CONSTRUCTION OF COMMUNITY HEALTH CENTER WITH RESIDENTAIL ACCOMENDATION AT BARAGUDHA IN DISTT. SIRSA. (PDG. E.I INTERNAL and STREET SECURITY LIGHT ONLY).

Amount

Main Switches: 31.12 Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections. (v) Double pole switch 32 amp. 415 Volts Cat-B.

Triple pole switch with neutral link 32 amp. 415 Volts Cat-B.

Triple pole switch with neutral link 63 amp. 415 Volts Cat-B.

Triple pole switch with neutral link 100 amp. 415 Volts Cat-A.

31.12 (c) Moulded case Circuit breakers: Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. i) 15 amp.to 60 amp. 415 V ,10 KA 3-phase.

100 amp.to 220 amp.415 V,10 KA 3-phase.

31.13 Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. i) Size 40 mm x 40 mm x 6 mm.

31.14 M.S.Sheet : Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.

31.15 Distrubution board with plug and socket.Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. i) S.P.N. enclosure for single pole MCB 20 amp.

31.16 Blanking sheet: Supply and erection of blanking sheet in existing distribution board.

31.17 Miniature Circuit Breaker and Isolator: Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. Miniature circuit breakers of 9 KA breaking capacity. I) SP MCB 6 amp. to 32 amp.

SPN MCB 6 amp. To 32 amp.

TPN MCB 6 amp. to 32 amp.

TPN MCB 40 amp. to 63 amp.

31.18 Supply and erection of Fittings and Accessories: Bakelite angle / straight button holder large size.

Call bell 220 / 230 volts A.C. bakelite with double coil.

Bell push flush type ( without flexible wire ) in existing sheet.

Switch 5 amp. On existing sheet.

Wall socket 5 amp. On existing sheet.

Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job.

Supply and erection of luminous bell indicator complete including making necessary connections and fixing the same on wall etc. to complete the job in all respect.

31.21 Pipe Laying.Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. I) Galvanized iron pipe 40 mm dia on flushed.

Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed.

Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

Galvanized iron flexible pipe complete with socket nipples and check nuts etc. at both ends ( upto length of 1 meter.) b) Size 20 mm dia.

For additional length of Galvanized iron flexible pipe more than 1 meter ( the payment is to be made for additional length of pipe more than 1 meter only in item no. xxvii ). B) Size 20 mm dia.

Supply and erection of PVC pipe of 6 kg. pressure laid 1 meter below ground level complete including digging refilling of the trench with jointing etc. a) PVC pipe 120 mm dia.

31.22 (Q) Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

Extra for using salt and charcoal / coke for pipe earth electrode as required.

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.

Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required .

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .

Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. staples of same size.

31.25 Under Ground Cables: Supply and erection of under ground cable 1 meter below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches. i) 25 Sq. mm 3.5 Core Ard. Cable .

70 Sq. mm 3.5 Core Ard. Cable.

10 Sq. mm 4 Core Ard. Cable .

16 Sq. mm 4 Core Ard. Cable .

31.26 Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . i) 16 Sq. mm 2 Core Ard. Cable.

25 Sq. mm 3.5 Core Ard. Cable .

70 Sq. mm 3.5 Core Ard. Cable.

10 Sq. mm 4 Core Ard. Cable .

16 Sq. mm 4 Core Ard. Cable .

31.28 Supply and erection of suitable compression type brass cable glands for underground Cable. I) 10 Sqmm to 16 Sqmm Cable 2 to 4 Core .

25 Sqmm to 50 Sqmm Cable 2 to 4 Core.

70 Sqmm to 95 Sqmm Cable 3 to 3.5 Core .

31.30 (T) Street Light: Supply and erection of weather proof M.S.Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, locking arrangements , housed in wall , including the cost of 1 no. 16 amp. 415 volts kit-kat and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board in the M.S.Box including painting and necessary connections.

31.35(X) Miscellaneous: Supply and erection of caution notice plate in three languages.

Supply and erection of shock restoration chart in glass frame

Supply and erection of 75 mm x75 mm x 60 mm deep M.S.box for telephone and inter-communication system including 2 pin 5 amp. socket including cost of bakelite sheet

31.36 PVC Insulated wiring in recessed conduit. Wiring in 1.5 sqmm PVC insulated copper conduct cable in 1.6 mm thick conduit pipe. i Fan Point b) Medium Point

Long Point

ii Light Point a) Short Point

Medium Point

Long Point

iii Twin Control Light point with 2 way, 5 amp. Single pole switch c) Long Point

vi Call bell point including MS box of size 180mmx 60 mm deep for call bell. C) Long point

vii 3 pin 5 amp. Plug point including earthing the 3rd pin etc. a) Short Point

Long point

viii 3 pin 15 amp. Plug point with 4 amp. PVC insulated copper conductor cable including earthing the 3rd pin etc. c) Long point

31.40 S/E of of PVC unsheathed copper conductor cable single core 1100 volts grad in pipe of suitable size excluding cost and erection of pipe. i) Cable size 1.5 sqm(3/0.81 mm)

Cable size 2.5 sqm(3/1.05 mm)

Cable size 4 sqm(7/0.85 mm)

Cable size 6 sqm(7/1.05 mm)

Cable size 10 sqm(7/1.35 mm)

31.41 S/E of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. I) 8-way, SP&N (Horizontal)

4-way,TP&N (Horizontal)(8+12)

12-way,TP&N (Horizontal)(8+36)

31.44 S/E of PVC conduit pipe ISI marked (Medium) recessed in wall/ ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of the work. A) 20mm dia

31.48 S/E of MS saddles and clamps on wall/ RCC parapet for fixing underground cable at a distance of 0.60 meter centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect upto the Engineer-in-Charge of the work.

31.55 Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Delux model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection ect upto the entire satisfaction of the Engineer-in-Charge of the work.

31.68 Supply and errection of Hot Dip Galvanized octagonal pole 3 mm thickness, with base plate including of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete of 2 nos. 100 A, 4 pole nature links including connection etc with suitable connection arrangements for 2 no. MCB/ kit kat including cost of RCC 1:1:5:3 for foundation of size 0.7 m x 0.7m x 1.8 m with minimum 8 Nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm CC for fixing the pole with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. Make Bajaj/ Philips/ Surya Roshni/ Skipper/ Vipin ST Pole i) 7 M long pole with top dia 70 mm and bottom dia 130 mm with base plate of size 220 x 220 x 12mm.

31.69 Supply and erection of module case circuit breaker single pole/ 4 pole on wall /on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. Vii) 4 Pole MCCB 300 amp to 400 amp.

MR ITEM: S/E of M.S. box for computer made of 18 guage of size 8" x10" x 4" covered with 3 mm thick bakelite sheet white colour of ISI mark fixed by means of 4 nos .brass screws with cost of 1 No. 15 amp multi socket of ISI mark and 15 amp switch and 3 nos .5 amp multi socket with 5 amp switches of ISI mark including fixing the M.S. box in wall with cost of cement sand mixture including painting of M.S. Box and to complete the job in all respect upto the entire satisfatoin of Engineer-in- Charge of the work

MR ITEM: Supply/ errection/ testing / commissioning of digital main switch- cum- pedestal- cum -distribution board -cum street light panel of 32 amp 3 pole / 230 Volts with digital time switch having suitable size of 1 No. 40 amp TPN MCB, 1 no. 32 amp TP contactor, 1 HRC fuse , 1 Indicator & 2 No. TP MCB 32 amp having IP 52 Degree protection all items should be of same make / manufacturer including padestal, including making connection and petty material required to complete the job in all respect upto the entire satisfaction of Engineer-inCharge of the work. (Make:- IndoAsian/ Havell's/ Standard).

MR ITEM: Supply & Erection of single arms bracket made of 32/50mm dia GI pipe B class ISI 1.20 mtr. Long with coller pipe (GI) 75mm dia 60cm Long top covered with ornamental cap duly welded, painted 2 coats of aluminum paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge. Bracket duly erected on existing 7/9 Mtr. High Octagonal pole.

MR ITEM: Supply and erection of 25 W LED Post lantern new generation energy saving envirmental friendly long life aesthetically designed with symmetrical light distribution, spen aluminum land scap luminaries with high power LED as light source with the protection of IP-65 of LHEVBGP7PN 6K 025 (Rubby clear) of Havell's make/ BLPTSP 25 W NW LED of Bajaj make/ LPTH-20- CDL of Crompton make complete with all accessories and labour to complete the job upto the entire satisfaction of Engineer-in-charge of the work.

MR ITEM: S/E of 60 W LED Flood light luminaries with high power LED 110 Lumens per Watt Philips / Havell's / Wipro/ Bajaj make in aluminum pressure die casting housing toughened glass cover with IP-66 protection With Lense and dual surge protection device internal 5 KV and external 10 KV including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work. (For Top of Building).

MR ITEM: S/E of 60 W LED street light fitting < 100 Lumens per Watt Philips / Havell's / Wipro/ Bajaj make in aluminum pressure die casting housing toughened glass cover with IP-66 protection With Lense and dual surge protection device internal 5 KV and external 10 KV including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work. .

Chopta Offset Printers

Jayanti Electricals

RAMJI POWER