REPAIR, CLEANING OF SEWAGE LINE,MANHOLE, SEPTIC TANK AND ALLIED WORKS UNDER AGE BR-I OF GE (AF) ADM AREA AT AF STN, AGRA.

Amount

M&L for dewatering of sludge water from septic tank, soakwell, manholes, oxidation pond etc including removing loose liquid meet as grass and vegitation etc by means of mechanical power transport or by manually with sanitable bucket etc under foul conditions and removed exc 200mtr and not exc. 500 mtr and buried under ground complete all as specified and directed.

M&L for desilting of sludge from exisitng septic tank, soakwell, manholes, oxidation pond etc by mechanically or manually and removing of sludge/debris etc to a distance upto 5 km outside the MOD land and burried underground working in foul condition complete all as specified and directed.

M&L for Cleaning/clearing sewage line upto 250mm bore of any type and any location manually or by way of any means by taking of sludge water/night soil, silt and finally cleaning the sewage line by roding or flushing of water to remove all stacking inside the pipe including cutting to vegatation, bushes and grass etc to facilitate the work and also removing and refixing the manhole covers etc complete all as specified and directed. Note :- The rate of cutting of vegatation, bushes and grass around sewage line shall be deemed included in quoted rate.

M&L for Cleaning of MH up to 1.50m deep and taking out sludge, night soil, sludge water etc manually and removing the same to a distance upto 5km outside of MoD land and burried under ground working in foul condition complete all as specified and directed. Note :- The rate of cutting of vegatation, bushes and grass around manhole up to 1.00 m distancee shall be deemed included in quoted rate.

Ditto- all as per item No-04 above but exc. 1.50m and not exc. 3.00 mtr deep.

M&L for Cleaning of blockage W.C (E type) or (I type) by opening inspection door bend and using Roding/pressure techinque to clear blockage complete all as specified and directed.

M&L for Cleaning /desludging of existing sewer line from nahni trap/gully trap to 1st manhole manually or by way of any other suitable mechanical means of any capacity and depth including taking out sludge in any form and keeping the sewer line functional by roding/pressure complete all as specified and directed.

M&L for Cleaning of blockage/choked floor trap by roding/pressure/pumping complete all as specified and directed.

M&L for Cleaning and desludging of drains avg depth of debris/sludge not exceeding 450mm including removing out all debris/earth/building mtrl/rubbish and bushes from the drain for smooth functioning and disposal of debris upto 100m distance complete all as specified and directed.

Cleaning and opening of road/path culvert of length not exc 10 m and cross sectional area not exc. 2 Sqm including removing out all debris/ sludge/ earth/ building material/ rubbish and leaves/grass/bushes from the culvert and disposal of debris in low lying area complete all as specified and directed.

Cleaning and opening of roadside drainage pipe of any dia and removing debries out sidee the MOD land and disposal of debris in low lying area complete all as specified and directed.

Demolition and breaking up 150mm bore drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar and removing and depositing the debris to a distance not exc 50m complete all as specified and directed. Note :- The rate of cutting of vegatation, bushes and grass around sewage line shall be deemed included in quoted rate.

Demolition and breaking up 200mm bore drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar and removing and depositing the debris to a distance not exc. 50m complete all as specified and directed. Note :- The rate of cutting of vegatation, bushes and grass around sewage line shall be deemed included in quoted rate.

M&L for Salt glazed stone ware drain pipes grade 'A' internal dia of pipe 150 mm laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed.

M&L for Salt glazed stone ware drain pipes grade 'A' internal dia of pipe 200 mm laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed.

M&L cement Concrete bed to drain pipes including packing under and completely surronding pipes after they are laid and tested in cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) bore of pipe is 150 mm complete all as specified and directed .

Excavation in trenches not exceeding 1.5 mtr wide and not exc. 1.5 mtr in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, sewage lines, etc. not exceeding 10 Sqm on plan and getting out in soft /loose soil complete all as specified and directed .

Excavation in trenches exceeding 1.5 mtr wide and not exc. 3mtr in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, sewage lines, etc. not exceeding 10 Sqm on plan and getting out in soft /loose soil complete all as specified and directed .

Returning, filling in including spreading, levelling watering and well ramming in leyers not exc. 25cm each layer in soil complete all as specified and directed.

Removing surplus soil not exc. 50 mtr away deposited where directed not exc. 1.50 mtr high from the starting point complete all as specified and directed .

M&L for Brick work with sub class 'B' bricks straight or curved on plan exceeding 6 m mean radius with old size bricks built in cement mortar 1:4 including demolition of brickwork or stone boulders masonry built in CM for foundation etc or for shafts, walls cesspits, manholes etc complete all as specified and directed.

S&F in repairs salt glazed stone ware gulley traps, square or round mouthed type 'P' of size 180 mm x 150 mm complete all as specified and directed.

Taking down cement plaster on brick wall including racking out joints, hacking for key, scrrubing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound @ 200ml per 50 Kg cement including finished even and smooth without using extra cement complete all as specified and directed. Note: Rate of WPC will be deeemed tobe included in this item.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping benching for manholes etc including weathering slighting rounded or chamfered angles and throuting including necessary formwork complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc (Inner girth only measured) complete all as specified and directed by Engr-in-Charge.

M&L for precast cement concrete type B1 (using 20 mm graded stone aggregate) as in manhole cover of any section with plain fair faces including chamfers, weatherings, throating etc and setting in cement mortar 1:4 complete with joints to match including demolition of RCC Manhole covers, slabs etc of any description and in any position complete all as specified and directed .

S&F for TMT bars 10 mm dia and over, cut to length bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Ditto-all as per item no-28 above but 6 mm to 8 mm dia, quality confirming to Fe 410-S or Fe 410-0

Cutting into existing manholes for connect in new drains making good to pipe and rendering cutting out existing benching for and forming branch channel ½ round or ¾ section in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 150mm complete all as specified and directed.

M&L for plain cement concrete type C-2 1:3:6 (40 mm graded aggregate) as in plinth protection 75mm thick including demolition of existing PCC of any description and in any position complete all as specified and directed .

S&F PVC SWR pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall including taking down existing pipe (any size or pattern ) including all fittings , etc complete all as specified and directed .

S&F PVC SWR pipes 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floor with necessary earthwork including taking down existing pipe (any size or pattern ) including all fittings , etc complete all as specified and directed .

S & F PVC SWR pipes 75mm bore single socketed in any length with rubber ring joints fixed to wall including taking down existing pipe (any size or pattern ) including all fittings , etc complete all as specified and directed .

S & F PVC SWR pipes 75mm bore single socketed in any length with rubber ring joints, laid in trenches or in floor including taking down existing pipe (any size or pattern ) including all fittings , etc complete all as specified and directed .

S&F in repair PVC (SWR), junction single, (Single T) equal or unequal 110mm dia complete all as specified and directed .

S&F in repair PVC (SWR) vent cowl 110mm dia complete all as specified and directed .

S&F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed .

S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed .

GIRENDRA SINGH AND CO (BID ID -3063730)

M/S SINGH ELECTRIC CO (BID ID -3071835)

SANJDHEERA CONSTRUCTION (BID ID -3059576)

deva engineers (BID ID -3061286)

V K CONTRACTOR (BID ID -3059646)

C P Singh and Co (BID ID -3072328)

rohan traders (BID ID -3071551)

jmd engineers (BID ID -3055878)

ASHISH SHARMA (BID ID -3063597)