GE/ALP (8273B) KOLKATA OF 2023-24

Amount

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc.complete (upto four storiey bldg) all as specified and directed .

Taking down shutters of any description n. exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each and removing from site complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each and removing from site complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n .exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillers etc complete all as specified and directed .

Dismantiling of floor hearth or wall tiling including cement mortar (but not backing), and rubbish off the premises (out of MOD land), complete all as specified and directed .

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (up to four stories bldg) complete all as specified and as directed.

Dismantiling of asbestos cement ( Corrugated,semicorrugated, etc ) sheet in roof coverings and rubbish off the premises (out of MOD land), complete all as specified and directed.

Dismantling of timber scantling 40 sq.cm and over in section, in any postion framed work completed all as specified and directed .

M&L for anti- treatment for treating the bottom and sides of excavation at the rate of 5 ltrs of emulsion per sqm of surface area

Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan or to any radius in half brick work built in CM 1:4 complete all as specified and directed.

Material & labour for rendering 15mm thick in CM (1:4) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth complete (upto four storie bldgall) all as specified and directed.

Material & labour for 15 mm thick cement plaster 1:6 on fair faces of brick work or concrete surfaces (upto four storey high bldg )complete all as specified and directed.

M&L for rendering 10mm thick with CM (1:3) on or concrete surfaces and finished the surface even and smooth as in ceiling complete all as specified and directed .

Material & labour for preparation on new plastered surfaces of wall and applying two coats of anti-algae and anti-fungal exterior grade weather coat paint over a coat of primer (upto four storey bldg )complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer including 3mm thick wall care putty on wall complete all as specified and directed .

M&L for preparation of new plastered surface of ceiling and applying two coats of white wash on new surface etc, complete all as specified and directed .

M&L for preparation of old plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer including 3mm thick wall care putty on wall complete all as specified and directed.

Material & labour for preparation of old decorated surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds,etc and applying one coat of anti-algae and anti-fungal exterior grade weather coat paint (upto four storey bldg) complete all as specified and directed.

Material and labour for preparation of old steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer (upto four storey bldg)complete all as specified and directed .

M&L for 25mm thick PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in bedding of tiles/kota complete all as specified and directed .

Material and labour for non-skid ceramic coloured floor tiles as in floor 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and directed.

Material and labour for glazed ceramic tiles of size 450x300x7-8mm thick in verticle surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed.

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal complete all as specified and directed .

Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal complete all as specified and directed .

Supplying and laying for 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all fitting in any grade complete all as specified and directed

Supplying and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all fitting in any grade complete all as specified and directed

S&F in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and directed.

M&L for cutting chases, pinning, in making good to facing where required of of brick wall and pointing in cement motrar 1:3 to ends and cutting chases for concealed water tubing and concealed conduit wiring ete and making good surfaces complete all as specified and directed.

supply and fixing in repairs vitreous China wash basin ( white), flat back, size 580 x 450 mm including CP waste coupling 32mm dia excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and directed .

Supply and fixing in repair for 15mm bore Chromium Plated pillar tap fancy type cast copper alloy, with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair PVC connection 15 mm size pipe with PTMT nut of Length 450mm complete all as specified and directed.

Supply and fixing in repair 15mm bore bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed .

S&F in repair 15mm bore brass CP angular stop cock concealed type with crutch or butterfly handle complete all as specified and directed .

Supply and fixing in repair for 15mm bore stop valve, concealed type brass chromium plated, screwed down high pressure with crutch or butter fly handle screwed both ends fixed to GI pipe complete all as specified and directed .

S&F for 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified and directed.

S&F in repairs CP grating of 100mm dia, fixed with cement mortar (1:3).complete all as specified and as directed by Engineer-in-charge.

M&L for machine cut cuddapa stone slab 20 mm thick over cement screed base laid and jointed with grey ement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

M&L for granite slab 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, walls, window- cills, cooking platforms over screed bed/plaster 15 mm thick in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed .(upto 10 storey High of building)

Supply and Fix for curtain rods decorative aluminium alloy with fixing brackets including taking down old pelmet box making wood on wall complete all as specified. And directed. (upto 4 storey of building)

Supply and Fix for bracket decorative type for curtain rods aluminium alloy complete all as specified and directed. (upto 4 storey of building)

S&F for 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed including taking down existing water tanks and removing to store

S&F for water tank lid for 500/1000 Ltrs capacity PVC tank complete all as specified.

M&L for suspended false ceilling system using metalic exposed suspende system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimension 39 mm x 24mm x 0.80mm thick ( thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of Runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X 24mm x 0.8 mm thick wall angle 22.2mm x22.2mm x 0.65 mm thick ( thickness comprising of GI/0.35 + PPPCGS/0.3 mm & Weight of angle 0.70 kg for 3050 mm length) with and including 6 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid ( placed in the grid system duly suspended with 4 mm dia G I bars hangers fixed with steel dash through fasteners from purlins of the roof with necessary fittings and fixtures etc complete all as directed.

S&F for steel work in tubular truss and tubular post including special shaped washer etc .complete using ERW or induction butt welded tubes conforming IS:1161-1979 grade St-240

S&F for MS rolled section as in roof purlins, rafters and truss etc of MS pipe fixed with iron cleats along with nuts & bolts of required size or section or welded conforming to Fe-290 Gde E-165.

Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer (upto four storey bldg) complete all as specified and directed .

S&F for pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping srews all as specified and directed.

S&F for pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall for rain water pipe ,fixed with self tapping srews all as specified and directed.

Supply and fixing for powder coated aluminium sliding windows sliding on 3 tire frame of section 92mmX30mm X1.55mm and shutters of section 20mm X40mm X1.55mm fixed with 5mm thick coloured sheet glass/wiremesh with rubber gasket , handel lock, 'U' channel with including with all fittings etc and etc all as specified and directed.

Supply and fixing for stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel staples in steel/wooden /aluminium frames complete (upto four storied bldg) all as specified and directed .

Supply & fix for 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamferred put together with Glue, pinned at joints complete all as specified and directed.

Supply & fix for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F for 35mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauze ect (wihout sash bars), edge of framing plain, chamferred or rounded, fitted with cut and mitred beads for securing glass etc sizes of memebers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.

M&L for preparation of new or previous untreated wood and wood based surfaces of any description over 10 cm girth or width not otherwise described and applying two coats of Synthetic enamal paint over a coat of pink primer.

Material & labour for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in bed blocks for hold fasts including making good or disturbed portion with plaster to match with existing surface complete all as specified and directed .

S&F for Solid PVC mouded door frame of size 50mm x 47mm made out of 5mm Moulded/printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F for factory made solid panel PVC Moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face supply and fixing in frame

Supply & fix for 100mm long butt hinges medium weight, cold rolled mild steel complete all as specified and directed .

Supply & fix for 150 mm long aluminium anodised , barrel tower bolts of extruded section complete all as specified and directed.

Supply & fix for 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&Ffor aluminium alloy anodised sliding door bolts and hasp and staple (Bolt type) and fixing clips of sheets cast or extruded sections and fixing bolts and sliding bolts or extruded section of cast alum alloy and fixed length of bolt 300mm

S&Ffor aluminium alloy anodised sliding door bolts and hasp and staple (Bolt type) and fixing clips of sheets cast or extruded sections and fixing bolts and sliding bolts or extruded section ot cast alum alloy and fixed length of bolt 150 mm

Material & labour for framed work for such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-16.

S&F for 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and directed.

S&F for 110mm bore PVC(SWR) pipe bend single socket complete all as specified and as directed.

M & L for 75 mm thick type C-2 (1:3:6) (using 40 mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid in panels complete all as specified and directed..

Supply only Integral waterproofing compound

Excavation in trenches not exc 1.5 mtr wide and not exc. 1.5 mtr deep for foundation in soft/loose soil & getting out complete all as specified and directed.

Demoiltion and breaking up 150mm dia drain pipes (saltglazed, stoneware , AC or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches, complete all as specified and directed.

M&L for concrete bed for 150 mm bore pipe in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) to drain pipes including packing under, haunching against the sides of pipes complete all as specified and directed.

M&L for 150 SGSW drain pipes laid in trenches and jointed after and tested complete all as specified and directed.

Cutting into exisiting manholes 150mm dia for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed.

M&L for PCC 1:2:4 type B-1(using 20 mm graded stone aggregate) as in channels benching of manhole, laid to shape and slope, surfaces finished even and smooth using extra cement including necessary form work etc complete all as specified and directed.

M&L for providing PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping of manholes and similar work complete all as specified and directed.

Returning filling in trenches including spreading leveling and well ramming with water complete n.exc 25 cm thick in each layer in soft/loose soil complete all as specified and directed.

Removing exavated soil n.exc 50 mtr and depositing where directed at a leve n. exc 1.5 mtr above the starting point.

M&L for precast cement concrete type B-1 (1:2:4) (using 20mm graded aggregate) as in cover slab, shelves, and similar work set in CM (1:4).complete all as specified and directed.

M&L for mild steel TMT bars 8 to 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for 75 mm thick PCC 1:4:8 ,type D-2 (using 40mm graded stone aggregate) as in sub base all as specified and directed.

M&L for cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in lean concrete for foundation in drain,manholes etc all as specified and directed.

M&L for coloured rubber polished chequered tiles with grey cement and no pigment 30cm x 30 cm x 25mm thick , over and including 15mm thick screed bed in CM 1:6, set jointed and pointed in neat cement slurry in floors complete all as specified and directed.

M&L for providing factory made 75 mm thick precast RCC cover slab of 3 MT load bearing capacity confirming to IS : 12592 (Grade M-30) complete all as specified and directed.

Dismantling wrought iron or mild steel works of any description not otherwise provided for

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

M&L for cement concret(1:4:8) ,type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for 25mm thick damp proof coarse PCC(1:2:4) type B-0 to horizontal or vertical surfaces including necessary form work in

Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed.

Supply and fixing in repairs 15mm bore unplasticised PVC pipe of pressure rating 6 kgf/cm2 with all fittings fixed complete to wall and ceiling or laid in floors in short length complete all as specified and directed.

All as per item 93 above here-in-before but bore in 20 mm

All as per item 93 above here-in-before but bore in 25 mm

S & F in repair 125 mm size brass chromium plated shower rose including fixing to steel pipe or union complete all as specified and directed.

M&L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for anodised aluminium snap grid frame work for false ceiling all as specified and directed .

M&L for hanger 6mm dia GI (upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flate 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long complete all as specified and directed.

M&L for 12mm thick prelaminated parricle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and directed.

supply and fixing in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and directed.

S&F in repair vitreous china squatting pan of orissa pattern long pan of size 580 mm x 440mm with integral foot rest white with cast iron P or S trap with back inlet including flush pipe of suitable length to connection with existing cistern & make good complete all as specified and directed .

supply and fixing in repairs vitreous China wash basin ( white), flat back, size 580 x 450 mm including CP waste coupling 32mm dia excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and directed.

S&F in repai brass CP mixer valve cock for mixing hot & cold water screwed down for iron pipe 15 mm dia including telephone shower all as directed and specified .

S&F for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass scews, ponting around urinal back in cement; incliding connection to flushing pipe and outgoing pipes fixed in repair all as specified and directed.

supply and fixing in repair 32mm dia flexible PVC waste pipe for basin etc complete all as specified and directed .

Material & labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distember over a coat of primer over 3mm thick wall care putty as specified and directed.

Material & labour for preparation on new plastered surfaces of wall and applying two coats of anti-algae and anti-fungal exterior grade weather coat paint over a coat of primer (upto four storey bldg )complete all as specified and directed.

M & L for 75 mm thick type C-2 (1:3:6) (using 40 mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid in panels complete all as specified.

Preparation of new surface of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified.

S&F for 75mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and directed.

S&F for 75mm bore PVC(SWR) pipe bend single socket complete all as specified and directed.

S&F for 110mm bore PVC(SWR) pipe bend single socket complete all as specified and directed .

S&F in repair CI Nahani trap of 100mm dia, including jointing to waste pipe fixed in cement concrete, (1:2:4) type B1 ( using 20 mm graded crushed stone aggregate)complete all as specified and directed.

M&L for machine preesed precast concrete glazed interlocking paver block any shape and size over sand/stone dust cusion confirming to IS 15658-2006 of 60mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed.

Supply only sand for cusion below paver block for levelling complete all as specified and directed.

Taking down of steel window with guard bar complete all as specified and directed.

Chipping of unsound/weak concrete materials from slabs , lintel,chajja, fin, facia etc. by any means as directed by engr-in-charge including tapering all edges, making square shoulders of cavities air or sand blasting etc and cleaning of exposed concrete surface of lightly picking materials by air blasting or sand blasting incl foreign matrials , loose concrete/aggregate etc and disposal of all debris out of MOD land (upto four storey bldg) for 25mm average thickness. complete all as specified and directed.

All as per item No 118 deduct/add for every less/extra 5mm thick.

M&L for removing of concrete all around reinforcement including from behind the reinforcing bars to give an avrage 25 mm (but not less than 15 mm clear air gap) by manual methods (using wire brushing, chiselling etc) and applying alkaline rust removing chemical followed by removing rust by emery paper and cleaning the area throughly by water and allow it to dry all as per manufacturer,s instruction to give it a totally rust free finished steel surface upto four storey bldg complete all as specified and directed by Engr-in-charge (Make: SIKA/FOSROC) upto 12 mm dia bar.

All as per Item 120 above but for above 12mm dia barscomplete all as specified and directed .

Supply and application of coat of Epoxy Zinc rich primer on the prepared steel surface excluding behind the bar by brush the primer shall have a minimium specific gravity 1.75 minimum weight film thickness/coat 40 microns and minimum adhesive bond strength with steel is 1.5N/mm2 upto four storie bldgcomplete all as specified and directed .. Make: SIKA/FOSROC.

M&L for introducing new reinforcement bars for structural connections in RCC Bram, Lintels, Columns and slabs uncluding power drilling holes of appropriate diameter in reinforced of plain cement concrete to a minimum depth of 150 mm and upto 200 mm including power drilling , fixed the reinforcement in position using epoxy of loose dust by blowing air, sealing with epoxy cartridges etc upto four storey bldg all as spd and directed.

M&L for introducing new reinforcement bars for structural connections in RCC Bram, Lintels, Columns and slabs uncluding power drilling holes of appropriate diameter in reinforced of plain cement concrete to a minimum depth of 150 mm and upto 200 mm including power drilling , fixed the reinforcement in position using epoxy of loose dust by blowing air, sealing with epoxy cartridges etc upto four storey bldg all as spd and directed.

M&L for providing and placing in position free flow non shrink cementitious micro concrete of Grade of M-50 to the effected beam, etc . The micro concrete shall have a minimium 1 day compressive strength of 10 Mpa and 28 days strength of 50 Mpa, minium tensile strength 5N/mm2 @ 28 days, minimium flextural strength 5N/mm2 @ 28days and complete all as spd and dir by Engr-in-charge.( Make: SIKA/FOSROC/ELANTAS BECK/KUNAL CONCHEM) 50 mm average thickness of Beam, upto four storey High.

Supply, mixing and application two component structural grade polymer modified reinstatement morter, where local spalling has taken place or shuttering is not possible . The morter can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimium flexural strength 6.5N/mm2 complete all as spd and directed by the Engr-in-charge upto 25 mm average thickness and upto four storey High. Make :- Sika/Fosroc NOTE:- Cement and sand morter in proportion of 1:2 graded coarse sand ) with polymer admixed in proportions approved by Engr-in-charge)

M&L for applying curring compound or equivalent, complete all as specified and directed. Over concrete surface as curing compound as per manufactures instructions, (upto ten storey building )complete all as specified and directed.

Supply and fixing of new TMT bars upto 12 mm dia of approved brand of requiste diameter by electro welding of length 2.5 to 5 d on both the side with the existing bar to require size and shape at the portion where the existing reinforcement has lost helf of its sectional area following by a coat of epoxy zinc primer sa per the descripetion mentioned , (upto four storey building ) complete all as specified and directed.

Material & labour for rendering 5mm thick with CM (1:3) on or concrete surfaces and finished the surface even and smooth as in ceiling (upto four storie bldg) complete all as specified and directed.

Preparation of new surface of ceiling and applying three coats of white wash complete all as specified.

M & L for coloured Non Skid ceramic tiles 7 to 8 mm thick, (Square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including Screed bed or bedding layer or mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified.

All as per item No 131 above but over 10 mm thick plater in CM 1:6 complete all as specified.

M&L for surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in in Soft loose soil

M&L for broken stone boulders Hard core, broken to gauge n exc 63 mm,deposited,spread and levelled in layered n.exc. 15cm thick, watered and rammed to a true surfaces complete.

Material and Labour for pre-polished cement concrete designed coloured pavement tiles glossy finish of size not less than 400 x 400 x 20mm thick or equivalent size as in floor set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles and laid over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Material and labourGranite (of any type) tiles 10mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishingin steps, jambs, pillars, window- cills,cooking platforms and tree guard over 10 screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade etc complete all as specified

Dismantling Stone slabs and tiles of any description or thickness in floors, apronsm paved laid dry or laid dry and pointed etc complete all as specified and directed.

Material and Labour for Preparation of old plasteded surface of walls and applying one coat of cement base paint including necessary working platform complete all as specified and as directed.

Material and Labour for from work edges of concrete not 10 cm but n.exc 20 mm in rough finished surface.

M&L for RCC (1:2:4) type B 1( using 20 mm graded stone agg) in roof slab supported as wall, slab to shelves and the like complete all as specified and directed.

M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggte) as in roof beams, lintels etc complete all as specified and directed.

All as per item No 23 above but 5 mm dia and over upto and including 10 mm dia as in stirrups and spacer, binder etc.

M & L for machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for grinding and polishing of existing kota stone in floors like mirror polish complete all as specified and directed.

M&L for rendering 10mm thick in CM (1:6) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement to match the existing surface all complete all as specified and directed.(upto 04 storey High of building)

M&L for 10 mm thick cement plaster on ceiling in cement mortar (1:3) on of brick work, finished the surface even and fair with out using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface and applying three coats of white wash on ceiling l complete all as specified and directed.

M&L for preparation of old surface and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of old decorated surface and applying one coat of oil emulsion distemper including preparation of old sufaces of wall etc complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light,fan,socket etc.) complete including fittings such as switch, ceiling rose, light fittings, regulators etc. and making good to the disturbed surface of walls, floors etc. complete all as specified and directed.

M&L as in repair / replacement for point wiring for one light/ bell/ fan controlled by one number one way switch complete with 1100 V grade FRLSH PVC insulated multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through and including PVC concealed conduit pipe of suitable size minimum 20mm dia medium grade (ISI Marked) complete with one run of 1100 V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly including provn of MS sheet pressed sunken box not less than 1.12 mm thick concealed on wall, with 3 mm thick laminated sheet top cover ISI marked (Make: Hylum/Anchor/Orient) for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed. Note : Proper colour code of wiring to be maintained.

All as per item No. 151 above but for 5 Amps socket on same board complete all as specified and directed.

All as per item No. 151 above but for 5 A socket point on independent board complete all as specified and directed.

All as per item No. 151 above but for 15 A socket point independent with 2.5 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and directed.

S & F for ceiling rose, 3 terminal, PVC/ polycarbonate isolated body, 230 V complete all as specified and directed.

S & F for piano switch flush type single pole one way 5 Amps, 230 V complete all as specified and directed.

S & F for socket outlet 2 in 1, 3 pin, 6A complete all as specified and directed.

S & F for socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type complete all as specified and directed.

S & F for switch piano flush type, single pole one way 15 Amps, 230 V complete all as specified and directed.

S&F for LED tube light fitting 4 ft 20 watt, 230 volt energy efficient comprises of extruded PVC housing, with inbuilt driver and PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make: Magik (CAT No- BWUA020C1293)/Crompton

Supply and fixing for LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix for SPN MCB DB 8 way with Amps rated copper bus bar, neutral link, suitable for mounting MCB's 240 volts double door type including taking down old one and making good the disturbed surface complete all as specified and directed. Make : ABB /Legrand/ Havells/L&T/Schineider.

Supply and fixing for MCB 06 Amps to 32 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed. Make : C&S /Legrand/ Havells/L&T.

Supply and fixing for MCB 06 Amps to 32 Amps, single pole, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and directed. Make : C&S /Legrand/ Havells/L&T.

Material and labour for circuit/sub-main wiring with two runs of 1100 V grade PVC insulated & unsheathed 4.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 4.0 sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through concealed PVC conduit complete all as specified and as directed. Note : (i) Three runs of 4.0 Sqmm cable and PVC conduit shall measured as one length.

Supply and fixinvg for electronic ceiling fan regulator 2 module stepped type ,flush type suitable for 230 Volt AC complete all as specified and directed .

Supply and fix for SPN MCB DB 4 way with Amps rated copper bus bar, neutral link, suitable for mounting MCB's 240 volts double door type including taking down old one and making good the disturbed surface complete all as specified and directed. Make : ABB /Legrand/ Havells/L&T/Schineider.

Taking down carefully old LED light fittings and keep it in safe custody and refixing on completion of wring properly on the existing place or as per site requirment complete all as specified and directed.

Shanti Construction Company

PUTUL CONSTRUCTION CO.

TOTCO

ESS PEE UDYOG

RADHA ENTERPRISE

P N GUPTA AND SONS

ARATI TRADING CO