Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.0 LAccepted-AOC GUDSATHU BUDGAM KASHMIR 191111 J K | BUDGAM | BUDGAM | JAMMU AND KASHMIR | 191111 | L1 | Accepted-AOC AWARDED BEING L1. | |
| 2 | L2₹7.9 L+₹71,993.50 (10.0%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN L1. | |
| 3 | L3₹8.1 L+₹97,098 (13.5%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN L1. | |
| 4 | L4₹8.8 L+₹1.7 L (23.2%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN L1. | |
| 5 | L5₹8.9 L+₹1.7 L (23.6%)Rejected-Finance R O IQBAL MARKET AALI MAJID EIDGAH SRINAGAR KASHMIR | SRINAGAR | JAMMU AND KASHMIR | 190001 | L5 | Rejected-Finance OTHER THAN L1. |
Tender Value
₹9.6 L
EMD Value
₹19,140
Closing Date
22 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) CIF (K)
AGE (I) CIF (K) SHALATENG
PROVN OF BOX TYPE STEEL WINDOW, PRESSED STEEL DOOR FRAME ALONGWITH GUARD BAR IN LIEU OF UNSV WOODEN JOINERY IN CERTAIN MD ACCN OF HQ CIF (K) AT MILITARY STATION SHARIFABAD UNDER AGE (I) CIF (K)
2024_MES_639107_1
CA NO. AGE (I) CIF (K)-75/2023-24
Open Tender
Civil Works
Item Rate
180 days
SHALATENG
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
AGE (I) CIF (K)
₹19,140
Yes
18 Mar 2024
25 Jan 2024
24 Feb 2024
25 Jan 2024
22 Feb 2024
8 Feb 2024
Amount
Taking down chowkat or frames with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) , complete all as specified and directed by the Engineer-in-Charge.
Taking down chowkat or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc 4 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost), complete all as specified and as directed by the Engineer-in-Charge.
S&F steel window 1.25mm thick box type (primer coated) ERW hollow 'P' section of size 60mm x 25 mm single rebated comprises gauged skeleton shutter ERW sec 50mm x20mm and 1 mm thick and two openable leaf consisting two Nos sash bar of 'T' section 20mm x3mm complete welded to frame with one verticle mullion of ERW box type 'T' section of size 60mm x25mm and 1.25mm thick including cutting holes and making good dismantled portion after fixing of window frame in PCC (1:2:4) type B1 using 20mm graded stone aggregate as in hold fast concrete. The following fittings are included /welded to framed shutter:- (a) Holdfast 150mm long 12mm x 3mm made to shape per window-04 Nos. (b) Handle of Z section 20mm x 25mm , 100mm long per leaf-02 Nos. (c) MS tower bolt 150mm long per leaf-02 Nos (d) 'Z' section 20mm x 25mm , 100 mm long stopper per leaf- 01 Nos (e) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges per leaf- 01 Nos (f) MS pintal hinges of size 75mm x 12mm per leaf -02 Nos (g) Fabrication and fixing arrangment as per drawing No CESZ/TD/1018/2011 Sheet No 1/3 to 3/3. Note Guard bar and FI 50x5 all around for joining of gauged and glazed frame will be measured and paid separitely.
-ditto- as as per item No 3 above herein before but glazed shutter with frame complete all as spd and directed by Engineer-In-Charge.
Pressed steel frames of size 165 x 60mm for doors with one or more rebates including necessary fixing lugs, 100mm hinges as required, lock strike plate, etc., complete, as specified, supplied and fixed, complete all as specified and directed by Engineer-in-Charge.
Providing, cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in back filling in pressed steel frames, hold fasts and similar articles, complete all as specified and directed by Engineer-in-Charge.
Plain framed , panelled shutters (any numbers of panels), 35mm thick, made of 2nd class soft wood (kail), with panels of timber flat on both sides (feather edged), or 12mm thick BWP of veneered particle board medium density wood commercial face veneers supplied & fitted to chowkats, complete all as specified and as directed by the Engineer-in-Charge.
Glazed and skeleton shutters, 35mm thick, made of 2nd class soft wood (kail) open rebated and prepared to receive glass, gauze, etc, (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters as specified in SSR Part -I. section 8, clause 8.23(a) for doors etc are provided with stiles and rails, complete all as specified and as directed by the Engineer-in-Charge.
Mild steel galvanised wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc., complete all as specified as directed by the Engineer-in-Charge.
Sheet glass 3mm thick ordinary quality and glazing with oil putty/pins/spring pins or wooden beads in squares not exc. 0.5 Sqm in each pane, complete all as specified as directed by the Engineer-in-Charge.
Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, flat iron, barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed by the Engineer-in-Charge.
S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, 250 mm long, complete all as specified and directed by the Engineer-in-Charge.
S&F Aluminium anodised, barrel tower bolt of extruded section and fixed, 150 mm long (ISI marked), complete all as specified as directed by the Engineer-in-Charge.
S&F Aluminium handle, cast type, anodised, 150 mm long (ISI marked), complete all as specified and directed by the Engineer-in-Charge.
S&F 300mm ordinary rat tail rod pattern door spring including roller and roller plate of mild steel, complete all as specified as directed by the Engineer-in-Charge.
S&F floor door stopper aluminume alloy body and tongue, anodised with hard dran steel spring fixed in foor overall length of coper plate 140mm.
Preparation of newly untreated steel or iron surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate, complete all as specified and as directed by the Engineer-in-Charge.
Preparation of new or previously untreated wood or wood based surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified as directed by the Engineer-in-Charge.
Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge.
Brick work with sub class `B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and directed by the Engineer-in-Charge.
Taking down plastering in cement lime or cement mortor on brick or stone work etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed by the Engineer-in-Charge.
Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge.
Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge.
Preparation of new plastered / unplastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of primer, complete all as specified and as directed by Engineer-in-Charge.
Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali-resistance primer paint, complete all as specified and as directed by the Engineer-in-Charge.
Note :- An amount of Rs.18,600.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.
M/S M.S. BUILDERS
M/S N A Enterprises
M/S A.M. ENTERPRISES
M/S SHIMAR STAR GLACIER
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .