COMPREHENSIVE MAINT INCL DAY TO DAY MAINT, PERIODICAL SERVICES, OTHER MISC B/R REPAIR WORKS FOR REPUBLIC DAY PARADE CAMP AND WCIC CAMP AT CPG CAMP AREA, RPSO COMPLEX, PARADE ROAD IN THE AREA OF AGE B/R-I UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) including iron mangory not exc. 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) including iron mangory exc. 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down shutters of any description not exceeding 2.00 Sqm each complete all specified and directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F flush door shutter 35mm thick solid core construction with Block board and plywood face panels, commercial type on both sides. complete all as specified and as directed.

S & F 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part -I section 8 clause 8.24 (a) supplied and fitted to chowkats

S & F framed work such as in door frame, door shutters / gate of angel , Flat iron or other section with MS sheet , cladding , gusset plates, rails, braces, , hold fast etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified and directed

S & F Mild steel, plain, black sheet 1.60mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

S & F for Factory made UPVC (white/Off white colour sliding window three track made out of extruded profiles with wall thickness of members as 2.3mm (1-0.2mm). Window profile with hollow section with multi chamber frame (60mm x 62mm) sash bars (42mm x 67mm). Sliding inter lock (one vertical length in each shutter 45.5mm x 28mm). Glazing head (24.5mm x 16mm) members will be mitred, cut and fusion welded in all corners including drilling of holes for fixing hardware and drainage of water. Making arrangement for fixing of hardware, EPDM gaskets 1.2, 1-0.2mm thick galvanised steel frame (30mm x 21.50mm). Sash bars (30mm x 18mm) profile to be inserted in required profile frame and will be fixed to the wall with 8mm x 100mm long fastners. Hardware : Touch lock to be of Zinc alloy (white powder coated), Steel roller system including 5mm thick glazing with selelcted quality glass, Aluminium track on bottom rail to be of hree track sliding frame, wool pine for sliding sash and interlock, complete all as specified and as directed. (Area exceeding 2.00 Sqm). (Note:The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)

S & F factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and with stainless steel wiremesh (0.36mm nominal dia of wire and average width of apreture 1.40mm. (Note: The unit rate quoted by contractor include cost of wiremesh and all other connected accessories. Net opening will be measured for payment purpose.)

S&F Aluminium alloy powder coated windows sliding track (three track), bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RM double revated and 0.55Kg/RM for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.

S & F for Aluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mm x 1.80mm, shutter top section 47.62mm x 44.45mm x 1.80mm thick, shutter bottom section 114.30mm x 44.45mm x 1.80mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 1.80mm thick & glazing clips weighing not less than 0.097 Kg/RM) including shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, door closer heavy duty “SAMRAT”, locking arrangement “GODREJ”, rubber gasket and door stopper complete all as specified and as directed.

S & F for Powder coated aluminium partition with frame of standard powder coated aluminium sections of size 101.60mm x 44.45mm x 1.80mm in vertical and horizontal members and glazed with 5.5mm thick tinted glass and 12mm thick prelaminated particle board interior grade with laminations on both faces as directed by Engr-in-Charge according to site requirement including jointing cleats, glazing pins, rubber packing and fixing accessories as per site requirement including taking down existing partition of any type complete.

M & L for Ready Mix cement concrete (RMC), 1:2:4 Type B-1 using 20mm graded stone aggregate as in Hardstanding/Pathway /pothole filling/road cutting filling /Road side berm filling and similar nature of work in any position and location duly maintaining proper slope/gradiant as required at site and using form work at sides where required including demolition of cement concrete (unreinforced) in any position not exc. 15 cm thick (below or above ground level). (Note: 1. The flooring required of various thickness as per site condition shall be also measured and paid in Cum. 2. No extrapayment shall be made for formwork used 3. Necessary vouchers of RMC from plant shall produced duly defaced by Engr-in-Charge during payment of RAR)

S & F for 6 mm thick Toughned glass fixed as in doors, windows, partitions and similar work including cutting to shape, drilling holes required icluding frosted on one side etc including dismantling of existing glass of any type complete all as specified and directed

S & F in repairs ready made floor/wall mounted Vanity box made of HDHMR board, both side laminated consisting of the following combination :- (a) Wash Hand Basin 810mm x 500mm. (b) Base Cabinet 780mm x 485mm x 460mm. (c) Side Cabinet 300mm x 250mm x 1800mm. (d) Mirror cabinet size 780mm x 160mm x 800mm. Make : Hindware - Cat Part No. 70089 or 70084. Make : Kohler : Cat Part No. K-31602IN-E63

S & F in repair aluminium dia cast door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S & F 100mm size stainless steel butt hinges fixing with screws to PVC door frame complete all as specified.

S & F Aluminum Anodised 150mm size barrel tower bolt complete all as specified and as directed.

S & F 150mm size aluminum adodised handles complete all as specified and as directed.

S & F 100mm size Mild steel butt hinges fixing with screws to Iron door frame complete all as specified.

S & F Mild steel 150mm size barrel tower bolt complete all as specified and as directed.

S & F 150mm size Mild steel handles complete all as specified and as directed.

S & F 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S & F in repairs 100mm size stainless steel butt hinges fixing with screws to PVC door frame complete all as specified.

S & F in repairs Aluminum Anodised 150mm size barrel tower bolt complete all as specified and as directed.

S & F in repairs 150mm size aluminum adodised handles complete all as specified and as directed.

S & F in repair for mild steel pressed oval type handles stove enamelled black for doors 150 mm long complete all as specified and directed.

S & F in repairs Floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring and vulcanised rubber piece fixed in floor, over all length of cover plate 140mm complete all as specified and directed.

S & F in repair for 150mm long mild steel barrel tower bolts of extruded section complete all as specified and as directed.

S & F in repairs 300 mm long aluminium alloy anodised sliding door bolt with haps, stapple ( bolt type ) and fixing clips of sheet, cast of extraded sections and fixing bolts and sliding bolts of extraded sections or cast aluminium alloy complete all as specified and directed.

S & F in repairs stainless steel Curtain Rod 25 mm dia with holders fixed to wall with finials and bracket etc complete all as specified and as directed. (Note : Damage to Brick/stone or any type of wall and existing cement plaster/pointing during fixing of curtain rod/bracket/finial shall be make good and bring back to old position to be done by the contractor and the cost for the same shall be deemed to include in the quoted rate, No extra payment will be made for brick work, re-plastering and painting to the contractor.)

S & F in removal of wire cloth from existing steel windows, providing new wire cloth and fixed with screws or rivets and provision of new flat iron beads of size 12 x 5 mm complete all as spd and directed. Note – (Removal of steel window shutter incl refixing in the same location where necessary will also included in quoted rate)

S & F in repair stainless steel wire cloth 0.36mm normal dia of wire and average with a aparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed.

Hacking out old broken glass from wooden frames and steel frame or stone, concrete or brick surrounds , glazed with putty or fixed with beads.

S & F 3 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S & F 3 mm thick figured glass , pin head type and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S & F 5 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 1 Sqm in each pane fixed complete all as specified and directed.

M & L for fabrication & fixing to horizontal & vertical shelves/ partations /sides/ top/ bottom/back sides etc for Modular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 17/18 mm thick HDHMR boards with white laminated colour on both sides, of approved quality including paste to all exposed edge by edge Banding Tape including provision of cabinet for keeping baskets/ drawers etc and including taking down existing shutter/panel/partition in any type and any position complete all as specified and as directed. (Make :Action tesa or equivalent)

M & L for Fabrication & fixing to front side /all exposed sides of Modular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 17/18 mm thick HDHMR boards with glossy/mat colour laminate sheet on front face and all exoposed sides and white laminate on other face of approved quality and including paste to all exposed edge by edge Banding Tape and including provision of cabinet for keeping baskets/ drawers etc and including taking down existing shutter/panel/partition in any type and any position complete all as specified and as directed. (Make :Action tesa or equivalent)

S & F in repair soft closure hinges with all fittings at mounting plate of premium quality, fixed in door/cup board shutters complete all as specified and as directed (Make : - Godrej/Hettich/IPSA and as approved by GE).

S & F in repairs Continuous (piano) hinges, stainless steel, width of flap 30mm complete all as specified and as directed.

S & F in repair 150 mm size designer door handel stainless steel cromimum plated for Cabinet/Wall Unit/Overhead Unit/Wardrobe etc complete all as specified and as directed.

S&F in repair mortice night latch of size 75 mm, 4 levers of mild steel etc complete all as specified and as directed.

S & F for Magnetic catches with steel body ‘H’ type, fixed to shutter, complete all as specified.

S & F in repair door Espag for uPVC door locking system including with smooth function of upvc door complete all as specified and as directed.

S & F in repairs UPVC casement door lever handles both side made of zinc alloyed (white powder coated) with complete system of Cylinder Lock,Door Barrel Lock, one side Thumbturn Knob with other side key system with 3 Standard Keys,Anti-Pick,Anti-Bump,Anti Drill,High Security for UPVC door etc complete all as specified and as directed.

S & F in repairs Cylinder Lock,Door Barrel Lock, one side Thumbturn Knob and other side key system with 3 Standard Keys,Anti-Pick,Anti-Bump,Anti Drill,High Security for UPVC door etc complete all as specified and as directed.

S & F in repairs UPVC casement door lever handles both side made of zinc alloyed (white powder coated) with one side knob and one side key system complete all as specified and as directed.

Taking down aluminium/UPVC door, window shutters with frame upto 2.5 Sqm each and refixing in same opening after necessary repair like securing glass beads, refixing of hinges, door lockes , realignment of frame fixed with fastener , bolts , screws, silicone / filler for gaps of frame etc to smooth movement of door etc complete all as specified and as directed. (Note : Cost of all fittings and fixtures required as per site shall be deemed to be included in the quoted rate of the item).

M&L 4mm thick desginer false ceiling e- board ( Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instruction, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33 mm thick galvanized steel sheet & size T-24x32 mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 2 mm dia fixed rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runner at 600 mm c/c to from 600 x 600 mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19 x19 mm of white colour all as per instructionand including dismantling of walls and celing existing old board (fibre pulp.insulation etc)or insulation boards/slabs/blanks any thickness including cover fillets , any type of frame etc. complete all as specified and directed.

S & F plain gypsum board panel 12 mm thick on false ceiling ( including any design/ cob design as required & pattern as approved by GE) with and including necessary GI frame work for seamless ceiling used with ' T ' , channel or any section including screws , cleats ,fasteners, clips and all required accessories , hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm and including dismantling of walls and celing existing old board (fibre pulp.insulation etc)or insulation boards/slabs/blanks any thickness including cover fillets etc including two coat of OBD over a coat of putty including dismantling of walls and celing existing old board (fibre pulp.insulation etc)or insulation boards/slabs/blanks any thickness including cover fillets etc. complete all as specified and directed.

M&L PVC hollow wall panelling 7 to 8 mm thick wood grain teak finished (colour and design as approved by GE) prelaminated inclusive of fixing on to wall including moulding end caps with L / U beading etc fixed with PVC sleeves and screws as required at site including dismantling of old wall panelling of any description, complete all as specified and as directed. Note : (i) Taking down existing any type of electric board sheet/ tube light/ LED / any fittings before fixing of panels and refixing the same after fixing the panels as required are included in the quoted rates by the contractor.

S & F horizontal / vertical Polyester blinds curtain for winows (colour and design as approved by GE ) with curtain rod fixing arrangements etc including dismantling of old curtians blinds of any description, complete all as specified and as directed.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 and including demolition of old brick/ PCC block masonry complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls and concrete surface of ceiling etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and fair complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and fair complete all as specified and directed.

M & L Rendering 5 mm thick on fair faces of concrete or concrete surface in ceiling in CM 1:3, finished even and fair complete all as specified and directed.

M & L for Washed stone grit plaster on exterior walls in two layers (colour and design as approved by GE), under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern (groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove) complete including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down of existing cement or cmenet lime plaster of any thickness and any description on brick or stone walls including raking out joints, hacking for key and scrubbing down woith water, complete all as specified and as directed.

S & F in repair precast cement concrete type B0 1:2:4 (12.5 mm graded aggregates) louvres and jallies, 50 mm thick ( design and patern as approved by GE) set in CM (1:4) including all mouldings but excluding frame fixed over bdy wall or walk ways or in any position etc complete all as specified and directed.

S & F precast RCC coping/post of size 600x100x50 mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size complete all as specified and directed.

M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed.

M & L for Preparation of newly plastered /unplastered surfaces of walls and ceilings and applying Two coats of Oil Bound Distemper on wall surfaces over a coat of primer ,complete all as specified and directed.

M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying One coat of Oil bound distemper complete all as specified and directed.

M & L for preparation of plastered or unplastered or brick walls or pointing surface old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying One coat of Cement Based Paint complete all as specified and directed.

M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying one coat of weather proof exterior acrylic emulsion paint premium quality of approved manufacturer, of required shade and colour as approved by GE , as per manufacturer's specification and using roller brush up to 10 Meter height complete all as directed and directed .

S & F wall paper good quality (design& colour & patern as approved by GE) including adhesive on wall etc for fixing all as specified and directed

M&L Providing and applying high quality acrylic modified resin based texture of finetex Honeycomb sand stone- 3211with anti alage and UV resistance property to be applied as in intermeadite finishes in desired pattern @ 43.04 kg/10 sqm to form film of 1 - 1.50 mm thickness after scrapping and properly cleaning the surfaces to remove loose particles from the plaster surfaces and applying coating with premium acrylic smooth exteriorpaints with Silicone additives of required shade by two or more coat @ 1.43 Ltrs/ 10 sqm over and including one coat of premium quatity primer complete all as specified and as directed by Engr- in-charge.

M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying two coat of weather proof exterior acrylic emulsion paint premium quality of approved manufacturer, of required shade and colour as approved by GE , as per manufacturer's specification and using roller brush up to 10 Meter height complete all as directed and directed .

M & L for 2 mm avg thickness water proof wall care putty on new / old any type of surface of wall/ ceiling including sand papering thus making surface even & smooth etc and prepare to receive further treatment etc, complete all as specified and directed. (Make JK Wall care, Birla and as approved by GE)

M & L for applying one coat of synthetic enamel paint including preparation of old wooden surfaces of any description over 10 cm width or girth and complete all as Specified and directed.

M & L for applying one coat of synthetic enamel paint including preparation of old steel surfaces of doors, gates,windows , grills, frames, roof trusses , vertical posts, veiw cutter sheet etc any description over 10 cm width or girth at any position and complete all as Specified and directed.

M & L for applying one coat of synthetic enamel paint through spray painting machine including preparation of old steel/AC sheet/Concrete surfaces of roof sheet , prepainted roof sheet of any patren , design , any position at any height of building and complete all as Specified and directed.

M&L two coat of synthetic enamel paint (finishing coat) over one coat of pink primer to new wood surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

M & L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

M & L for preparation of old stone, PCC kerb stone concrete surfaces of any description over 10 CM width or grith and applying one coat of synthetic enamel paint (colour and patren as per approved by GE ) including repair & prepration with wall care putty over a coat of primer complete all as specified and directed.

M & L for preparation of pathway/flooring (over Interlocking/Chequired tile surfaces) or any type of surfaces old/new or in any position and applying two coats of floor paint of superior quality etc completed all as specified and directed by Engr-in-Charge. (Make : Indigo floor paint and equivalent in Asian /Berger/ Birla as approved by GE )

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall / view cutter etc, fixed with self tapping screws with bent to a curve (of any radius as per required) including dismantling asbestos cement sheet in roof coverings (corrugated , semicorrugated etc) any gauge, thickness, including , Nainital or similar pattern roof coverings sheet in any pattern & position of roof coverings.complete all as specified and directed (Note : This item is also considered for old existing roof /wall covering partly repair with existing any type of sheet )

S & F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour as in ridges hips, vally gutter, drip and straight flashing , fixed with self tapping screws etc including dismantling asbestos cement sheet in roof coverings ( corrugated , semicorrugated etc) any gauge, thickness, including , Nainital or similar pattern roof coverings sheet in any pattern & position of roof coverings.complete all as specified and directed

Dismantling framed timber scantling in any type of frame , fillets, rails, posts, rafters, purlins, etc complete all as specified.

S&F steel work in tubular trusses,purline, doors , posts, frame works any type etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed

M&L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off from premises complete all as specified and directed

M & L Vitrified ceramic tiles (double charge) size 600 x 600 x 8 -10mm thick (square/rectangular), ( shade/ colour/ Design/ pattern as approved by GE) ,as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15 mm thick avg screed bed in CM 1:6 in floor complete all as specified and dirtected by Engr-in-Charge

M & L Vitrified ceramic tiles (double charge) size 600 x 600 x 8 -10mm thick (square/rectangular), ( shade/ colour/ Design/ pattern as approved by GE) ,as in skirting , dado , vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 10 mm thick rendering in CM 1:4 etc complete all as specified and dirtected by Engr-in-Charge

M & L Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) size 395 x 395 mm / 400 x 400 mm , in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick avg screed bed in CM 1:6 etc complete all as specified and dirtected by Engr-in-Charge

M & L Coloured Glazed ceramic tiles size 600 x 300 x 7-8 mm thick, in vertical surface such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick rendering in CM 1:4 etc complete all as specified and dirtected by Engr-in-Charge

M&L for vitrified Ceramic tiles, double charged, 8 to 10 mm thick ( shade/ colour/ Design/ pattern as approved by GE) polished /matt finished size 600mm x 1200mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick rendering in cement mortar (1:6) etc complete all as specified and dirtected by Engr-in-Charge.

M&L for vitrified Ceramic tiles, double charged, 8 to 10 mm thick ( shade/ colour/ Design/ pattern as approved by GE) polished /matt finished size 600mm X 1200mm as in skirting/dado/vertical surface etc laid over and including 10mm thick cement plaster in CM (1:4) , set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tiles etc complete all as specified and dirtected by Engr-in-Charge

Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.

M & L 75 mm thick Cement concrete work as in plinth protection type C-1 , 1:3:6 (20mm graded aggregates) with finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed

M & L for 18 to 20 mm thick granite (of any type) work( table rubbed and polished) in jambs, pillars, window cills, cooking platforms, floor , steps etc and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab over and including 15 mm thick screed bed/rendering in CM 1:4 including rounding to edge of granite as per required and including dismantling of existing granite of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 18-20mm thick over 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including rubbing and polishing including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position including demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.

M & L for Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) confirming to IS 15658-2006 of 80 mm thick, M-40 Grade laid dry in floor/path including 50 mm thick sand bedding layer after dismantling of old interlocking tiles /path etc and remove from the MoD land complete all as specified and as directed.

M & L for Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) confirming to IS 15658-2006 of 60 mm thick, M-35 Grade laid dry in floor/path including 50 mm thick sand bedding layer after dismantling of old interlocking tiles /path etc and remove from the MoD land complete all as specified and as directed. complete all as specified and as directed.

M & L for Coloured Chequered cement concrete tiles 30cm x 30cm x 20-22mm thick, set, jointed and pointed in neat cement slurry over and including 15mm thick screed bed in CM 1:6 etc including dismantling of existing chequired tiles of any type complete all as directed.

S&F in repair Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to trap , and to flushing pipe antisyphonage pipe including trap set in and including concrete etc complete including making good to floor all as specified and dirtected by Engr-in-Charge .

S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap / 'P" Trap , including seat cover with connection to drain and to flushing pipe antisyphonage pipe, and making good to floor complete all as specified and directed.

S & F in repairs Vitreous china single Piece floor mounted WC With PP Soft Close Seat Cover, Hinges, with cistern & Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set, Size: 360x730x740 mm, S Trap- 300 mm including connecetion to drain pipe with all fitting and fixture complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. SLS-WHT-6851S300PP or equivalent in Jaquar / Marc / Kohler )

S&F in reapir Vitreous China wash basin, white, flat back, size 550 x 400 mm including , chain and plug but including brackets or erecting stand including & (32 mm -45 gms/40mm-60 gms ) waste coupling of CP complete all as specified and dirtected by Engr-in-Charge .

S & F in reapir Vitreous china wash basin counter oval type size 600x425x195mm, under any type of slab with all fitting and fixture, & (32 mm -45 gms/40mm-60 gms ) waste coupling of CP complete all as specified and as directed. (Make : Jaquar / Hindw are/Parryware/cera)

S & F in repair Vitreous China Urinal, full stall type Urinal With Fixing Accessories, white and fixed complete all as specified and directed. (Make : Jaquar cat part No.URS-WHT-13261 and equivalent in jaquar / Hindware/Parryware or equivalent make as per approved make list).

S & F Rotational moulded polyethylene water storage tanks 2000 lts capacity, tripple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S & F Rotational moulded polyethylene water storage tanks 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S & F in repair 20 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed

S & F in repairs 25mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 15 mm bore complete all as specified and directed.

S & F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 15 mm bore complete all as specified and directed.

S&F steel water tubing galvanised 15mm bore medium grade fixed to walls, under floors and on ceiling surfaces , including cutting chases , pipning in making good to facings where required and pointing in Cement mortar 1:3 for concealed water tubing or conduit pipe etc and including taking up or down old steel tubing 15 mm bore and connecetions in any postion etc complete all as specified and directed.

S&F steel water tubing galvanised 20 mm bore medium grade fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing 20 mm bore and connecetions in any postion etc complete all as specified and directed.

S&F steel water tubing galvanised 25 mm bore medium grade fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing 25 mm bore and connecetions in any postion etc complete all as specified and directed.

S&F in repair 15mm quarter turn brass angle valves, chromium plated cast copper alloy, polished body screwed down, high pressure,suitable for 15mm bore steel tubing complete all as specified & directed. (Make: Jaquar/ Marc/ Kohler)

S & F in repair 15 mm bore bib tap chromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specifed and directed. (Make: Jaquar/ Marc/ Kohler)

S&F in repair 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. complete all as specifed and directed. (Make: Jaquar/ Marc/ Kohler)

S&F in repair 15 mm concealed stop valves with long shank and cup chromimum plated fancy type for iron pipe and fixed etc complete all as specified & directed. (Make: Jaquar/ Marc/ Kohler)

S&F in repair Brass CP Basin mixer central hole for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. (Make : Jaquar Continental CON-CHR-167KNB or equivalent in Marc / Kohler as approved by GE )

S&F in repair brass chromium plated wall mixture 3 in 1 system with L- bend provision for over head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed. ( Make : Jaquar Continental CON-CHR-273KNUPR or equivalent in Marc / Kohler )

S & F in repairs Fancy type sink mixer for mixing hot and cold water with swinging port, screwed for iron pipe,15mm bore complete all as specified and as directed. (Make : Jaquar/Marc/Kohler)

S & F in reapir CP shower rose fancy type 150 mm x 150mm size with 300 / 600 mm long shower arm, fixed in repair to 15mm bore pipe, complete all as specified and as directed. (Make : Jaquar/Marc/Kohler)

S&F in repairs 100 mm dia brass chromium plated shower rose with neck and swivel joints fancy type suitable for 15mm bore GI pipe etc complete all as specified and as directed. (Make : Jaquar/Marc/Kohler)

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm.

S & F in repair PVC connections 15mm size with PTMT nuts of length 600 mm.

S & F in repair Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.

S&F in repairs Hand Shower (Health Faucet) with 8 mm Dia, 1 Meter Long Flexible Tube & Wall Hook completed all as specified Make : Jaquar Cat part No. ALD-CHR-573 (Make : Jaquar cat part No HSH CHR 1657 or equivalent in Marc / Kohler as approved by GE)

S & F in repair Stainless steel Grating dome 100/ 125mm dia with or without hole for waste pipe complete all as specified and as directed.

S&F in repairs of CP towel rail 600mm long fixed with and including chromium plated brass screws and and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified. (Make: Jaquar/ Marc/ Kohler)

S&F in repairs 32mm size waste fitting (coupling) brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.

S&F in repairs of 32mm brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, unions and cap and fixed, complete all as specified and directed.

S & F 32/40mm spring type PVC waste pipe fixed toWHB and sink (Note minimum length of each pipe should not be less than 0.80RM), fixed in repairs, complete all as specified and as directed.

S&F in repair 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket & flushing pipe etc complete all as specified and directed

S & F in repair flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for IWC & EWC etc complete all as specified and directed.

S & F in repairs Polyethelene syphon kit assembly (Cascade Type Floor Mounted as required) for flushing cistern, complete all as specified and as directed.

S & F in repair flushing cistern handle complete all as specified and directed

S & F in repairs 15 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm-210gms/25mm-455gms complete all as specified and directed. (Make: Prayag/ Symet/ Prince/ Polytuf)

S & F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm-210gms/25mm-455gms complete all as specified and directed. (Make: Prayag/ Symet/ Prince/ Polytuf)

S & F in repairs 25 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm-210gms/25mm-455gms complete all as specified and directed. (Make: Prayag/ Symet/ Prince/ Polytuf)

S&F in repairs 15mm PTMT Pillar taps cast copper alloy fancy type chromium plated with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe of 15 mm bore (Minimum weight 15mm-90gms) complete all as specified and directed. (Make: Prayag/ Symet/ Prince/ Polytuf)

S & F in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (Make: Prayag/ Symet/ Prince/ Polytuf)

S & F in repairs Angle cock of PTMT any colour high pressure screwed for iron pipe 15mm bore and fixed, (Minimum weight 15mm-90gms) complete all as specified and as directed. (Make: Prayag/ Symet/ Prince/ Polytuf)

S & F in repair 15mm galvanised iron medium grade short fittings such as Socket, Elbow, Nipple, Tee, Tee Reducer, Elbow Reducer, Union, double nipple etc (ISI marked) complete all as specified and directed.

S & F in repair 20mm galvanised iron medium grade short fittings such as Socket, Elbow, Nipple, Tee, Tee Reducer, Elbow Reducer, Union, double nipple etc (ISI marked) complete all as specified and directed.

S & F in repair 100 /110 mm dia PVC floor trap , with SS grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S & F in repair 75 mm dia PVC floor trap , with SS grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S & F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor or in wall completed all as specified and directed

S & F repair 110 mm PVC (SWR) bends with acess door completed all as specified and directed

S&F repair 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints ,laid in trenches or in floor or in wall complete all as specifed and directed.

S & F in repair 75 mm dia PVC cowls

S & F in repair 110 mm dia PVC cowls

S & F repair 75 mm PVC (SWR) bends with acess door completed all as specified and directed

S&F Precast SFRC square or rectangular manhole covers 75 mm thick with frame medium duty conforming to IS-12592 including demolition of existing slab covers, including necessary reinfocement, complete all as specified and as directed.

Cleaning old sewage lines & dia and cleaning of water with sludge from soakage wells with Mechanically operated 25 tonne truck mounted desludger with 12000Ltr capacity tanker having water fitted high pressure jet machine for cleaning and desludging of sewage line, soak wells, septic tanks etc., shall be used by the contractor as per scheduled programme in writing and completion of each job to the entire satisfaction of Engineer-in-Charge as instructed. (Note : (a) In case contractor fails to deploy the machine as per scheduled programme a recovery of Rs 1000/- per day shall be deducted from his payment. (b) Per day means 8 working Hrs in a day excluding standby period due to any reason.)

Taking down carefully copper/aluminium point wiring with or without conduit (light, fan, socket or power) complete, excluding any type of light fittings and fixture and making good to the disturbed surface of walls, floors roof etc all as specified and directed. (Note : Light fittings of any type and size including fixture such as switches, ceiling roses, pendents, regulators, sockets, etc of taken down/ dismantled if any alongwith point wiring shall be measured and paid separately as supply & fixing in repair under relevent item of this BoQ and credit for the same has been taken in Sch of Credit)

Material and labour of point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated sheathed and multistranded copper conductor cable ISI marked and including PVC conduit ISI marked of size 20 mm dia medium grade and fittings such as tees, bends, elbow, and FRLS PVC insulated unsheathed 1.5 Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly including Metal Flush Box, Cover plate with frame complete and cutting chases & making good in CM 1:3 to match with existing surface all as directed.

(a) One light point/ fan point/ bell point controlled by one switch

(b) One socket outlet 5 Amps controlled by one switch on same board

(c) One socket outlet 5 amps controlled by one switch on independent board

All as per item No.157 here in before but wiring with 2.5sqmm copper wire and 2.5sqmm earth wire for socket out let on independent board.

M&L for point wiring with single core fire retardant low smoke PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) connected to common earth dolly and drawing through existing surface/concealed conduit pipe and in existing MS box/modular box covered with existing hylem sheet / modular plate (top cover) for mounting switches, sockets or fan regulators etc for the following :-

(a) One light point/ fan point/ bell point controlled by one switch

(b) One socket outlet 5 Amps controlled by one switch on same board

(c) One socket outlet 5 amps controlled by one switch on independent board

All as per item No.162 here in before but wiring with 2.5sqmm copper wire and 2.5sqmm earth wire for socket out let on independent board.

S & F in replacement of switch piano flush type 5 Amps SP one way all as specified.

S & F in replacement of switch piano type 15 Amps SP one way all as specified.

S & F in replacement of socket outlet 2-in-1,5 Amps flush type 3 pin 5 Amps multi purpose all as specified.

S & F in replacement of socket outlet 2 in 1 (multipurpose) 3 pin 5 and 15 Amps flush mounted type all as specified.

S&F in replacement modular switch flush type, 6 amps one way,SP,230 volts AC all as directed.

S&F in replacement modular switch flush type, 16 amps one way,SP,230 volts AC all as directed.

S&F in replacement modular switch bell push flush type, 6 amps one way,SP,230 volts AC all as directed.

S&F in replacement modular socket outlet 6 amps 5 pin 2 module all as directed.

S&F in replacement modular socket outlet 6 & 16 amps 6 pin multipurpose combined 2 module all as directed.

S&F in replacement modular Step Fan regulator, 120 watts single / double module all as directed.

S&F in replacement ceiling rose surface bakelite65 x50mm with two to threeterminals.

S & F in replacement of lamp holder bakelite insulated body with back plate suitable for batten fitting all as specified.

M & L in replacment of fan regulator stepped electronic flush type suitable for 1200/1400 mm sweep fan as per existing pattern.

M & L in replacement of Bell ding dong AC, 230 volts single pole all as specified. Make :- Cona/ Anchor/SSK

M & L in replacement of MCCB, 4 Pole, 100 Amps, 16 KA, AC ,415V including spreader and electric connection complete all as specified and as directed

M & L in replacement of MCCB, 4 Pole, 125 Amps, 16 KA, AC ,415V including spreader and electric connection complete all as specified and as directed

M & L in replacement of MCCB, 4 Pole, 160 Amps, 16 KA, AC ,415V including spreader and electric connection complete all as specified and as directed

M & L in replacement of MCCB, 4 Pole, 200 Amps, 16 KA, AC ,415V including spreader and electric connection complete all as specified and as directed

M & L in replacement of MCCB, 4 Pole, 250 Amps, 16 KA, AC ,415V including spreader and electric connection complete all as specified and as directed

S&F of MCB DB conforming to IP 43 - IK 09 with single door, SPN 04 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces.

S&F of MCB DB conforming to IP 43 - IK 09 with single door, SPN 08 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces.

Material and labour for replacement of submain wiring complete with 2 x 6.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 6 sqmm (same specification ) as earth wire in existing PVC conduit complete all as directed

Material and labour for replacement of submain wiring complete with 2 x 4.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 4 sqmm( same specification ) as earth wire in existing PVC conduit complete all as directed

Earthing complete with galvanised steel plate electrode 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level , connected to and including galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, washers protected by and including 15 mm bore GI Pipe “light grade” and connected to main test point as directed and including concrete pit in PCC(1:3:6) type C1 precast RCC M-25 (design mix) precast cover slab (54 x 54 x 5 cm) duly reinforced with and including 8 mm dia TMT steel bars @ 150 mm C/C both way, one lifting handle made of 8 mm dia TMT bar embedded in precast cover slab, funnel, wire mesh, 20 mm bore GI medium grade pipe for watering, charcoal and salt in alternate layers, including necessary excavation and earth work any type of soil complete all as specified and shown in electrical plate No. 5 of SSR Part –I including testing on completion complete all as specified and directed.

Supply & Laid in trenches in replacement of LT UG XLPE cable 10 sqmm 2 core 1100 volts grade armoured with aluminium conductor ISI marked all as specified and directed by the Engr-in-charge.

Supply & Laid in trenches in replacement of LT UG XLPE cable 16 sqmm 2 core 1100 volts grade armoured with aluminium conductor ISI marked all as specified and directed by the Engr-in-charge.

Excavation in trenches in loose/soft soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep and getting out including forming bottom surface for laying LT cable as specified and directed at site by Engineer-in-Charge.

Returning filling in soil including spreading, levelling, watering and well rammingin layers not exceeding 25 cm complete as specified and directed by the Engr-in-charge.

Removing exccavated soil not exceeding 50 mtr and depositing wheredirected at a level not exceeding 1.5 mtr above the starting point, complete.

M&L for sand cushioning to under ground cable provided with layers of snad(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed at site by Engineer-in-Charge.

Supply and laying burnt bricks class - B for profection of cable complete all asspecified and directed at site.

M & L in replacement of MCB SP 10 to 32 Amps,230V, 10 KA C curve all as specified

M & L in replacement of Isolator SPN 40 Amps, 240 volts as specified

M & L in replacement of Isolator SPN 63 Amps, 240 volts as specified

M & L in replacement of single pole and neutral metal clad sheet steel enclosures with 2 pin and earth plug and socket complete with MCB SP 20 Amps.Make :-Havells//ABB/HPL

Supply & Fixing of Mirror light fitting, 10 watt 230 V, with all aceessories internally pre-wired and incld connecting up with twin core twisted flexible copper conductor cable with suitable size I all as specified.

S&F in replacement LED tube light fitting 20 W LED T/L fitting complete for recess mounting and making all electric connection all as specified and directed .

S & F in replacement of energy efficient LED fittings 45W LED suitable for building security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed.

Supply and fixing in replacement of street light fitting bracket, 1.0 mtr long made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

S&F in replacement of LED bulbs 9W, B 22/E14/E27 90-300V AC-50 Hz complete all as directed. Make: Sysks/Havells/Philips

S&F in replacement of bulk head fitting 6.5 W with PMMA diffuser complete all as specified and directed.

Taking down ceiling/exhaust fan any sweep, sealing cable end, dismentling blade and refixing including electric connection complete all as directed.

Material and labour rewinding of ceiling fan 1200mm sweep any make and type with copper wire of suitable gauge including provn of cut paper/varnishing all as required complete all as directed.

M&L for rewinding of exhaust fan(380/450mm) with super enamelled copper wire of required size duly varnishing including greasing/oiling and commissioning/testing to the entire satisfaction of Engineer-in-charge.

M&L for rewinding of exhaust fan 300mm with super enamelled copper wire of required size duly varnishing including greasing/oiling and commissioning/testing to the entire satisfaction of Engineer-in-charge.

S & F in replacement plastic body capacitor of capacity 2.5 mfd with wire suitable for single phase motor and making connection complete all as specified and directed

S & F in replacement plastic body capacitor of capacity 3.15 mfd with wire suitable for single phase motor and making connection complete all as specified and directed

S & F in replacement plastic body capacitor of capacity 4 mfd with wire suitable for single phase motor and making connection complete all as specified and directed

S&F in replacement of ball bearing No 6201/6202 suitable for ceiling fan complete all as specified and directed.

M & L in replacement plug top, 3 pin 10/20 Amp earth metal clad (ISI marked as directed (Make : MDS/Legrand/Havells).

M & L in replacement socket 3 pin 10/20 Amp earth metal clad (ISI marked as directed (Make : MDS/Legrand/Havells).

M & L in replacement sheet Bakelite (Hylam) 3 mm thick cut to size including cutting of sheet for fixing switch/socket required including fixing of switch/socket and making connection etc complete all as specified and as directed

M&L in replacement pressed steel terminal boxes sunked for mounting switches/ socket, fan regulator, etc. size of box retangular 75 x 75 x 60 mm.

M&L in replacement pressed steel terminal boxes sunked for mounting switches/ socket, fan regulator, etc. size of box retangular 175 x 100 x 60 mm.

M&L in replacement pressed steel terminal boxes sunked for mounting switches/ socket, fan regulator, etc. size of box retangular 250 x 300 x 60 mm.

Supply only cable PVC insulated copper conductor two core PVC sheathed circular 1.5 sqmm for temperary electrification in shamiana and security metal detectors and signal equipments complete all as specified and as directed.

Supply only cable PVC insulated copper conductor two core PVC sheathed circular 2.5 sqmm for temperary electrification in shamiana and security metal detectors and signal equipments complete all as specified and as directed.

Supply only service cable PVC insulated aluminium conductor two core PVC sheathed circular 6 sqmm for temperary electrification in shamiana and security metal detectors and signal equipments complete all as specified and as directed.

Supply only service cable PVC insulated aluminium conductor two core PVC sheathed circular 10 sqmm for temperary electrification in shamiana and security metal detectors and signal equipments complete all as specified and as directed.

Supply only polycarbonate extension board comprising of the following items for temporary electrification in shamiana and security metal detectors and signal equipments complete including connected with suitable size of cable all as directed by Engr-in-charge:- a) Switch P/T 15 Amp - 1 Nos. b) Socket outlet 6/16 amps - 1 Nos

Attending internal electric complaint round the clock including providing small pieces of wires, tapes, machine screws, cup washers, fuse wire, thimbles, clamps for making the internal supply functional complete all as specified and as directed. Notes:- 1. Necessary T&P, saftety equipments and ladder required to attend the complaint shall be provided by the contractor. 2. Any other other requirement shall be met from "supply only" items in the schedule above.

Supply and fixing in replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB complete all as directed.

S GOURAV PRAKASH ENTERPRISES (BID ID -3100830)

M/s Shubh Enterprises (BID ID -3099806)

aggarwal engineers contractors (BID ID -3119656)

garnet engineers contractors (BID ID -3099685)

M P TYAGI ENGINEERS AND CONTRACTORS (BID ID -3098336)

LAXMI GROUP (BID ID -3116920)

tarun construction co (BID ID -3104249)

V M CONSTRUCTION (BID ID -3100461)