REPAIRS TO PLUMBING KITCHEN, BATH, WC, SUNKEN FLOOR AND CONNECTED WORKS INCLUDING SERVICE OF WATER TANKS OF AGE BR - I (ZONE - I) AT DINJAN MIL STN

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation, pipeline etc area not exceeding 10 Sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading in layers not exceeding 25cm, levelling, watering and well ramming as in hard/dense soil complete all as specified and as directed.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above starting point complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness. (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed.

M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed, etc including necessary form work complete all as specified and as directed.

M&L for RCC 1:1.5:3 (Nominal mix), type A1 (using 20 mm graded aggregates) as in slab staging for water tanks, hard standing, etc complete all as specified and as directed.

Use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizonal or sloping) for flat rough finished surfaces of concrete complete all as specified and as directed.

S&F for TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8mm dia and over ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for 40mm thick, PCC (1:2:4), type B-1 (using 20mm graded stone aggregate) as in sub base of floor etc and finished even and smooth without using extra cement complete all as specified and directed.

M&L for 38 mm wide, Aluminium dividing strips, 1.5mm thick, inserted in position, conform to design complete all as specified and directed.

Material and labour for water proofing treatment to sunken floor with the following course of treatment as specified below, all as per manufacturer’s instructions complete and all as directed by Engr-in-Charge :- (i) Cleaning top surface of floors/slabs and laying 50mm thick (avg) PCC of grade M10 (Nominal mix), mixed with WPC as per manufacturer’s instruction laid in slope 1:20 towards spouts including coveting corners. (ii) 15 mm thick screed bed in CM (1:4) on sides mixed with WPC as per manufacture’s instruction. (iii) Applying 1st layer of slurry of cement @ 0.488 kg/sqm mixed with acrylic based polymer modified Cementitous compound @ 0.253 kg/sqm. This layer shall be allowed to air cured for 4 hrs. (iv) Applying 2nd layer of slurry of cement @ 0.242 kg/sqm mixed with acrylic based polymer modified Cementitous compound @ 0.126 kg/sqm. This layer shall be allowed to air cured for 48 hrs. (v) Applying a coat of industrial bitumen 85/25 conforming to IS:3384:1986 penetration @ 1.50 kg/sqm on plastered and concrete surface. (iv) Providing 150 micron thick polyethene sheet in two layer (each 75 micron measured dry on dry surface over a coat of PU primer including preparation. (vii) 2 Nos 32mm bore GI medium grade 450mm long spout to be provided through external wall to drainout accumulated water. (viii) Sunken floor shall be tested for water tightness as specified at para 12.3 of PS. (ix) Sunken portion shall be filled with lean concrete of grade (1:3:6) type C-2 (using 40mm graded stone aggregate)

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified and as directed.

M&L for coloured glazed ceramic tiles in vertical surface of size 300X 200X 7 mm thick over 10 mm thick rendering in cement mortar in (1:4) as a backing coat, set and jointed in neat cement slurry and pointed in white or colour cement to match over complete all as specified and as directed.

M&L for coloured glazed ceramic tiles in vertical surface of size 450X 300X 7 mm thick over 10 mm thick rendering in cement mortar in (1:4) as a backing coat, set and jointed in neat cement slurry and pointed in white or colour cement to match over complete all as specified and as directed.

M&L for granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed

M&L for rendering 10 mm thick internal wall on fair faces of brick work or concrete surfaces in cement Mortar in 1:6 and finished even and smooth (without using extra lime or cement)complete all as specified and directed.

M&L for rendering 20 mm thick on fair faces of external wall of brick work or stone surfaces in two layers (10 mm thick each layer) in cement Mortar in 1:4 using water proofing compound in top layer as per manufacturer's instruction and finished the surface even and smooth without using extra lime or cement complete all as specified and directed. (Note: WPC shall be measured and paid separately as supply only)

Supply only Liquid water proofing compound for external wall plastering (for 5 mm thick plastering) complete all as specified and directed

M&L for rendering 5mm thick in cement mortor (1:3) on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surface of walls etc and applying three coats of white wash on walls complete all as specified and directed

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper of approved colour with roller over a coat of primer over and including 2mm thick wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces or previously undecorated surface of external walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or steel frames, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F for 3mm thick, Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.

Taking up or down 15mm bore existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and as directed.

Taking up or down 20mm bore existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and as directed.

Taking up or down 25 to 32 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Supply, laying, connection and testing, 15mm bore, steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and as directed.

Supply, laying, connection and testing, 20mm bore, steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and as directed.

Supply, laying, connection and testing, 25mm bore, steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and as directed.

Supply and laying, CPVC pipe of 16mm outer dia, SDR 11 pain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Supply and laying, CPVC pipe of 20mm outer dia, SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Supply and laying, CPVC pipe of 25mm outer dia, SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as

S&F 16mm outer dia, CPVC brass thread elbow complete all as specified and as directed.

S&F 16mm outer dia, CPVC brass thread Tee complete all as specified and as directed.

S&F 20mm outer dia, CPVC brass thread union complete all as specified and as directed.

S&F 25mm outer dia, CPVC brass thread union complete all as specified and as directed.

S&F 25mm outer dia, CPVC ball valve complete all as specified and as directed.

S&F 25mm outer dia, Tank adapter complete all as specified and as directed.

Dismantling water storage tank exc 250 & n.exc 500 ltr capacity and removing from site, complete all as specified and as directed.

Dismantling water storage tank exc 500 & n.exc 1000 ltr capacity and removing from site, complete all as specified and as directed.

Dismantling water storage tank exc 1000 & n.exc 2000 ltr capacity and removing from site, complete all as specified and as directed.

S&F for 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe including 20 mm bore, ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight - 210 gms) complete all as specified and as directed.

S&F for 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe including 20 mm bore, ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight - 210 gms) complete all as specified and as directed.

S&F for 2000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe including 20 mm bore, ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight - 210 gms) complete all as specified and as directed.

S&F in repairs 20 mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and as directed.

S&F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor using concrete (1:2:4) type B0 and to match with existing specifications complete all as specified and as directed. Make : Cat No. C0117 of Parryware/Hindware/Cera.

S&F in repairs, PVC low level flushing cistern, 10 litre capacity, valveless, symphonic action type with inlet, ball valve, float and handle incl bracket, PVC conection pipe and flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe including PVC seat and cover complete but excluding flushing cistern & flush pipe including making good to disturbed surfaces of floor using concrete (1:4:8) type D2 and to match with existing specifications complete all as specified and as directed.

S&F in repair vitreous china bowl urinal bowl type, of size 465x355x265mm, white (minimum) with grating and union for discharge pipe (excluding flushing cistern but including flush pipe & waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete complete as specified and as directed.

S&F in repairs vitreous china wash basin, size 550x400mm, white, flat back, including 32mm bore PVC (HDPE) waste pipe 450mm long, 32mm bore CP waste coupling, chain, plug and porcelain stopper & brackets including cutting for and pinning in ends of brackets but excluding tap complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth complete all as specified and directed.

S&F in repair 15 mm bore, bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferule complete all as specified and as directed.

S&F in repair 15 mm bore, stop valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repair 15 mm bore pillar taps, cast copper alloy, chromium plated, fancy type with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repair 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and as directed.

S&F in repairs brass chromium plated shower rose 125mm size with shower arm 15mm size 150mm long with bend, including fixing to steel pipe or union complete all as specified and as directed.

S&F in repair 20 mm bore, brass chromium plated, tubular towel rail, D type, 60 cm long between flanges with brackets complete all as specified and as directed.

S&F in repairs brass chromium plated, soap dish, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F in repairs 50mm bore, high density poly-ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed to wall, ceiling or in floors complete all as specified and as directed.

S&F in repairs PTMT(half or full threaded) waste coupling 32mm for sink (min weight 32mm - 45gms / 40mm- 60gms) complete all as specified and as directed.

S&F in repairs 32mm bore, Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F for grating doom, circular type, 100mm dia of PTMT, (mimimum weigh 25 gms) complete all as specified and as directed.

S&F in repairs toilet paper holder, brass, chromium plated , fixed to walls with (CP) brass screwscomplete all as specified and as directed.

S&F in repair, plastic water closet seat, back, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs stainless steel kitchen, sinks made of 1 mm thick sheet for kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm and bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F in repairs 15 mm bore, stop valves, fancy type, cast copper alloy, chromium plated, with long shank and cup ( concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs 75 mm bore, PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete all as specified and as directed.

S&F in repairs110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repairs 75mm PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F for 110 mm bore, PVC (SWR) bends of any radius complete all as specified and as directed.

S&F for 75 mm bore, PVC (SWR) bends of any radius complete all as specified and as directed.

S&F for 110 mm bore PVC (SWR) bends with access door any radius complete all as specified and as directed.

S&F for 75 mm bore PVC (SWR) bends with access door any radius complete all as specified and as directed.

S&F in repairs PVC (SWR) branch piece single (single Y) 110mm bore with access door complete all as specified and as directed.

S&F in repairs PVC (SWR) branch piece single (single Y) 75mm bore with access door complete all as specified and as directed.

S&F in repair 110mm PVC (SWR) WC connector with lip ring complete all as specified and as directed.

M&L for plain cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete for 150 mm bore drain pipes complete all as specified and as directed.

M&L for salt glazed stoneware drain pipes 150mm internal dia grade 'A' laid in trenches and jointed complete all as specified and as directed.

S&F in repair 125/110 mm dia outlet and minimum 50mm water seal, PVC (SWR) gully trap, with grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F in repairs sink mixer wall mounted with long arm complete all as specified and as directed.

S&F in repairs brass hand shower with hose and clutch complete all as specified and as directed.

S&F for 15mm dia two way bib cock complete all as specified and as directed.

S&F in repairs 15mm dia angular stop cock with flange complete all as specified and as directed.

S&F in repairs wall mixer 3-in-1 complete all as specified and as directed.

S&F in repairs basin mixer without pop up all complete as specified and as directed.

S&F in repairs Towel ring, cast copper alloy, fancy type, chromium plated, complete all as specified and as directed.

S&F in repair corner self complete all as specified and as directed.

S&F in repair chromium plated SS rain shower arm square size 24 ench complete all as specified and as directed.

S&F in repair stainless steel rain shower (without arm) square type size 300X300mm all as specified and as directed.

S&F in repairs New Magnum (combo set) white coloured urinal port size 380x400x590 complete all as specified and as directed.

S&F in repairs single piece white coloured EWC of size 620x350x725 complete all as specified and as directed.

S&F in repairs cromium plated standard Towel rack complete all as specified and as directed.

S&F in repair PVC mirror cabinet of size 440x325x120mm and fixed to wall complete all as specified and as directed.

S&F in repair S Décor stainless steel curtain finial with bracket (copper) with matching SS rod complete all as specified and as directed.

FREEZCON (BID ID -3101126)

M/S CHANDAN ENTERPRISE (BID ID -3101593)

Construction House (BID ID -3101993)

PAUL ENTERPRISE (BID ID -3101396)

STANDARD ELECTRIC WINDERS (BID ID -3101385)

MAZUMDAR ENTERPRISE (BID ID -3101249)