PROVN OF TOILET FOOTPATH FOR MD ACCN GEYSER AND EXHAUST FAN AND SPL REP TO BLDG NO P37 OR LINES UNDER GE NARANGI

Amount

Excavation in trenches n.exc 1.5m wide and not exceeding 1.5 m in depth for foundation etc, or for shafts, wells, cess pits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft / loose soil etc complete all as specified and as directed.

M&L surface dressing not exceeding 15 cm deep and complete all as specified and directed.

Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each in soft / loose soil etc complete all as specified and as directed.

Removing of surplus excavated material not exc 50m and depositing where directed at a level n. exc 1.5 m above the starting point etc complete all as specified and as directed.

M&L for hardcore of broken or boulders of gauge not exceeding 63mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc complete all as specified and as directed.

M/L PCC 1:3:6 type C-2 ( 40mm graded aggregate) as in concrete bed to drain pipe 150 mm dia including packing under , and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M & L Precast RCC1:2:4 Type B-1 ( Using 20mm graded stone aggregate) as in landings, cover slabs ( for manhole etc) chullah hoods, chajjas , water toughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.

M&L PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) in foundation filliing and mass concrete complete all as specified and as directed.

M&L PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) in coping/benching including form work complete all as specified and as directed.

M&L for RCC 1:1½:3 type A1(20mm graded stone aggregate) nominal mix as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete etc complete all as directed.

M&L for RCC 1:1½:3 type A1(20mm graded stone aggregate) nominal mix as in Columns, pillars, piers, posts and struts etc.complete all as specified as directed.

M&L for RCC 1:1½:3 type A1(20mm graded stone aggregate) nominal mix as in beams, seimic bands, cantilevers, bressumers and lintels complete all as specified as directed.

M&L RCC 1:1½:3 type A1(20mm graded stone aggregate) nominal mix as in slabs supported on walls , beams and columns in floors, roofs, landings, balconies, casnopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified as directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works, not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified as directed.

M&L TMT steel bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for mild steel TMT bars 6 mm dia and over upto and including 8mm dia cut to length, bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia as in stirrups, spacers and binders complete all as specified and as directed.

M&L Formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified as directed.

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exc. 6m mean radius and built in CM 1:6 etc complete all as specified as directed.

M & L for half brick work with sub class 'B' bricks old size (locally available best quality) straight or curved on plan to any radius, built in cement mortar 1:4 complete all as specified and as directed.

Taking down chowkats with shutters including builders hardware(without taking off shutters from the frame) area n.exc. 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames area exceeding 1.5 Sqm but not exceeding 4 Sqm each including shutter with builders hardware (without taking off shutters from the frame) complete all as specified and as directed.

M&L for 1.25mm thick mild steel pressed steel frames of size 125x60mm for doors with single rebates including necessary fixing lugs, hinges, lock strike plate,with filling of hollow portion of the frame with PCC 1:3:6 tipe C-1 etc complete all as specified and directed.

M&L for 1.25mm thick mild steel pressed steel frames of size 105x60mm for doors with single rebates including necessary fixing lugs, hinges, lock strike plate with filling of hollow portion of the frame with PCC 1:3:6 tipe C-1, etc complete all as specified and directed.

S&F 30mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and directed.

S & F 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with out sash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and as directed.

S&F aluminium anodised sliding glazed window shutter ( double leaf glazed shutter and single leaf mosquito proof shutter each in single frame work) without sash bars with anodised aluminium shutter of section 40mmX20mmX1.10mm thick and window chowkat of section 92.00mmX29.50mmX1.20mm thick including necessary jointing clips, glazing clips, rubber packing, snap beading , screws, handle, tower bolts and locking arrangements etc including 4mm thick sheet glass tinted quality on panel and stainless steel wirecloth or aluminium anodised wire cloth for mosquitto proofing, 0.45mm nominal dia and average width of aperture 1.40mm fixed with aluminium screws and tacks and making good disturbed surfaces complete all as specified and as directed.

S & F anodized aluminium push pull type fully glazed dooor shutter ( single leaf/ double leaf) having top rail of section 85.00X44.45X2.00mm thick , bottom rail of section 85.00X44.45X2.00mm thick, door vertical of section 44.45X44.45X2.00mm thick and lock rail of section 85.00X44.45X2.00mm thick with aluminium anodised chowkats of section 63.50X33.10X2.50mm thick including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle, locking arrangement, with 5.5mm thick frosted glass including aluminium door closer complete all as specified and as directed.

S&F 30 mm thick Factory Made Solid Panel PVC Door Shutter consisting of frame made out of M.S. tubes of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet 5mm thick ‘C’ channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and plain colour PVC sheets for top rail, lock rail & bottom rail on either side, and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s instructions and drawing. The width of stiles & rails will be in proportion to the width of the door shutter as per SSR Clause No 8B.2.1

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing etc complete all as directed.

S&F steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay with glazing bars, dovetail or welded complete.

S&F steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay without glazing bars complete.

S & F steel ventilators with top hung shutter including hinges, steel peg stay, with glazing bars complete all as specified and as directed.

S & F steel ventilators with top hung shutter including hinges, steel peg stay, without glazing bars complete all as specified and as directed.

S & F steel ventilators and windows fixed type , with glazing bars dovetailed or welded ready for wire mesh/glass pan fixing complete all as specified and as directed.

S&F mild steel Framed work such as grills, gratings, angle iron, mild steel sheets, mild steel round bar, MS flat iron etc.. for chowkhats or doors shutters or windows etc with ends of bars shouldered and/or riveted, wlded or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F 100mm size stainless steel butt hinges, medium weight, and fixed etc complete all as directed.

S&F 150 mm size aluminum anodised, barrel tower bolts of extruded section etc complete all as directed.

S&F 100 mm extruded aluminum alloy handles, fabricated type, anodized all as specified and directed.

S&F 150 mm extruded aluminum alloy handles, fabricated type, anodized all as specified and directed.

S & F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F stain less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or aluminum wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, quality or description) from wooden/steel frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S & F4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane frosted on both sides complete all as specified and as directed.

S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane complete all as specified and as directed.

Dismantling of asbestos cement sheet (corrugated or semi corrugated etc) as in roof covering complete all as specified and as directed.

M&L Pre- painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and directed.

M&L Pre- painted hot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specified complete all as specified and directed. Note: To be executed for provision of ridges and hips.

M & L for 25 mm thick PCC 1:2:4, type B1 (using 20 mm graded stone aggregates) as in floor finished the surface even and rough without using extra cement complete all as specified and as directed.

M & L for 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone aggregates) as in sub base complete all as specified and as directed.

M & L for 75 mm thick PCC 1:4:8, type D-2 (using 40 mm graded stone aggregates) as in sub base complete all as specified and as directed.

M&L for 75 mm thick, PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide and 30 mm deep at every 2.4 mtrs interval filled with bitumastic compound etc complete all as specified and as direted.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed.

M & L for white Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M & L for coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M & L for glazed ceramic coloured tiles 450x300x7mm/350X250X7mm thick / 300X450X7mm thick set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps etc over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

M&L for 20-25mm thick Kota stone slab in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 10 mm thick screed bed in CM 1:3 complete all as specified and directed.

M&L Prepolished cement concrete chequrred tiles coloured of size 30cmx30cmx25mm thick machine pressed , set and jointed and pointed in neat cement slurry with grey cement and pigments including 20mm thick screed bed in CM 1:6 including demolition of old tiles complete all as specified and directed.

Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar (1:3) on fair faces of RCC concrete surfaces and including applying cement slurry in bottom of slab, chajjas, fin, facias etc. complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:4 on brick/ concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for 10 mm thick rendering in CM 1:6 on brick/ concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound (@ 2% by weight of cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately as "Supply only".

Supply only integral water proofing compound complete all as specified and as directed.

Supply only bitumen primer for using in water proofing treatment over roof slab @ 0.40 ltr/sqmcomplete all as specified and as directed.

M&L APP based polymeric membrane minimum 4mm thick reinforced with polyster non woven febric land on primed surface by torch application method complete all as specified and as directed.

Taking down eaves gutter and rain water pipes ( any size or pattern) including all fittings, heads, shoes,bends, swan necks etc. including cleaning and refixing or removal to store ( Measured overall as fixed along the centr line over fittings and accessories).

M&L for 10 mm thick rendering in CM 1:4 on mixed with water proofing compound @2% of weight of cement on concrete surfaces of roof slab complete all as specified and as directed.Note : Water proofing compound will be measured and paid separately as "Supply only".

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed

M&L for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L for complete removal of existing wall surfaces and applying 1mm thick wall care putty on plastered surfaces of wall and applying two coats of exterior emulsion weather resistant/weather shield paint over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall applying 1mm thick wall care putty on plastered surfaces of wall and applying two coats of exterior emulsion weather resistant/weather shield paint over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall applying 1mm thick wall care putty on plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed.

M & L for complete removal of old treated surfaces on walls and applying one coat of alkali resistant primer and a coat of 1 mm thick (average) Birla white cement putty ,sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper over a coat of primer etc complete all as specified and as directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

S&F in repair stainless steel 25mm dia tubular curtain rod including fancy type brackets, stops, rollers etc. complete all as specified and as directed

S&F in repairs, suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Non Asbestos Fiber Cement plain Board (E-Board Classic) in & including a grid of GI system duly suspended with 4mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and as directed.

S&F Rolledmld steel joist, channel, angle or tee sections, fixed independently , without connecting platesetc. ( cut to ordinary lengths i.e within 20mm of the length indicated)complete all as specified & as directed.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed.

S&F Rolledmld steel joist, channel, angle or tee sections, fixed independently , without connecting platesetc. ( cut to ordinary lengths i.e within 20mm of the length indicated) Fe-410W ( Gde E-250) quality B complete all as specified & as directed.

Dismantling wrought iron or mild steel work of any description not otherwise complete all as specified and as directed.

Taking up or down 15 mm bore GI tubing from trenches / wall including all fittings complete all as specified and as directed. Note : Excavation and earthwork if any shall be included in the quoted rate

S&F GI tubing15 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Taking up or down 20 mm bore GI tubing from trenches / wall including all fittings complete all as specified and as directed. Note : Excavation and earthwork if any shall be included in the quoted rate

S&F GI tubing 20 mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.

S&F GI tubing 25 mm bore, medium grade with all fittings and laid in trenches complete all as specified and as directed.

S&F salt glazed stoneware drain pipes 150mm dia laid in trenches and jointed complete all as specified and as directed.

Cutting into existing manholes for connecting new drain pipe of any size making good to pipe and rendering , cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 th section) in cement concrete 1:2 :4 type B-1 smooth finished and reforming benching as required for 150mm dia ( internal ) pipe complete all as specified and directed.

S & F 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc including dismantling of old tank of any description complete all as specified and directed.

S & F 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and directed.

S & F 1000 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc including dismantling of old tank of any description complete all as specified and directed.

S & F gun metal gate valve, with iron wheel head, screwed both ends for iron pipe and fixed suitable for 20 mm bore GI pipe complete all as specified and as directed .

S&F stop valves/ angular stop valve, 20mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.

S&F of Bib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S&F , 15mm dia stop valves stop cast copper alloy, fancy type, chromium plated with long shank and cup ( concealed type) complete all as specified and as directed.

S & F 125 mm, dia chromium plated, swivel type shower rose with 190 mm long chromium plated shower arm and wall flange suitable for fixing 15 mm bore iron pipe complete all as specified and as directed.

S & F in repairs, 125 mm, dia chromium plated, swivel type shower rose with 190 mm long chromium plated shower arm and wall flange suitable for fixing 15 mm bore iron pipe complete all as specified and as directed.

S & F in repair bib taps, 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter- fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix in repairs concealed stop valves 15 mm dia cast copper alloy, chromium plated with long shank and cup (concealed type) screwed down high pressure screwed both ends for iron pipe or unions complete all as specified and directed.

S&F Vitreous china urinal, half stall white (excluding flushing cisterrn) including urinal spreader, PVC connection, 40mm PVC waste pipe & 40mm waste coupling providing and fixing plugs, bedding urinal against wall in mortar 1:2, securing urinal to plug, with and including 60mm long screws, pointing around urinal back in cement, fixing flush pipe, grating and union for discharge pipe complete all as specified and directed.

S & F in repairs, vitreous china, wash hand basin, coloured, flat back size 550 mm x 400 mm including brackets including pillar tap, 15 mm bore chromium plated, cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed

S & F vitreous china, wash hand basin, white coloured, flat back size 550 mm x 400 mm including brackets including pillar tap, 15 mm bore chromium plated, cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed

S & F chromium plated shower rose of size 150mmX150mm square type with necessary accessories complete all as specified and as directed.

S&F in repair, brass chromium plated tubular towel rail of 20mm dia and 60cm in length, D shaped, with brass chromium plated brackets complete all as specified and as directed.

S&F grating doom 125mm dia with waste hole of PTMT complete all as specified and as directed.

S&F in repair stainless steel grating doom 125mm dia complete all as specified and as directed.

S&F CI floor trap100mm outlet with grating including jointing to waste pipe fixed in cement concrete type B-1 ( 1:2:4). complete all as specified and directed.

S&Fchromium plated soap dish of approximate size 160x160x90mm embedded in wall complete all as specified & as directed.

S&F in repair PVC low level flushing cistern 10 litres capacity with inlet ball valve, float and handles including brackets complete all as specified and directed.

S&F PVC low level flushing cistern 10 litres capacity with inlet ball valve, float and handles including brackets complete all as specified and directed.

S&F glass shelf of size 450mmX150mm size with chromium plated guard rail below mirror for keeping soap box complete all as directed.

S&F corner glass shelf fancy type 250mmX250mm/ 300mmX300mm size and 6.00mm thick fixed over brass chromium plated bracket complete all as directed.

S & F , Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed.

S & F in repairs, Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed.

S & F in repairs, vitreous china wash down water closet (pedestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed

S&F 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed

S&F in repairs 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall, ceiling or laid in floor complete all as specified and directed

S&F in repairs 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall, ceiling or laid in floor complete all as specified and directed

S & F 75mm bore PVC ( SWR) junction, single (Single T) equal or unequal with access door complete all as specified and directed.

S&F 110mm dia PVC (SWR) bends of any radius complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) bends of any radius complete all as specified and directed

Taking down ceiling/exhaust/wall fan including connection wires carefully, removing to store and painting with one coat synthetic enamel ( Duco) paint using spray painting machine , refixing in original position after neccessary repairing including changing the old hook, clamp, pipe for ceiling fan etc.complete all as directed

Taking down carefully aluminium/ copper point wiring for light/fan/ socket/bell or power point incl. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete removing materials to store for keeping in safe custody site or handed over to contractor as schedule of credit and making good disturbed surfaces of walls, floors, etc complete all as directed by Engineer-in-Charge.

M&L for point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC rigid conduit ( concealed) with all accessories including febricated MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screws for mounting switches, sockets, regulators etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for one light or fan point controlled by one 5 Amps switch one way complete all as specified and directed.

All as per item No 130 here-in-before but for one 3 pin 5 Amp switch socket outlet on independent board

All as per item No 130 here-in-before but for one 3 pin 5 Amp switch socket outlet on same board with other switches.

All as per item No 130 here-in-before but wiring with 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly.

S&F switch piano, flush type single pole one way 5 Amps 230 volt complete all as specified and as directed.

S&F socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as specified and as directed.

S&F switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as specified and as directed.

S&F switch socket combination multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush type complete all as specified and as directed.

S&F lamp holder insulated, PVC / polycarbonate /bakelite body complete all as specified and as directed.

S&F stepped type electronic fan regulator, two module size, flush type complete all as specified and directed.

S&F ceiling rose surface bakelite 65x50mm three terminal complete all as directed.

S&F in repair LED light fitting of approved make 1X 20 W, 220V, AC decorative batten type with driver, holder including LED lamp and connecting up with three core flexible copper conductor cable of suitable size complete all as directed.

S&F LED light fitting of approved make 1X 20 W, 220V, AC decorative batten type with driver, holder including LED lamp and connecting up with three core flexible copper conductor cable of suitable size complete all as directed.

S&F in repairs, LED35 W building security light made up of pressure die cast housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 and suitable for dia upto 43 mm complete all as specified and as directed .

S&F LED 35 W street light fitting outdoor type with high pressure die cast aluminium housing with heat resistant with driver, lamp with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection complete all as specified and as directed .

M&L for building secruity light bracket made out of 40 mm bore medium grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed.

S&F in repair LED light fitting of approved make mirror type with high output diffuser 2 feet, 10 W, 220V, AC decorative type with driver, holder including LED lamp and connecting up with three core flexible copper conductor cable of suitable size complete all as directed.

S&F in repairs, factory made, sheet steel distribution boards, TPN, 4 Way, protection class IP-43 with min 100 Amp rating copper bus bar, provision for FP MCB as incomer and SP MCBs as outgoing complete and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed .

S & F SPN DBs 8 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amp rating copper bus bar complete all as specified and as directed.

S & F in repair SPN DBs 8 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amp rating copper bus bar complete all as specified and as directed.

S&F MCBs,TPN 40 to 63 Amps, 10 KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed.

S&F MCBs, SP 6 to 32 Amps, 10 KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed.

S&F MCBs, SPN 32 Amps, 10 KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed.

S&F ceiling fan complete with blades, down rods, electronic regulators and accessories, 230 V 1200mm sweep, minimum air delivery 210 CFM with service value 6.00BEE, five star rating with bushless direct current motor ( BLDC)complete all as specified and directed.

S&F of Exhaust fans AC single phase 230/ 240 V ,50 Hz metallic heavy body of size 300 mm sweep, 1400 RPM with louver fixing with 4 no hold fastener nut and bolt with washer and connecting with flexiable PVC insulated multistranded copper conductor cable of size 1.5 sqmm including civil work opening on wall of suitable size and 400x400x6mm thick BWR graded plywood making suitable hole for fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and writing MES No. with black synthetic enamel paint with 2cm high letter and making good surface complete all as specified and directed.

Supply, laying and testing of XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 10 sqmm 2 core laid in trenches / floor or fixed on wall /pole with brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

Supply and spreading fine dry river sand for cushing to UG cable including spreading levelling and hand punning etc complete all as specified and directed.

M&L for sub class 'B' old size bricks laid in trenches for cable protection laid flat width wise along the length of cable complete all as specified and directed.

M&L in repair Sub main wiring with 2 runs of 4.0 sqmm, single core, FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion complete all as specified and directed. (Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit all together shall be measured as one unit.)

Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 with and including demolition of old earthing..

Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 .

Supply, fixing and testing of vertical wall mounted Storage type electric water heater of capacity 25 ltrs with BEE 5 star rated, 230 V, maximum power consumption 2 KW, Drypowder Fero Glass coating Technology for inner container with Heavy Duty seamless Incoloy 800 Glass lined heating element, and 2 Nos PVC connecting pipe of whirl technology 15 mm bore 450mm long for hot and cold water supply complete with all accesories and all as specified and directed .

Cutting existing steel tubing 15mm dia for addition / insertion of new Tee / Elbows / Socket etc. (Each cut measured) by screwing existing pipe line complete all as specified and as directed.

M&L Sub main wiring with 2 runs of 6.0 sqmm, single core, FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion complete all as specified and directed. (Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit all together shall be measured as one unit.)

M&L Sub main wiring with 2 runs of 2.5 sqmm, single core, FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 2.5 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion complete all as specified and directed. (Note: 2 run of 2.5 Sqmm cable and 1 run of 2.5 Sqmm cable along with conduit all together shall be measured as one unit.)

SHANKAR ENTERPRISE

Tarun Deka