MISC REPAIR TO COMPOUND WALL, FENCING AND HARD STANDING IN AGE BR-I AREA

Amount

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 including demolition of brick masonry, built in cement mortar incl all quoins, arches, pillars, etc and removing of rubbish off the premises complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (using 40 mm graded stone aggregates) in foundations, filling and mass concrete including demolition of cement concrete of any description and in any position complete all as specified and directed.

M&L for RCC (design Mix) M-25 (using 20mm graded stone aggregates) as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc basement slabs, under reamed plies and mass concrete including demolition of reinforcement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for RCC (design Mix) M-25 (using 20mm graded stone aggregates) as in columns, pillars, piers,posts and struts and the like including demolition of reinforcement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for RCC (design Mix) M-25 (using 20mm graded stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span and the like including demolition of reinforcement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for form work to sides of concrete foundation , footings .base of columns,sides and soffits of plinth beams and similar works as in rough finshed flat surface complete all as specified and directed.

M&L for form work to sides and soffits of floor or roof beams,lintels,shelves and similar works as in rough finshed flat surface complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to lenth, bend to shape required, including cranking, bending, sprially for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed..

M&L for mild steel TMT bars 5mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed..

M&L for rendering 15mm thick cement plaster in cement mortar 1:4 on fair faces of brick /Concrete surfaces finishing the surfaces even and smooth with out using extra cement complete all as specified and directed and directed.

M&L for rendering 15mm thick cement plaster in cement mortar 1:4 on otherthan fair faces of brick / Concrete surfaces finishing the surfaces even and smooth with out using extra cement complete all as specified and directed and directed.

M&L for 10mm thick rendering on cement mortar 1:4 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed

M&L for prepration of newly plastered wall sufaces & applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer incl. of walls complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brick work, masonary, etc and making good disturbed ground complete all as specified and directed.

Excavating in post holes in any type of soil each not exc 0.5 Cum , getting out and removing surplus soil to a distance not exc 50 m and making good surface complete all as specified and directed..

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregates) as in foundation, filling, mass concrete, sub-floors, floors complete all as specified and directed.

M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular rough finished surface complete all as specified and directed.

S&F mild steel angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire , etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling bolting or riveting, etc, and similar work and similar conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required, includinig cranking, bending spirally for hooping of columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips quality confirming to Fe-410 W complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or sguare heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or screw nut n.exc 5 cm long dia of shank 12 mm complete all as specified and directed.

Supply only chain link mild steel galvaised fencing, any size or type complete all as specified and directed. Make:-TATA/SAIL/JINDAL

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire including dismantling of old rusted chain link fencing complete all as specified and directed.

M&L for preparation of newly steel and iron surfaces of any description exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of newly steel and iron surfaces of any description not exc 10cm in width or girth when connected with other painting, applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S&F in replacement Galvanised 2 strand steel barbed wire 2.24mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel wire, staples or steel pins, etc., (each line wire to be measured) complete all as specified and directed.

Surface exacavation not exceeding 30cm deep and average 15cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregates) as in coping, benching to hold to lower portion of chain link fencing complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floor of pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for hardcore of gauge not exc 63 mm, with broken stone or boulderes deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface complete all as specified & directed.

M&L for machine pressed precast cement concrete coloured chemically treated rubber moulded interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658 - 2006 of 60mm thick, M-35 grade complete all as specied and directed.

M&L for crushed quarry stone dust filing under floors or in foundation or cushion bed for paver blocks complete all as specified and directed

maharaja construction and suppliers

M/s Mohan Singh

anil kumar sahu

pal enterprises

M/S PRAKASH RAIKWAR TRADERS AND CO

EX SERVICE MEN SECURITY AND MAN POWER SERVICES

A Raza Enterprises