Repairs to toilets, sanitary fittings, plumbing, internal water supply, rolling shutters, sliding steel shutters, wooden/ steel/ aluminium/ PVC joineries, guard bars, cupboards etc. at Military Station Bhusawal under GE (South) Ahmednagar

Amount

Taking down chowkats or frames with shutters(without taking off shutters from the frames) exc 1.50 sqm but not exc 4 sqm each and removing from and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed.

Taking down chowkats or frames with shutters(without taking off shutters from the frames) n.exc 1.50 sqm each and removing from and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed.

Taking down shutters of any description exc 1 sqm & n.exc 2 sqm each leaf and removing from site complete all as specified & directed.

Taking down shutters of any description exceeding 2 sqm each leaf and removing from site complete all as specified & directed.

Plain solid and straight chowkat’s and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue, pinned at joints, of second class hard wood, fixed in position complete all as specified and directed.

Factory made steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars,dovetailed or welded complete all as specified and directed.

Flush shutters 40 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

35 mm thick 2nd class Hard wood glazed and skeleton shutters factory made, open rebated and prepared to receive glass, guaze, etc divided into squares with plain chamfered or rounded, mitred and rebated sash bars, any numbers, edge of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. size of members as specified in SSR part -I, clause 8.24(a) complete all as specified and directed

30 mm thick 2nd class Hard wood glazed and skeleton shutters factory made, open rebated and prepared to receive glass, guaze, etc divided into squares with plain chamfered or rounded, mitred and rebated sash bars, any numbers, edge of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. size of members as specified in SSR part -I, clause 8.24(b) complete all as specified and directed

Factory made PVC solid, single door frame (chowkats) of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in SSR part-II 2010 Section-8, clause 8B.3 complete all as specified and directed by Engr-in-Charge.

Factory made solid panel PVC door shutter 30 mm thick [style] consisting of a frame made out of MS tubs for top and bottom rails,MS frame shall be covered with heat molded plain colour PVC `C` channel having a PVC steel strip of 20mm width stuch inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inseert for top rail and bottom rail, Panneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable sheet beading, and joined together withj solvent cement, supplying & fixing in the frame at site as per specification & drawing and all as directed.

100 mm size mild steel butt hinges medium weight colled rolled, fixed with welding to existing preesed steel chowkhat/shutter complete all as specified and directed.

75 mm size mild steel butt hinges medium weight colled rolled, fixed with welding to existing preesed steel chowkhat/shutter complete all as specified and directed.

125 mm size extruded aluminium alloy handles fabricated type anodised and fixed complete all as specified and directed.

150 mm size extruded aluminium alloy handles fabricated type anodised and fixed complete all as specified and directed.

All as per serial item No, 15 here-in-before but fixed in repairs.

All as per serial item No, 15 here-in-before but aluminium handle of size 100 mm fixed in repairs.

Aluminium anodised tower bolt of extruded section of 200 mm size, fixed complete all as specified and directed.

All as per serial item No, 18 here-in-before but fixed in repairs.

Aluminium anodised tower bolt of extruded section of 150 mm size, fixed complete all as specified and directed.

All as per serial item No,20 here-in-before but fixed in repairs.

300 mm long aluminium sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections,fixed complete all as specified and directed.

All as per serial item No,22 here-in-before but fixed in repairs.

250 mm long aluminium sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections,fixed complete all as specified and directed..

Mild steel work as in bands, straps , supports or stays, hold fast & similar small articles conforming to Fe-290 grade E-165 complete all as specified and directed.

5 to 10 mm dia Mild steel screw bolts (machine made) 5 to 10 mm dia of neck with hexagonal or square heads at one end and screwed the other fitted with washer and one nut exceeding 5 cm but nexc 10 cm long complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description), from wooden/steel frames stone concrete or brick surrounds glazed putty or fixed with beads including punching or drilling out old glazing pines/spring clips complete all as specified and directed.

3 mm thick sheet glass ordinary quality & glazing with oil putty or wooden beading in squares n.exc 0.50 sqm each pane complete all as specified and directed.

3 mm thick sheet glass figured glass, pin head type with oil putty or wooden beading in squares n.exc 0.50 sqm each pane complete all as specified and directed.

Preparation of new wooden surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of primer complete all as specified and directed.

Mild steel framed work such as barred iron doors and similar works including all pintle hinzes, hasp/staple etc. conforming to Fe 290. gde-E-165 complete all as specified and directed.

18/19 mm thick block boards grade 1 quality, exterior grade, decorative type with decorative face veneers on one face fixed to timber frame work with external teak wood lipping 6 mm thick fixed complete all as specified and directed.

12 mm thick prelaminated particle board exterior grade, prelaminated on one side with decorative choice lamination fixed with screws to timber frame work as in pelmet boxes etc complete all as specified and directed.

Solid PVC wall lining consisting of 5 mm thick single side prelaminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as directed.

Solid PVC 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification adn drawing complete all as directed.

Anodised aluminium frame for doors, windows, ventilators powder coated with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Anodised aluminium door shutters, powder coated aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

Anodised aluminium window and ventilator shutters powder coated, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 no.). hinges type B-21,100 mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

Glass panes 5.5 mm thick in squares exc 0.5 Sqm in each pane with solar control film as in aluminium doors and windows, fixed complete all as specified and directed.

12 mm thick prelaminated particle board exterior grade, prelaminated on one side with decorative choice lamination fixed with screws to frame work complete all as specified and directed.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as directed.

Factory made steel ventilator with top hung shutter including hinges, steel peg stays etc complete all as specified & directed.

Mild steel framed guard bars 10 to 12 mm dia confirming to Fe-290-0 or Fe-330-0 welded to steel ventilators & windows etc complete all as specified and directed.

Stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.4 mm and fixed with stanless steel wire staples fixed to wooden/steel frames all as specified and directed.

Stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.4 mm and fixed with stanless steel wire staples fixed to wooden/steel frames, fixed in repairs all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as directed.

Mild steel rolling shutter with thickness of laths 1.25 mm without ball bearing, as specified including top cover, anchoring rod, hasp staple, and one shop coat of primer, erected, in position as directed complete, push pull or manual type complete all as specifide and directed

Repairs to mild steel rolling shutter upto area 20 Sqm each shutter including greasing, oiling, etc. including taking down, if required and refixing in same position after making the rolling shutter fully functional complete all as directed

Repair to mild steel sliding doors of size 2.3 m x 3.8 m and approx weight 205 Kg per shutter including greasing , oiling etc of rollers, replacement of angle iron supports including taking down if required, refixing in the old position, and making the doors in operating condition including all necessary scaffolding. Note: Supporting angle iron supports, rollers etc will be measured and paid seperately.

Disconnecting existing tanks of 1000 litres capacity, setting aside (or lowering if required) for cleaning and removing all scale and dirt, etc. from tanks and mouths of circulating pipes etc. and hoisting reconnecting and re-fixing in position complete all as directed.

Disconnecting existing tanks of 500 litres capacity, setting aside (or lowering if required) for cleaning and removing all scale and dirt, etc. from tanks and mouths of circulating pipes etc. and hoisting reconnecting and re-fixing in position complete all as directed.

Dismantling water tanks of capacity exc 250lit and n exc 500lit and removing to store complete all as directed.

Dismantling water tanks of capacity exc 500lit and n exc 1000lit and removing to store complete all as directed.

500 ltrs capacity rotational mounded polythene water storage tanks (cylindrical vertical covered with lid on top) ISI marked, hoisted and fixed in position , complete all as specified and directed.

1000 ltrs capacity rotational mounded polythene water storage tanks (cylindrical vertical covered with lid on top) ISI marked, hoisted and fixed in position , complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement morter bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, as in floors etc. laid over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

Glazed ceramic tiles (plain or printed) of each tile of size exceeding 0.11 Sqm but not exceeding 0.18 sqm, 7 mm thick as on vertical surfaces like dado, skirting etc jointed in neat cement slurry and pointed in coloured cement laid over and including 10 mm cement plaster as in backing coat in CM 1:4 complete all as specified and directed.

Chequered cement concrete tiles 20 cm x 20 xm x 25 mm thick laid over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in mixture of white & grey cement in equal proportion and no pigment complete all as specified and directed by Engr -in-Charge.

Coloured vitrified tiles, 10 mm thick (Square or rectangular) area of each tile exc 0.36 Sqm but n exc 0.42 sqm as in floors/skirting set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over & including 15 mm screed bed in CM 1:6 complete all as specified and directed by Engr -in-Charge.

All as per serial item No. 61 here-in-before but in verticle surfaces such as skirting/dado laid over 10 mm thick cement plastering in CM 1:4 on brick or concrete surface complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings nexc 15cm thick (below or above ground level) un-reinforced complete all as specified and directed.

Cement concrete 1:3:6, type C-2, using 40 mm graded stone aggregate, 75 mm thick as in plinth protection including finishing the surface fair and even laid in alternate bays system, length of each bay n exc 1.5 mtr, including forming 12mm wide and 50 mm deep joint, filled with mastic filling to the full depth comprising mixture of one part heated blown bitumen of 85/25 penetration and two parts sand by (volume) complete all as specified and directed

Water closets, Vitreous China, Orissa Pattern of size 580 x 440 mm, with white integral foot rest including cast iron `P' or `S' trap & connections to flushing pipe, anti syphonage pipe etc, fixed in repairs complete all as specified & directed.

Vitreous china wash down water closet pan (pedestal pattern/anglo pattern) white (excluding fixing bolts, flushing cistern and flush pipe) fixed in repairs complete all as specified and directed.

Plastic water closet seat, of any coloure closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified and directed.

10 ltr capacity PVC coloured flushing cistern high/low including ball valve, bracket inlet, outlet PVC pipe, fixed in repairs, complete all as specified and directed.

Vitreous china wash basin, white , flat back size 550 mm x 400 mm including 15mm dia CP pillar tap, CP waste coupling chain and plug and PVC waste pipe including brackets etc fixed in repairs complete all as specified and directed by Engineer-in-Charge.

15 mm bore pillar taps, cast copper alloy fancy type, with capston heads, chromium plated fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shank, fixed in repairs complete all as specified and directed.

Bib taps fancy type chromium plated 15 mm bore cast copper alloy with capstan heads, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs complete all as specified and directed.

Stop valves 15 mm bore fancy type chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and directed.

Brass CP mixer for WHB/sinks for mixing hot & cold water screwed down for iron pipe 15 mm bore, fixed in repairs complete all as specified and directed.

PVC connection 60 cm long 15 mm bore with 2 nos CP brass check nuts fixed in repairs complete all as directed.

S&F in repairs ball valve bore dia of pipe in 25mm high pressure of PTMT, with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.

Brass chromium plated shower rose with or without swivel joints any size, inclusing fixing to steel pipe or union fixed in repairs complete all as specified and directed.

Ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 20 mm bore iron pipe (minimum weight 210 gm),fixed in repairs complete all as specified and directed.

Bib taps PTMT 15 mm bore ,any colour , high pressure fixed to iron pipe, fixed in repairs, complete all as specified and directed.Make-Prayag,Polytuff

Pillar tap PTMT 15 mm bore any colour screwed for iron pipes or PVC connection , fixed in repairs, complete all as specified and directed.Make-Prayag,Polytuff

Taking up or down GI steel tubing and connections including cleaning for re-fixing or removal of 15 mm bore pipe complete all as specified and directed.

Taking up or down GI steel tubing and connections including cleaning for re-fixing or removal of 20 mm bore pipe complete all as specified and directed.

15 mm bore galvanised iron tubing medium grade, ISI marked, complete with all fittings and fixed complete, concealed in walls or laid in floors as in repairs complete all as specified and directed.

20 mm bore galvanised iron tubing medium grade, ISI marked, complete with all fittings and fixed complete, concealed in walls or laid in floors as in repairs complete all as specified and directed.

Refixing old GI steel tubing 15 mm bore and connections in new or old position (Walls, ceiling,floors, etc) complete with all new fittings and concealed in walls or laid in floors etc complete all as specified and directed.

Refixing old GI steel tubing 20 mm bore and connections in new or old position (Walls, ceiling,floors, etc) complete with all new fittings and concealed in walls or laid in floors etc complete all as specified and directed.

Plain cement concrete 1:2:4, type B0 using 12.5 mm graded stone aggregate, 25 mm thick as in flooring finished even and fair complete all as specified and directed.

Plain cement concrete 1:4:8, type D2 using 40 mm graded stone aggregate, 75 mm thick as in sub base of floors complete all as specified and directed.

110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floors/trenches, as in repairs, complete all as specified and directed.

110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls as in repairs complete all as specified and directed.

PVC (SWR) branch piece, double (double Y) equal or unequal with oval access door 110 mm bore fixed in repairs complete all as specified and directed.

PVC (SWR) bends any radius with access door of 110 mm bore, fixed in repairs complete all as specified and directed.

PVC (SWR) bend any radius, 110 mm bore, fixed in repairs complete all as specified and directed.

PVC waste pipe for wash hand basins, fixed complete all as specified and directed.

75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floors/trenches as in repairs complete all as specified and directed.

75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls as in repairs complete all as specified and directed.

PVC (SWR) branch piece, single (single Y) equal or unequal with oval access door 75 mm bore fixed in repairs complete all as specified and directed.

PVC (SWR) bends any radius with access door of 75 mm bore, fixed in repairs complete all as specified and directed.

PVC (SWR) bend any radius, 75 mm bore, fixed in repairs complete all as specified and directed.

Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing, 60 cm long, fixed with screws complete all as specified and directed.

Tubular towel rail, brass chromium plated, 20 mm dia, D type, 60 cm long between flanges, fixed with screws complete all as specified and directed.

Health faucet (hand shower) with 1.2 metre long PVC tube and wall hook. Model No. ALD-563 of Jaquar or equivalent, fixed in repairs complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

Brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in CM 1:6, complete all as specified and directed.

15 mm thick rendering in CM 1:4 on stone masonary surfaces or other than fair faces of brick surface/ concrete surfaces, finished even and fair (on external surfaces) without using extra cement complete all as specified and directed.

10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surface finished even and smooth with sagol finish without using extra cement complete all as specified and directed.

Preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of chalk whiting complete all as specified and directed.

Preparation of newly plastered wall surfaces and applying two coats of cement based paint complete all as specified and directed.

Post construction anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specified and directed.

Post construction anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerocene based solution) @ 0.5 litre per /hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed.

Prepairing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer

Prepairing old steel or iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint.

CPVC pipes 20 mm outer dia SDR-II and plain CPVC SDR II fixed on walls, ceiling or laid in floors all as specified and directed.

20 mm thick granite machiene cut bedded and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of ganite stone including grinding and polishing over and including 20 mm thick screed bed of CM 1:6 all as specified and directed.

JANARDHANANDSONS

Bhirud Electric Stores

MS. A.S. CONSTRUCTION