Repair/Maintenance to various regulatory gates on distributaries of MRC in Marh area falling under the jurisdiction of MISD-1 Jammu.

Repair/Maintenance to various regulatory gates on distributaries of MRC in Marh area falling under the jurisdiction of MISD-1 Jammu.

Annual repair/maintenance of the below mentioned gates by way of repair to winch machines, providing/fitting of bearings wherever required as per sample, nuts and bolts, complete painting of the winch machines and gate leaves by scrubbing/removal of the old rust and then applying red oxide paint wherever required and anti corrosive enamel paints. Application of grease to the worm and pinion set of gears and on all sliding surfaces. Also replacement of rusted nuts/bolts as per requirement. Refitting of the winch machines and other parts at site and checking for smooth operation of the gates. a) Gate at Burj Feeder (3’-8”x3’-6”) -1no. b) Gate at Raipur-Bhadrore RD-1830 (8X3'-6") -1no. c) Gate of Raipur-Bhadrore RD- 760 (3’-8” x 3’-6’’) -1no. c) Gate of Giadla minor (5’-3” x 7’-2’’) -1no. d) Gate at Harnam Kund Flora Khul (5'-10"X4'-3")-1no. e) Escape Gate at Bani Head (5'-8"X3') -1no. f) Gate at Taru Chak (3’-3”x 3’) -1no. g) Gate at Karloop Khul (3’-9” x 5’-8”) -1no. h) Gate at Saharan Khul (4’-6’’ x 6’-2’’) -1no. i) Gate at new GhoManhasan headside (5’-8’’ x 3’) -1no. j) Gate at Bani head escape (10’ x 5’) -1no. Repair to the below mentioned gates on distributaries of main Ranbir Canal in Marh area. Job includes complete dismantling of existing winch machines from its installed position and then extraction of gates by means of chain pulley block, tripod stand and manual labour. Repair to the gates at site by means of cleaning of gates and removal of silt deposited on the gate leaves and then welding of broken joints, welding gate leaf at damaged places. Scrubbing/removal of old rust by using sand paper and applying one coat of red oxide and then applying two coats of anticorrosive paint on both side of the gates. Job also includes lowering the gate to its closed position inside the channel using chain pulley block and tripod stand and providing and fitting of new set of bearings, worm, nuts and bolts for mounting the gate on end of stem rod. Also straightening of the stem rod for its smooth operation. Job also includes greasing of worm and pinion set of gears of winch machine and on all sliding surfaces and then complete assembling of winch machine along with support lugs on the ISMC platform. Complete Job includes cost of material, tools and tackles charges, skilled/semi-skilled labour hire charges, hiring and carriage charges of welding set to site, hire charges of chain pulley block and tripod stand. a) Gate at 29000 Feeder Channel (6’-4”x7’) -1no. b) Saharan head Gate (6’x7’) -1no. c) RD-1900 New Ghou Manhasan Khul/Bhagatpur (5'X4') -1no. d) Gate near GHSS Gajansoo (4’-5’’ x 4’-5’’) -1no.

Rebate on Old Parts

ROYAL ENGINEERING ENTERPRISES (BID ID -2299467)

Vaibhav Engineers and Technocrates (BID ID -2304444)

AADISHWAR ELECTRICAL AND MECHANICAL WORKS