DOOR TO DOOR MAINTENANCE OF ELECTRIC INTERNAL COMPLAINTS AT ATS BELAGAVI UNDER GE (AF) SAMBRA

Taking down switch boards / fitting / fixture , identify and rectify the complaints pertains to internal electrification of any type and nature IN MD Accns such as rectification of faulty electric circuit , tightening of loose wiring / conduits replacement of defective accessories such as switch, socket, ceiling rose , holders, etc.., complete all as specified and directed . . Note:- (a) If the contractor fail to rectify the defects mentioned in the complaint slip on within 48 hrs,. they will be charged Rs. 100/- per complaints/ per day and same will be recovered from his RAR. Each job shall contain 10 complaints (b) The contractor / their rep will collect the complaint from complaint cell ( Concerned JE E/M) every day at 9.00 AM and rectify the complaints 48 hrs and deposit the complaint slip ( duly signed by the users ) to concerned JE E/M. (c) New Switch, socket, ceiling rose , holders, etc.., shall be measured and paid separately (d) Cost of minor stores , such as screws, clamps, washers,bakelite laminated sheet top cover, insulation tapes, nut , bolts etc. shall be deemed to be included in the quoted rate

Taking down carefully (aluminium) point wiring complete of any type (batten/ surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as spcified and directed.

M&L for point wiring light point or fan point controlled by one switch with and including single core FRLSH PVC insulated and unsheathed stranded copper conductor cable of size 1.5 sqmm 1100 volts grade drawn through and including suitable size of PVC cassing capping with accessories with laminated top cover fixed on MS sunken box for housing of switch, socket, regulator etc complete with and including 1.5 sqmm FRLSH PVC insulated and unsheathed stranded copper conductor cable as earth wire and connected to common earth dolly and making good to the disturbed surfaces of wall, floor, ceiling etc to match with exisiting surface complete all as specified and as directed

All as per Srl item No 3 here-in-before but socket point 5 Amps on independent board

All as per Srl item No 3 here-in-before but socket point 5 Amps on the same board with other switches

All as per Srl item No 3 here-in-before but cable of 4 Sqmm for 15 Amp switch socket outlet on independent board including provision of 4 Sqmm PVC insulatred unshethed multistranded copper conductor as earth wire

All as per Srl item No 3 here-in-before but for one light point control by two way switch

M&L for point wiring for the following with and including single core FRLSH PVC insulated and unsheathed stranded copper conductor cable of size 1.5 sqmm 1100 volts grade drawn through and including suitable size of PVC concealed conduit with accessories with laminated top cover fixed on MS sunken box for housing of switch, socket, regulator etc complete with and including 1.5 sqmm FRLSH PVC insulated and unsheathed stranded copper conductor cable as earth wire and connected to common earth dolly and making good to the disturbed surfaces of wall, floor, ceiling etc to match with exisiting surface complete all as specified and as directed for the following :-

One light/fan/exhaust fan/bell point controlled by one switch.

One pin 5 amps socket point on the same board with other switches complete

One 3 pin 5 amps socket on independent board.

All as per Srl item No 8 above but with 4.0 sqmm copper wire for 3 pin socket outlet 15 Amp on independent board

S&F in replacement LED lights fitting 1x 20W, 220V, wall mounted LED batten with Aluminum Housing & integrated electronic driver including connecting up with 0.75Sqmm three core flexible copper conductor cable from ceiling rose complete all as specified and as directed. Make:- Cat Part No: LUMILINE+BS20WLED830SPCSSIND of Havells make or equivalent make of Bajaj/Philips/Wipro/ Crompton

S&F in replacement LED lights fitting 1x 10W, 220V, wall mounted LED batten with Aluminum Housing & integrated electronic driver including connecting up with 0.75Sqmm three core flexible copper conductor cable from ceiling rose complete all as specified and as directed. Make:-Cat Part No: LUMILINE+BS10WLED865SPCSS of Havells make or equivalent make of Bajaj/Philips/Wipro/ Crompton

S&F in replacement LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement lamp holder PVC/Poly carbonate body with back plate complete all as specified and as directed

S&F in replacement Switch piano Single pole 16 Amps, two way complete all as specified and as directed

S&F in replacement switch piano flush type, Single pole 6 Amps, one way complete all as specified and as directed

S&F in replacement of switch piano flush type, Single pole 15 Amps, one way complete all as specified and as directed

S&F in replacement of socket outlet flush type, 3/5 pin, 5/16 Amps complete all as specified and as directed

S&F in repalcement of Switch Socket combination flush type 16 Amps complete all as specified and as directed

S&F in replacement of socket outlet flush type, 3 pin, 5 Amps, complete all as specified and as directed

S&F in repalcement of Switch Socket combination flush type 5Amps, complete all as specified and as directed

S&F in replacement of ceiling fan regulator electronic type, 230 Volt, 150 Watt with 5 step of control including making holes in laminated bakelite sheet cover and connection complete all as specified and as directed

S&F in replacement of ceiling rose PVC/poly carbonate insulated body three terminal ISI marked, complete all as specified and as directed by Engineer-in-Charge

S&F in replacement recessed mounting LED 2x2 luminaire type complete all as specified and directed. Make:- BCTBLR 36W ZTN NW in make Bajaj or equivelent in CG / Phillips / GE / Wipro / Havells

S&F in replacement MCB single pole, 240 volts of rating 6-32 Amps of C curve breaking capacity of 10 KA complete all as specified and as directed

S&F in replacement MCB suitable for 6 to 32 Amps, 240 Volt AC supply C Curve single pole and neutral(SPN) with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed

S&F in replacement MCB 63 Amps, 440 Volt AC supply Triple pole with neutral(TPN) C curve with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed

S&F in replacement sheet metal enclosure MCCB DB, double door, vertical TPN 4 way with 200 Amps rated busbar all as specified and as directed.

S&F in replacement MCCB 63 amps, 3 pole, 415 volts, fixed type breaking capacity 16KA complete all as specified and as directed

S&F in replacement MCCB 100 Amps, C curve TPN, 415 volts,16KA,3 Pole complete all as specified and as directed

S&F in replacement MCCB 125 Amps, C curve TPN, 415 volts, 16KA, 3 Pole complete all as specified and as directed

S&F in replacement bell ding dong AC single pole 230volts complete all as specified and as directed

S&F in replacement bell push button Piano flush type single pole 5 Amps complete all as specified and as directed

S&F in replacement sheet metal enclosure for distribution boards flushed in wall double door suitable for fixing MCBs 240 volts with 200 Amps rated bus bar,SPN 8 ways and making good the disturbed surface of wall to match with the existing surfaces complete all as specified and as directed Note : Cost of cutting/chasing of wall and making good disturbed surface shall be deemed to be included in the quoted rate

S&F in replacement Sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 240 volts with 200 Amps rated bus bar,SPN 12 ways and making good the disturbed surface of wall to match with the existing surfaces complete all as specified and as directed Note : Cost of cutting/chasing of wall and making good disturbed surface shall be deemed to be included in the quoted rate

S&F in replacement Sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 240 volts with 200 Amps rated bus bar,SPN 4 waysand making good the disturbed surface of wall to match with the existing surfaces complete all as specified and as directed Note : Cost of cutting/chasing of wall and making good disturbed surface shall be deemed to be included in the quoted rate

S&F in replacement Sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 240 volts with 200 Amps rated bus bar,TPN 4 waysand making good the disturbed surface of wall to match with the existing surfaces complete all as specified and as directed Note : Cost of cutting/chasing of wall and making good disturbed surface shall be deemed to be included in the quoted rate

S&F in replacement single pole and neutral enclosure with two pin and earth plug and socket including 1Nos MCB 20Amps capacity complete all as specified and directed. Make:- Cat Part No 607841 of Legrand or equivalent in Schneider/Seimens/L&T

S&F in replacement LED Bulb 12W (in different colors) complete all as specified and as directed

S&F in replacement Decorative wall light fixture made up of Polycarbonate, suitable for retrofit 9/11 W LED lamp Complete all as specified and directed by Engr-in-charge. Make : Surya / Havell's/ Phillips

Dismantling and taking out faulty wiring including casing and capings/conduits etc and refixing the same after rectification of fault in original position including replacment of copper/aluminum cable any size not more than 10 mtr & casing/capping/conduit not more than 5 mtr and testing after completion complete all as specified and directed

S&F switch Modular type, 6 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and directed

S&F switch Modular type, 16 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and directed

S&F Switch Socket combination 3 Pin 6 Amps modular type, 2/3 pin combined 3/4 module 230 Volts complete all as specified and directed

S&F Switch Socket combination 3 Pin 6/16 Amps modular type, 2/3 pin combined 4 module 230 Volts complete all as specified and directed

S&F fan step regulator modular type,120W -1/2 module as per existing size, electronic socket type five step controlled 230V AC 50 Hz for complete all as specified and directed

S&F in repairs modular white cover plate with frame but 1 module complete all as specified and as directed.

S&F in repairs modular white cover plate with frame but 2 module complete all as specified and as directed.

S&F in repairs modular white cover plate with frame but 3 module complete all as specified and as directed.

S&F in repair modular white cover plate with frame but 4 module complete all as specified and as directed.

S&F in repair modular white cover plate with frame but 6 module complete all as specified and as directed.

S&F in repair modular white cover plate with frame but 8 module complete all as specified and as directed.

S&F in repair modular metel flush box but 1,2,3 module to suit as existing make complete all as specified and as directed

S&F in repair modular metel flush box but 4 module to suit as existing make complete all as specified and as directed

S&F in repair modular metel flush box but 5/6 module to suit as existing make complete all as specified and as directed

M&L for earthing complete with galvanized steel earth plate electrode 60cm x60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level connecting to the galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanized iron and steel earth wire protected by provision of GI mediumgrade pipe 15mm bore including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) and frame of angle iron 40x 40x6 mm and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering perforated at bottom, 1.75meter long placed on top edge of earth plate, common salt & charcoal filling with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate No -5 of SSR 2009 Part-I and connecting to Lighting protection earth test points all as specifed and directed including testing on completion complete all as specified and directed.