Renovation of Road

Amount

Providing and applying tack coat with bitumen (VG-10) using bitumen Emulsion pressure distributor @0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with mechanical broom as per Technical Specification Clause 503.

Providing and laying dense graded bituminous macadam(DBM) with 60-90 TPH computerized HMP producing an average output of 75 tonne per hour using crushed aggregate of specified grading premixed with bituminous binder @ 4% by weight of total mix and filler,transporting the hot mix to work site,laying with a hydrostatic paver finisher with sensor control to the required grade,level and aligment ,rolling with smooth wheeled ,vibratory and tendem rolles to achieve the desired compaction as per MORTH specificatios clause 507 complete in all respects.

Providing and laying bituminous concrete(BC) with 100-120 TPH type hot mix plant producing an average output of 75 tonne per hour using crushed aggregate of specified grading premixed with bituminous binder @ 5.4 to 5.6% of mix and filler.

Providing and laying of hot applied thermoplastic compound 2.50 mm thick including reflectorising glass beads @250 ghms per sqm area,thickness of 2.50 mm is exclusive of surface applied glass beads as per IRC 35.The finished surface to be level,uniform and free from streas and holes.

S/F of pavement maker (Cat Eye) Type X-ASSTMD-4956-04 every dennison/3 M (USA make) consisting of ASA plastic housing fitted with tightly adherent plotting compound.The housing shall contain prismatic two glass covered prismatic refletive face to reflect incident light including cost of tax.

R.P. SINGH