Construction of Hi Tech Nursery Mist Chamber Poly House at Central Nursery Sangrambhatta Kishtwar Kishtwar Forest Division for the year 2023 24 under CAMPA NPV

Amount

Deep drilling of bore hole 200 mm dia as per IS specification by using ODEX method

Providing ang fixing of 200 mm dia MS Casting Pipe

Providing/fitting of G.I Pipe 50 mm dia ( Medium Class) 15.00 M to 25.00 M. Then cutting of G.I/ Pipes of 6.00 M length in 03.00 M each. Tehn providing and fabrication of M.S Flanges and welding the same on both sides of G.I Pipes in proper alignment, Complete Job including cost of G.I Pipe, FS Flanges and other miscellaneous items and cost of carriage/ transporation of material from Workshop to the site of work. Complete Job.

Providing, fitting, installation, testing and commissioning of Submersible pump set of paramenters 50-80 LPM at a head of 40 M to 50 M of reputed make viz. KSB, Crompton, Kirlosker, CRI, LUBU, Calama etc. or equivalent make. The job includes carriage of material to the site of work and lowering of submersible pump set in to the bore hole by way of coupling of flanged G.I Riser Pipes with fixtures such as nuts, bolts & washers up to a depth of 15.00 M to 25.00 M ( Approx.) and making of electricl connections with starter panel. Fabrication of well cap, tie rod along with G.I bend, elbow for delivery of water. Complete job includes cost of material, labour, T&P and transporation charges, Complete Job.

Providing, fitting and installation of single phase submersible starter controller in sheet enclose type of reputed make including fabrication of steel enclosure outdoor electricls cabinets with canopy for motor starter. Complete Job.

Providing and laying of 4 sq. mm 3 Core submersible cable 40.00 M to 50.00 MM & also providing ad fitting of 2-Core PVC insulted copper conducter 6.00 sq. mm- 30.00 M to 60.00 M ( Aprrox) as service line required from LT Pole to starter panel of reputed make. Making of electrial connections with the starter panel, service line and submersibale pump set after properly thimbling and testing and commissioning thereof. Complete Job.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:. in all kinds of soil.

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 40 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 20 mm dia. nominal bore

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. Qty vide item no-7 @ 90%

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 40 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, complete 20 mm nominal bore

Providing and fixing HDPE Pipe 90mm 8 Kg PN

Providing and fixing HDPE Pipe 63mm 8 Kg PN

Providing and fixing HDPE Pipe 50mm 8 Kg PN

Providing and fixing HDPE Tee 90mm

Providing and fixing HDPE Reducer 90x63mm

Providing and fixing HDPE Reducer 50x63mm

Providing and fixing HDPE Lbow 50mm

Providing and fixing HDPE Tee 63mm

Providing and fixing HDPE End Cap 50mm

Providing and fixing Manual Ballvalve 63mm

Providing and fixing Service Sedal 50mmx32mm

Providing and fixing Valve Boy

Providing and fixing Swing joint 32mm

Providing and fixing QCV with Key 32mm

Providing and fixing QCV Valve box

Providing and fixing Popup

Providing and fixing Air Release valve 63mm

Providing and fixing Sand filter 90mm

Providing and fixing Water Motor 5 HP of ISI brand of standard make

Providing and fixing Motor Starter

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats completea) 15 mm nominal bore

Excavation work in excavation by manual means for foundations, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts wells cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5 M including the disposal of excavated earth upto 1 M from the cutting edge, disposed earth to be levelled and neatly dressed in all kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:5:10 (1 Cement : 5 coarse sand :10 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 40mm nominal size) Crushed

Centering and shuttering including strutting, propping etc. and removal of form for : foundations, footings, bases of columns, etc. for mass concrete

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level Qty vide item No:-40

12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and laying Reinforced Cement Concrete1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15°slope. excluding cost of centering and shuttering ,all work upto floor V level

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Qty wide item no -43

Centring and shuttermg including strutting, propping etc.and removal of form for

Centring and shuttermg including strutting, propping etc.and removal of form for

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats completea) 15 mm nominal bore

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing & Fixing Green House Net

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Carriage of materials from source to site of work by M.T. (a) Sand

(b) Bajri