Balance work for Construction of Polytechnic at Karihama Kupwara

Amount

Centring and shuttering including strutting, propping etc. and removal of form work for

Foundations, footings, bases of columns etc. for mass concrete

Suspended floors, roofs, landings, balconies and access platforms.

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, pillars, piers, abutments, posts and struts

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete jobs above plinth level. Thermo Mechanically Treated bars of grade Fe 500D or more of approved quality and manufacture(SAIL, Tata Tiscon make or any other brand/make which are approved by CPWD and Indian Railway) including carriage of materials. Note:-Out of the total advertised quantity of 52131.00 kg TMT steel bars of sorts in item no. 2, departmental supply is available about 3100.00 kg which shall be used by the successful bidder as per drawing from the consultant and the cost of the same departmental material shall be deducted from the bill of the successful bidder at the rate of Rs 60.00 per kg

Reinforced cement concrete work in walls (any thickness) , including attached pilasters buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor –v level including curing but excluding cost of centring and shuttering. 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams , suspended floors, roofs having slope up to 15%, landing, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases, spiral stair cases upto floor –v level including curing but excluding cost of centring and shuttering, finishing and reinforcement 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size )

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of cantering, shuttering, finishing and reinforcement. All works upto plinth level.

1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).all

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering and finishing 1: 4: 8 (1cement : 4 coarse sand :8 graded stone aggregates 40mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering and finishing 1: 3: 6(1cement : 3 coarse sand :6 graded stone aggregates 20mm/40mm nominal size)

Providing and laying dry stone soling including ramming, watering and carriage of material from source to site of work-complete job

Providing and filling nallah muck including ramming, watering and carriage of material from source to site of work-complete job.

Making plinth protection 50mm thick of cement concrete!:3:6 (1cement : 3 coarse sand :6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballasts/stone soling 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1 cement :6 sand)

Extra for brickwork in superstructure above plinth level up to floor –V level.

Providing woodwork in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast or with dash fastener of required dia. and length (hold fast or with dash fastener shall be paid for separately). 2nd class deodar wood

Labour charge for fixing doors, windows and ventilator frames including levelling. Plumbing etc. but excluding cost of hold fasts (departmental supply)

Providing and fixing of 40x5mm flat iron hold fasts 40cm long to frames of doors ,windows and ventilators including embedding in cement concrete block 30x10x15cm 1:3:6 mix (1cement:3 coarse sand:6 graded stone aggregates 20 mm nominal size)

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows including fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately , all complete as per direction of Engineer-in –in charge. Including cost of butt hinges of standard quality- 1st class kail wood.

Providing and fixing panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters of 12mm thick board with decorative lamination on both sides, Grade 1, Type II IS: 12823 marked. Prelaminated particle board.

Providing and fixing 35 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4mm in both directions with wire of dia 0.63 mm for doors windows and clerestory windows with ISI marked M.S pressed butt hinges bright finished of required size with necessary screws, as per direction of Engineer-in –in charge. 1st class kail wood

Providing and fixing of 4mm thick float glass panes ( weighing not less than 10 kg/Sqm ) including cost of beading and nails

Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of approved steel primer complete including carriage of materials. (SAIL, Tata Tiscon make or any other brand/make which are approved by CPWD and Indian Railway). Note:-Out of the total advertised quantity of 82215.70 kg of structural steel of different sections in item no. 20, departmental supply is available about 9530.00 kg which shall be used by the successful bidder as per drawing from the consultant and the cost of the same departmental material shall be deducted from the bill of the successful bidder at the rate of Rs 64.00 per kg

Providing and fixing colour precoated (high ribbed) galvanized iron profile sheet (size, shape and pitch of corrugation as approved by engineer -in-charge 0.50mm(0.05%)per Sqm as per IS277, in 240mpa steel grade 5-7microns epoxy primer on both side of the sheet and polyester top coat 15-18micron sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation. The sheet shall be fixed using self-drilling, self-lapping screw of size(5.5.×55mm)with EPDM seal or polymer coated J& L hooks bolt and nuts 8mm dia. limpet washers, complete up to any pitch in horizontal/Vertical or curved surfaces, excluding the cost of purlin,raftars and trusses and including cutting to size and shape wherever required and carriage of materials. (Tata/Jindal or equivalent make).

Providing ridges & hips/valley of width 60cm/90cm plain colour coated G.S. sheets fixed with polymer coated J & L hooks bolts and nuts 8 mm dia. limpet washers using 0.50 mm thick G.S plain sheets .

Providing and fixing 16mm dia. holding down anchor bolts 500mm long along with nuts for holding of steel trusses /frames in roof of the building.

Providing & fixing plained eaves boarding of 2nd class kail wood of size 300 x 40 mm (nominal size).

Providing wood work in frames of false ceiling, partition etc. sawn and fixed in position using Budloo wood.

Providing & fixing 20 mm thick wooden plank ceiling for soffits (frame work for base to be paid for separate) with M.S screws using Budloo wood.

Providing and laying vitrified floor tiles in different sizes (minimum thickness of tiles 9.50mm with tolerance ±0.50mm ) with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colour and shades laid on 20mm thick cement mortar 1:4(1cement:4coarse sand ) including grouting the joints with white cement and matching pigments etc. complete including carriage of materials. (size of tiles 600x600 mm)

Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing, curing and carriage complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :

Cement sand plaster on rough/fair side on Brick masonry walls brick wall using cement sand mortar 1:6 mix.

Cement concrete flooring 1:2:4(1cement:2 coarse sand:4 stone aggregate 20mm nominal size) finished with floating coat of neat cement including cement slurry and curing complete 50 mm thick.

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the work complete including disposal of rubbish to the dumping ground within 50 meters lead with cement mortar 1:4 (1 cenent: 4 fine sand)

Distempering with oil bound washable distemper of approved brand & manufacture two or more coats of required shading incl. priming coat with cement primer to give an even shade.

Finishing walls with water proofing cement paint of approved brand and manufacture of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Applying primer coat with ready mix pink or grey primer of approved brand and manufacture on wood work(NEROLAC/ASIAN PAINT/BERGER brand and or of equivalent make to the satisfaction of Engineer Incharge )

Painting with synthetic enamel paint of approved brand and manufacture for wood work including cost of priming coat (NEROLAC/ASIAN PAINT/BERGER brand and or of equivalent make to the satisfaction of Engineer Incharge )

Providing & applying Cement Based putty of 2mm thickness of approved brand and manufacture(Birla putty/Tata putty/J&k wall putty original manufacturer, commercial packing to be approved by Engineer-in –charge) over plastered surface to prepare the surface even & smooth complete including carriage of materials.

Removing deteriorated cement based wall putty and like by scraping and sand papering and preparing the surface smooth including necessary repairs by applying 1mm cement based putty of approved brand and manufacture to make the surface even and smooth.

Providing and laying Ceramic glazed floor tiles 300x300 mm (minimum thickness of tiles 9.50mm with tolerance ±0.50mm ) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. in coliur such as white, lvory, Grey, Fume Red Brown and including carriage of materials.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (minimum thickness of tiles 6.50mm with tolerance ±0.50mm ) of approved make in all colours , shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1 : 3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of materials.

Providing fixing aluminium tower bolts ISI marked (anodised anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1866) transparent or dyed to required colour and shade with necessary screws etc.

Providing and fixing aluminium sliding door bolts (al-drops) ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

125mm hanging door stopper

Providing and fixing aluminium window stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1866) transparent or dyed to required colour and shade with necessary screws etc. 125mm

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete incuding carriage of materials. Fixed to openings / wooden frames.

Providing and fixing 16mm thick gang saw cut mirror polished premoulded and pre polished machine cut for wall lining, kitchen platform, vanity counters, window sills , facial and similar locations of required size, approved shade , colour and texture back filled with a grout of 12mm thick average in cement mortar 1:3 (1cement:3coarse sand) joints treated with white cement mixed with machine pigments, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all level including carriage of materials. Granite of any colour or shade (Area of slab over 0.5 sqm)

Providing and fixing 16mm thick marble/granite gang saw cut mirror polished premoulded and pre polished machine cut of thickness 10mm for wall lining back filled with a grout of 12mm thick average in cement mortar 1:3 (1cement:3coarse sand) joints treated with white cement mixed with machine pigments, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all level. including carriage of materials. Granite of any colour or shade (Area of slab over 0.5 sqm)

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 in gratings, treads, landings etc of stair cases including use of chequered plate wherever required, all complete. 10.25.2 in gratings, frames, guard bar, ladder, raillings, brackets, gates . (for ornamental gates) and including carriage of materials.

Providing and fixing of stainless steel(grade 304) railing made up of standard quality Hollow tubes channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless nuts and bolts complete including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of the waist slab with suitable arrangement as per approval of Engineer-in-charge and including carriage of materials. Complete job.

Providing and fixing of stainless steel vertical posts(Newel) of required size and standard quality including all necessary fittings etc. complete job

Providing and d fixing wooden moulded corner beading of size 50x50 mm (base and height) of triangular shape to the junction of panelling/ceiling etc. with iron screws. Plugs and priming coat on unexposed surface etc. complete 2nd class teak wood

Supplying, filling local earth in layers for levelling of ground including breaking clods, watering, ramming each layer with ½ tonne roller, or wooden or steel rammer and top most layer with power roller of minimum 8.0 tonne and dressing up and including carriage of material from source to site of work and including royalty . all complete.

Supplying , stacking and spreading of good earth at sitein required thickness breaking clods, watering, ramming and dressing up and carriage of good earth from source to site of work and including royalty .all complete.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil

Earth work in bulk excavation by mechanical means over areas exceeding 30cm in depth, 1.5m in width as well as 10 sqm 0n plan ) including disposal of excavated earth lead up to 50metres and lift up to 1.5metres as directed by Engineer-in-charge

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material : All kinds of soil :

Dry Random rubble masonary with hard stones in foundation and plinth using quarry stones including cost of bond stones and including carriage of stones from source to site of work.

Extra for random rubble masonary with hard stone curved on plain for a mean radius not exceeding 6m

Carriage of materials :-

Bricks from approved brick kiln of Budgam to site of work including loading, unloading and all taxes Note:- Rates to be quoted in per 1000 nos. of bricks

Stone aggregates of sorts from approved source to site of work including loading, unloading and all taxes

Sand from approved source to site of work including loading, unloading and all taxes.

Stone from approved source to site of work including loading, unloading and all taxes.

Note:- 1) Out of the total advertised quantity of 1137.80 cum of stone aggregates of sorts in item no. 59b, departmental supply of about 25.00 cum is available at the site which shall be used by the successful bidder and the cost of the same departmental material shall be deducted from the bill of the successful bidder at the rate of Rs 1450.00 per cum. 2) Departmental supply of about 4800.00 nos.of Bricks are available at the site which shall be used by the successful bidder and the cost of the same departmental material shall be deducted from the bill of the successful bidder at the rate of Rs 10.00 per no.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaftwith brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover

Providing and fixing ball bearing for rolling shutters.

Providing and laying 50mm thick coping with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size )

Preparation of subgrade by excavating earth to an average of 22.5cm depth, dressing to camber and consolidation with road roller of 8-12 tonne capacity including making good the undulation etc. and disposal of surplus earth up to 50 meters.

Providing and laying of GSB filling including carriage of material from source to site of work and rolling with 8-10 ton road roller.

Providing and Laying water bound macadam with specified stone aggregate, stone screening and binding material including screening, sorting, spreading to template and consolidation with power road roller of 8 to 10 tonne capacity etc. complete including stacking of stone aggregate, screenings, kankar, moorum and red bajri etc. Including cost of screening and binding material and including carriage of material from source to site of work. complete job

63 mm to 45 mm DN (75mm)

53 mm to 22.4mm DN (75mm)

Providing and applying tack coat using hot straight run bitumen of VG-10 grade including heating the bitumen spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler , cleaning and preparing the existing road surface to remove all the dust and mud etc. and finally brooming the surface as per reqd. specification. (on WBM surface @ 0.75 kg/sqm)

Providing and laying bituminous macadam using crushed stone aggregate of specified grading premixed with bituminous binder transported to site by tippers laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled , vibratory and tandom roller as per specification and direction of Engineer-in charge 50mm average compacted thickness with bitumen of grade VG-30 @ 3.5% (percentage by weight of total mix ) prepared in batch type Hot Mix Plant of 100-120 TPH capacity.

Providing and laying 25mm thick semidense Bituminous Concrete along with seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg. of bitumen of grade 80/100 and binding surface with 0.90 cum of stone aggregate of 6.7mm size (Passing 11.2mm sieve and retained on 2.36 mm sieve) per 100 sqm of road surface including rolling and finishing with power road roller all complete.

Providing and laying matt finished vitrified tile of specified size having water absorption less than 0.55and conforming to IS:15622 of approved make in all colours and shades in outdoor floor such as footpath, courtyard multi models etc. laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand ) in all shapes and pattern including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in –charge and including carriage of all materials. ( 300x300x9.8mm)

Sanitary and plumbing works

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (HINDWARE/PARRYWARE/CERA or equivalent make)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. (HINDWARE/PARRYWARE/CERA or equivalent make)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 liter white P.V.C automatic flushing cistern. (HINDWARE/PARRYWARE/CERA or equivalent make)

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.( HINDWARE/ PARRYWARE/ CERA or equivalent make)

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing counter wash basin with 15mm c.p. brass pillar taps, 32mm c.p brass waste pipes of standard patterns including cutting the counter to required shape and size and fixing counter basin –complete. White vitreous china round basin size 405x355mm with a pair of 15mm c.p brass pillar taps. (HINDWARE/ PARRYWARE/ CERA or equivalent make)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required

Providing and fixing of toilet seat Elevator fitted with padded handles (For bathrooms to be used by physically handicapped person)

Providing and fixing grab bars tabular/oval in sections 30 mm to 40mm to be provided along walls leading to bathrooms for handicapped

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms

Providing and fixing toilet paper holder C.P. brass

Providing/laying and fixing following B-Type PVC soil waste, water waste and vent. Pipes etc. (Prince/Supreme/Finolex or equivalent make) including excavation, cutting and making good the walls.

150mm dia.

100mm dia.

75mm dia.

Providing and fixing following B-Type PVC fittings etc. (Prince/Supreme/Finolex or equivalent make)

150mm dia collars

100mm dia. collars

75mm dia. collars

100mm dia. Door bend

100mm dia. Door Tee

75mm dia. Door Tee

75mm dia. Floor trap

Perforated end caps 100/75 mm dia.

PVC reducers of different diameters

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall: (JINDAL/PRAKASH SURYA or equivalent make)

15 mm dia. nominal bore

20 mm dia. nominal

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) : (JINDAL/PRAKASH SURYA or equivalent make)

20 mm dia. nominal bore

25 mm dia. nominal bore

65 mm dia. nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore

Providing and fixing brass stop cock of approved quality.

15 mm nominal bore

20 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

25 mm nominal bore

65 mm nominal bore

Providing and fixing PVC connecting pipes of standard/ approved quality. 60cm long 15mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

Cutting holes up to 30x30 cm in walls including making good the same: with common burnt clay(non-modular ) bricks. With common burnt clay (non modular) bricks

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. With cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms (jaquar/Parko/Cere or equivalent make.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 (JAQUAR/PARKO/CERA or equivalent make)

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm)of approved make and quality as per direction of Engineer-in charge (JAQUAR/ PARKO/ CERA or equivalent make)

Providing and fixing 15 mm nominal bore of standard type C.P. Brass basin mixer and wall mixer of approved quality and make, weighing not less than 1.970 kg. (JAQUAR /PARKO /CERA or equivalent make)

Basin mixer

Wall mixer

Providing and fixing PTMT grating of approved quality and colour. 150 mm nominal size square 100 mm diameter of the inner hinged round grating (JAQUAR/PARKO/CERA or equivalent make)

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls. 15mm nominal bore, 105mm long, weighing not less than138gms. (JAQUAR/ PARKO /CERA or equivalent make)

Providing and fixing standard quality make Health Faucet with holder (JAQUAR/ PARKO/ CERA or equivalent make)

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete of standard quality and make.

15 mm nominal bore

20 mm nominal bore

Providing and placing on terrace (at all floor levels) or in ground polyethylene water storage tank ISI : 12701 marked, colour of opaque white or as approved by Engineer-in-charge with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (SINTEX /ELECTROPLAST /STAR or equivalent make having ISI license and Anti-bacterial )

Providing, installation and testing of water heater geysers of approved quality and manufacture (Venus/Bajaj/Racold or equivalent make ) mounted on bolts, well anchored in walls and connected with hot and cold G.I/PVC connections with superior angle valves as required-50 litre capacity

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement: 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III): 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight ofcover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :(C.I covers should be of standard quality SIRF/MFK/BIC make.

Inside size 90x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) ::(C.I covers should be of standard quality SIRF/MFK/BIC make). With common burnt clay FPS (NON-Modular) bricks of class designation 7.5

Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I.cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete asper standard design :

a) Inside dimensions 500x700 mm and 45 cm deep for single pipe line with one or two inlets

Providing and fixing cast iron manhole cover including frame of same material(C.I covers should be of standard quality SIRF/MFK/BIC make

Supplying and fixing submersible water pump of 2HP of standard quality and approved make including cost of fitting and required accessories and stabilizer of required capacity-complete job

Providing and fixing pvc conduits 40mm dia. including all fixtures (Anchor, polycab or equivalent)

Supply, erection, testing &commissioning of slow motion sequence fountain (SMSF001)

Specification:

The fountain comprises one columnar jet made from brass chrome plated with 12 nos plain bore brass chrome plated nozzles, columnar jet surrounded by 1.22m dia and 1.52m dia ring made from non-corrosive extruded aluminium alloy. 30 nos brass chrome plated ball joint nozzle fitted on 1.2m dia ring and 40 nos brass chrome plated ball joint nozzle fitted on 1.52m dia ring. Necessary galvanized steel manifold, mounting stands, distribution pipe work , gun metal balancing valves, etc.

3x1hp mono submersible pump sets, with steel mounting frame, grouting bolts, stainless steel suction screen on pump suction 3 core flat copper conductor flexible cable of size not less than 1,5 sqmm.

Pump casing cast iron

Impeller : cast iron

Shaft: steel

Motor casing: cast iron

Suction screen: stainless steel

Light:

12 x WPL 80 220v 120w PAR lights.

Light body and cover ring made from die cast aluminium alloy with epoxy polyesters coating, all external nuts, bolts and studs of AISI 304 are made of stainless steel. Polyimide cable glands, plastic. Toughened glasses sealed by double gasket system. High quality elastomer gasket. Imported coloured film filter fitted in between two Toughened glasses in sandwich construction to protect the filter against damage and dirt., also for easy cleaning. 2 core pvc flexible copper conductor double insulated of size not less than 1.5sq

Note:Execution of above Items shall be as per the instructions of the Engineer Incharge of the work site and quantities shall be paid as per actual/as per working drawings issued by the Consultant.For any inquiry contact Mobile number 9419052001

Reyaz Ahmad Mir