Construction of SJMMGSS School at Amini PhaseV Block D. G plus2

Amount

Surface dressing of the ground including removing vegitation and in equalities not exceeding 15cm deep and disposal of rubbish lead up to 50meter and lift up to 15 meter.(Labour Element)

Earth work excavation by manual means in foundation trenches or drains (not exceeding 1.5m width or 10sqm on plan) including dressing of sides and ramming of bottom,lift up to 1.5,including getting out othe excavated soil and disposal of surplus excavated soil as dirdcted ,withinm a lead of 50mtr. Ordinary Soil.(Labour Element)

Up to 1.50 Mtr

Up to 1.50 Mtr to 3.00 Mtr

Up to 3.00 Mtr to 4.50 Mtr

Up to 4.50 Mtr to 6.00 Mtr

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundation etc layers not exceeding 20cm in depth consolidating each deposited layers by ramming and watering lead up to 50mtr and lift up to 1.5mtr.(Labour Element)

Providing and laying cement concrete 1:4:8 (1cement :4 M.sand :8 Granite chips) foundation and plinth .(Labour Element)

Providing and laying cement concrete 1:5:10 (1cement : 5 M.sand : 10 Granite chips) foundation and plinth .(Labour Element)

Providing and laying damp proof course 40mm thick with cement cocrete 1:2:4(1cement 2M.sand 4 granite chips 20mm nominal size).(Labour Element)

Centering and shuttering including strutting propping etc and removal of form work for Foundation footings bases of column etc,and mass concrete.(Full Cost)

Centering and shuttering including strutting propping etc and removal of form work for Suspended floors,roofs,landings,balconies and acess plat form.(Full Cost)

Centering and shuttering including strutting propping etc and removal of form work for Lintels,beams,plinth beams,girders.bressumers and cantilevers.(Full Cost)

Centering and shuttering including strutting propping etc and removal of form work for Column,piller,piers, abutments, posts and struts.(Full Cost)

Centering and shuttering including strutting propping etc and removal of form work for Stairs,(excluding landings) except spiral-staircase.(Full Cost)

Centering and shuttering including strutting propping etc and removal of form work for well sterning.(Full Cost)

Reinforced cemnt concrete 1:1:5:3(1cement 1.5 M. sand :3granite chips 20mm nominal size ) excluding cost of cenring shuttering and reinforcement all work up to plinth level. (Labour Element)

a) Foundation footings bases of column etc,and mass concrete.

Reinforced cement concret working (wall any thickness) including attached pilasters ,buttresses plinth and string course, fillets, column, pillars, piers ,abutments,post and struts etc..up to floor five level excluding cost of centering and shuttering finishing and reinforcement.1:1.5:3(1 cement 1.5 M. sand :3 granite chips 20 mm nominal size )(Labour Element)

Reinforced cement concrete work in beams ,suspended floors ,roofs,having slope up to 15 degree landing ,shelves chejjas,lintels ,bands,palin window sills,staircase and spiral staircase up to five level excluding cost of centering and shuttering finishing and reinforcemetn with 1:1.5:3(1cement 1.5 M.sand :3graded stone sggregate 20mm nominal size).(Labour Element)

Providing and fixing precast cement concrete 1:2:4 (1cement: 2 M.Sand: 4 graded stone aggregate 20mm nominal size) set in position with cement mortar 1:2 (1cement: 2 fine sand) and finished smooth with 6mm thick cement plaster 1:3 (1cement: 3 fine sand) one xposed surfaces including centering and shuttering in affle wall and slab.(Labour Element)

Reinforced cement concrete work in well-steining excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)..(Labour Element)

Cold twisted steel reinforcement for RCC work including bending,binding and placing inposition complete.(Labour Element)

Cement concrete block (machine moulded) masonry in Foundation and plinth in CM 1:6 with blocks of size 40 cm x 20 cm x15 cm. (Labour Element)

Cement concrete block (machine moulded) masonry in Super structure above plinth level in CM 1 : 6 with blocks of size40 cmx 20cm x15 cm.(Labour Element)

Half brick work with modular bricks of class designation in foundation and plinth in C.M.1:4 (1Cement: 6 Metal sand).(Labour Element)

Half brick work in superstrucute above plinth level up to floor five level in cement mortor 1:4(1 cement 4 M.sand).(Labour Element)

6mm thick cement plaster to ceiling 1:3 (1 cement 3 Plastering sand).(Department shall provide cement, contractor has to bring P.sand)

15mm thick cement plaster 1:6 (1 cement 6 plastering sand)on the rough side of single or half brick wall .(Department shall provide cement, contractor has to bring P.sand)

12mm thick cement plaster 1:6. (1 cement 6 plastering sand).(Department shall provide cement, contractor has to bring P.sand)

12mm thick cement plasterto top slab 1:4. (1 cement 4 plastering sand).(Department shall provide cement, contractor has to bring P.sand)

Providing wood work in frames of doos ,windows,clearstory windows and othe fames wrough ,framed and fixed in position complete Ist class karimaruth/Irul/Ayni .(hold fast lugs or dasg fastener shall be paid for separately).(Full Cost)

Providing and fixing 35mm thick panelled ,glazed or panelled and glazed shutters for doors, windows and clestory windows including anodised aluminium butt hinges with necessery screw.first class karimaruth /Irul/Ayni.Including 4mm thick float glass panes (Full Cost)

Providing and fixing karimaruthu wood or equivalent 25mm squre wooden bars at required spacing in wooden frames of windows and clerestory windows.(Full cost)

Proviidng 40x3mm Iron hold fast 40cm long i/c fixing to frames 10mm dia bolts,nuts and wooden plugs and embedding in cement concrete blocks of size 30x10x15cm of mix 1:3:6(1cement 3M.sand 6stone aggregate 20mm nominal size).(Full cost)

Providing and fixing Bright finished brass door latch with necessery screws.(Full Cost) a)300mmx 16mm x 5mm

Providing and fixing anodised Brass tower bolt (barrel type) with screws etc complete.(Full Cost)

a)100mmx10mm

b)250mmx10mm

Providing and fixing Brass Handle with necessry screws ect complete.(Full Cost) a) 100 mm

Providing and fixing Bright finished brass casement stay with necessary screws .200 mm weighing not less than 240 gms.(Full Cost)

Providing and fixing Bright finished brass door stoper with rubber cusion & necessary screws.(Full Cost)

Providing and fixing Bright finished brass Hydraulic door closer with necessary fittings &screws ..(Full Cost)

Providing and fixing 100 mm Bright finished brass mortice latch and lock with 6 levers and a pair of lever handles with necessary screws..(Full Cost)

Providing and fixing Aluminium curtain rods with Aluminium brackets:20 mm dia (heavy type).(Full Cost)

Providing and fixing M.S. fan clamp type I or II of 16mm dia M.S.bar bent to shape with hooked ends in R.C.C.slabs, beams during laying including painting the exposed portion of loop,all as per standard design complete..(Full Cost)

Providing and fixing to existing door frames. 30mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture,made with fire-retardant gradeunsaturated polye sterresin,moulded to 3mm thick FRPl aminate fo forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels confirming to TADS 6: 1993 and / or IS: 14856 - 2000 including fixing to frames.(Full Cost)

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90mmx45 mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness.Thelaminate shall be molded with fire resistant grade unsaturated polyester resinand chopped mat . Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be covered with fibre glass from all sides.MS stay shall be provided at the bottom to steady the frame..(Full Cost)

Providing and laying Vitrified matt finishe floor tiles (premium quality) in differnet sizes (thickness to be specified by the manufacture) with water absorbtion less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid 20mm thick cement mortor 1:4 ( 1 cement 4 P.sand) including grouting the joints with white cement and matching pigents etc.. ocmplete. Size 600 X 1200 (flooring), Kahajaria matt finish vitrifies tiles/ Johnson / Bell.(Department shall provide cement and contractor has to bring tiles and P.sand)

Providing and laying Vitrified matt finished floor tiles (premium quality) in differnet sizes (thickness to be specified by the manufacture) with water absorbtion less than 0.08% and conforming to IS:15622 of approved make in all colours and shades,in skirting , riserof steps, over 12mm thick bed of cement mortor 1:3 ( 1 cement 3 P.sand) including grouting the joints with white cement and matching pigents etc.. ocmplete. Size 600 X 1200 (skirting), Kahajaria matt finish vitrifies tiles/ Johnson / Bell.(Department shall provide cement and contractoer has to bring tiles and P.sand)

Providing and fixing ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacture) of first quality confirming to IS:15622 of approved make, in colours such as White, ivory, Grey, Fume red brown, laidon 20mm thick cement mortar 1:4 (1 cement ,4 P. sand)and joining with white cement and matching pigment etc... complete.Anti skid tiles for Khajaria/ Johnson/ Bell. (Department shall prove cemetn and conrtactor has to bring tiles and P.sand)

Providing and fixing 1st quality ceramic glazed wall tiles conformig to IS :15622 (thickness to be specified by the manufacture) of approved make, in all colours except burgundy, bottle green, black of any size as approved by Engineer in charge in skirting , riser of steps and dado over 12mm thick cement mortar 1:3 (1 cement, 3 P. sand)and joining withgrey slurrry @3.30 Kg per Sqm, including pointing in white demetn mixed with pigment of matching shade complete... Khajaria/ Johnson/ Bell glazed wall tiles size 300X450mm.. (Department shall provide cement and conrtactor has to bring tiles and P.sand)

Cement concrete flooring 1:2:4 (1cement, 2metal sand, 4 stone aggregate) finished with floating coat of neat cement, including cement slurry, but excluding the cost of noising of steps etc…complete...a) 40mm thick with 12.50 mm nominal size stone aggregate.( Labour Element)

Neat cement Punning..(Labour Element)

Providing edge mounlding to 18mm thick marble stone counters, ventities etc. including machine polishing to edge to give high gloss finish etc..complete as per design approved by Engineer in charge .Tile work ( Full cost)

Providing and fixing 18mm thick gang saw cut mirror polished (pre moulded and pre polished) machine cut for kitchen plat forms, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1cement : 4 P. sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc.complete at all levels. Granite of any colour and shade area of slab up to 0.50 sqm (Department shall provide cement . Contractor has to bring Granite and P. sand.

Providing edge moulding to 18mm thick marble Granite stone counters, ventities etc. including machine polishing to edge to give high gloss finish etc..complete as per design approved by Engineer in charge .Granite work ( Full cost)

Providing and applying white cement based wall putty of average thickness 2mm of approved brand and manufacture, over plastered surface to prepare the surface even and smooth complete. Birla white/ JK wall care/ Bison.(Full cost)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. Water thinnable cement primer.(Berger/Nerolac/Asian Paint) (Full Cost)

Finishing with Delux multi surface paint system for interior using primer as per manufacture specifications two or more coats applied on walls @ 1.25 ltr/10 sqm over including priming coat of .With Teflon (Royal coated) (Berger / Nerolac / Asian paint)(Full Cost)

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coat ( Berger / Nerolac / Asian paints)(Full Cost)

Pinting wood work with Delux multi surface paint to give an even shade.Two or more coats applied on @0.90ltr/10sqm over uner coat of primer applied @0.75ltr/10sqm of approved manufacture. ( Berger / Nerolac/ Asian paints).(Full Cost)

Finishing wall with water proofing cement paint of approved brand and manufacture of required shade on new work(two or more coats applied @ 3.84Kg/10 sqm).( Berger / Nerolac/ Asian paints).(Full cost)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes ,having thermal stebility for hot & cold water supply including all CPVC plain & brass threaded fittings,this included jointing of pipes & fittings with one step CPVC solvent cement,trenching ,refilling & testing of joints as per direction of Engineer in charge .(External work.(Class I SDR 11).(Full Cost)

a)15mm nominal bore

b)32mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes ,having thermal stebility for hot & cold water supply including all CPVC plain & brass threaded fittings,i/c fixing the pipes with clamps at1.00m spacing .This includes jointing of pipes and fittings with one step CPVC solvent cement,trenching ,refilling & testing of joints as per direction of Engineer in charge .(Concealed work including cutting chases and making good the walls etc..)(Class I SDR 11).(Full Cost)

b)20 mm nominal bore

Providing and fixing C.P Brass bib cock of approved quality and manufacture complete. conforming to IS 8931 (Cera / Hindware / Parryware).(Full Cost)

a)15mm nominal bore

Providing and fixing C.P.Brass stop cock (concealed) of standard design and of approved quality coforming to IS :8931.(Cera / Hindware / Parryware).(Full Cost)

a)15mm nominal bore

Providing and fixing CP brass Sink cock of approved quality and manufacture complete. 20 mm .(Cera / Hindware / Parryware).(Full Cost)

Providing and fixing health faucet of approved quality and manufacture complete. (Cera / Hindware / Parryware).(Full Cost)

Providing and fixing ball valve ( Brass ) of approved quality and manufacture complete.25 mm nominal bore (Zoloto/leader/ Orient).(Full Cost) 25 mm nominal bore

Providing and fixing nominal guage PVC Pipe of approved quality comple with special flang compression type fittings including trenching and re filling etc. External work .110 mm nominal bore ( 6 kg/sqcms)(prince/ supreme/ Fenolex). (Full Cost)

110mm Nominal bore

25mm nominal bore

32mm nominal bore

50mm nominal bore

63mm nominal bore

Providing and placing on terrace at floor level Polythene water storage tank ISI:12701 marked with cover and suitable locking arrangement and making necessery holes for inlet,outlet an over flow pipe but without fittings and the base support for tank .a) 1000Litre capacity. Syntex/ Ocian/ Acqua Tech) . (Full Cost)

Providing and fixing white vitour china water closet pedestal pan(European) type WC pans with plastic seat lis and rubber buffers ,15white vitrous china low level flusing system of approved make with fittings and brackets 40mm flush bend ,20mm over flow pipe with complte includding cutting and making good the walls and floors where requred .White EWC pan with plastic seat and lid(Jaquar or equivalent. ( Cera Conventional type Model No.2008 / Hindware / Parryware).(Full Cost)

Providing anfd fixing white vitrous china wash basin with RS OR CI brackets painted white ,15mm C.P brass pillar tap and C.P bras chain and rubber plug 32mm C.P brass wsate of standard pattern 32mm dia metre and waste pipe complete including cutting and making good with walls and floors where required ( Cera Cognac type Model No.1011/ Hindware / Parryware).(Full Cost)

White vitreous China Flat back wash basin 550x400mm with one 15mm C.P. brass pillar tap.

Providing and fixing white vitrous China laboratory sink with CI brackets painted white, 15mm C.P brass pillar tap and C.P brass chain and rubber plug 40mm brass waste of standrad pattern 40mm diametre and waste pipe complete including cutting and making good the walls where required. Kitchen sink with drain board 510x1040 mm bowl deth 250 mm (cera/ Hindware / Parryware).(Full Cost)

Providing and fixing Stailess steel AISI304(18/8) kitchen sink as perIS 13983 with CI brackets stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls where required.600x300mm cera/ Prince / Hindware).(Full Cost)

Providing and fiixng 600x450 mm mirror of superior glass (approved quality)complete with 6mm thick asbestos sheet ground fixed to wooden cleat with necessery screws and washers.(Cera. Model No.5567 Mirror size 600x300mm / Hindware / Parryware).(Full Cost)

Providing and fixing towel ring fixed to wooden cleat with CP brass screws and washers .150mm dia C P brasss towel ring with brackets, total dia 150mm weighing not less than 110gms.(cera/ Parryware/ Neycer).(Full Cost)

Providing and fixingstainless steel soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms..(Cera /Hindware/ Parryware. (Full Cost)

Providing and fixings PVC trap with grating of self cleansing design with screwed down or hinged grating with or without vent arm complete.Including cost of cutting and making good the walls and floors. 110mm . (Full Cost)

Providing and fixing on wall face PVC. soil waste and vent pipe 75 mm dia pipes. (6 Kg / cm2).(Prince / Supreme / Finolex). (Full Cost)

Providing and laying PVC pipes grade "A" with stiff mixture of 1:3 ( 1cement : 3 metal sand) including testing of joints etc .complete. (6kg/cm2). (Prince / Supreme / Finolex).(Full Cost)

a)110mm diametre

Providing and laying cement concrete 1:5:10 (1cement : 5 metal sand:10 graded stone aggregate 40mm nominal size)around the 15cm thick as per standard design excluding cost of centering, shutering and reinforcement. 100mm dia pipe.(6kg/cm2). (Prince / Supreme / Finolex).(Full Cost)

Providing and laying water treatment in sunken portion of WCs, bathroom etc..by applying cement slurry mixed with water proofing cemetn compound consisting of applying:a) First layer of cement @0.488Kg/sqm mixed with water proofing cement compound 0.253 Kg/ sqm. This layer will be allowed to air cure 4hours b)second layer of slurry of cement mixed with water proofing cement compound @0.126 Kg/sqm.this layer will be allowed to air for fhours followed andwith water curing for 48hours.The rate includes preperation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.(Full Cost)

Providing and laying water treatmenton roof slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:a) First layer of cement @0.488Kg/sqm mixed with water proofing cement compound 0.253 Kg/ sqm. b)laying second layer of Fibre glass cloth when the first layuer is sill green.Over laps of joints of fibre cloth should not be less than 10 cm.c) third layer of 1.5mm thickmness consisiting of slurry of cement @ 1.289 Kg/sqm mixed with water proofing cement compound @0.670Kg/sqm and coarse sand @1.289Kg/sqm.This will be allowed to air cure for 4Hours followed by water curing for 48hours.This will be allowed taken upto 30cm on prapet wall and tucked into groove in parapet all around .d)fourth and final layer of brick tilling with cement mortar(which will be paid seperaely).For the purpose of measurment the entire treated surface will be measured.(Full Cost)

HK MOHAMMED KASIM