuilt driver unit, Suitable for wall and ceiling mounting using brackets with and including the luminaire testing on completion as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), complete all as specified and as directed.

Supply & fix in replacement of LED Security Light Luminaire 35 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.

Supply & Fixing in repair sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 8 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified and as directed.

Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified and as directed.

S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, complete with Metalic louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.

Supply , laying and testsing cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cab les ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 16 sq mm 2 core complete all as specified and as directed.

Supplying and fixing,testing the water heater storage type 25 litres, BEE Five star Rated capacity and after connecting electric and water connection and screwing nuts and bolts , anchor hold fast to fixed on wall and making the good the disturbed surface, complete all as specified and as directed.

Supply & Fixing in repair sheet metal enclosure MCB DB single pole and neutral, 240 volts, 4 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified and as directed.

S&F in repair Bulk head endura LED light fitting complete with10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suitable size & length complete all as specified and as directed.

Supply and lay DWC pipe 38 OD and 63 mm including necessary excavation and return filling for cable protection complete all as specified and as directed.

ANAMIKA CONSTRUCTION (BID ID -3330770)