Construction of DDL Balasore on the 1st floor of existing building Vetenary office, Remuna at District of Balasore for the year 2026-27

Earth work excavation foundation in hard soil trenches within 50 meter initial leadand 1.5mt. Intial lift including rough dressing and levelling the bedincluding all labour, T&P etc. complete as directed by the Engineer in Charge.

Providing Single under-reamed Piles foundation of 300 mm dia. 6.0m long with R.C.C M-20 using 12 mm size black hard granite (Crusher Broken) stone chips including cost of boring , but excluding cost of M.S rods /Tor steels and labour charges for cutting bending and binding of steel and T&P required for the work etc. complete as directed by the Engineer-in-Charge.

Supplying & Filling foundation and plinth with sand well watered and rammed including cost, conveyance, Royalities, Taxes of all materials,all labours & T&P required for the work complete ( measurement will be takenon finished compacted section only)as perthe direction of Engineer-in-Charge.

Cement concrete (1:3:6) using approved quality from approved quarry including lowering laying concrete watering and curing etc. as required levels laid in layers not exceeding(0'-6'') 15 cm thick including cost, conveyance,royalities of all materials and cost of all labour ,T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge .

Fly Ash brick masonry in cement mortar (1:6) in foundation and plinth using Fly Ash bricks of size 25cm x 12cm x 8cm 75 kg/cm2 with dimensional tolerance 8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge.

Fly Ash brick masonry in cement mortar (1:6) in Superstructure using Fly Ash bricks of size 25cm x 12cm x 8cm 75 kg/cm2 with dimensional tolerance 8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge.

F. Floor

R.C.C. work M-20 in grade having a minimum compressive strength (in work test) 200 kg/cm2 in 15cm cubes at 28 days using 12mm. & down grade hard granite C.B. chips of approved quality and from approved quarry including watering, lowering laying concrete, compacting with vibrators, curing for 28 days with smooth centering and shuttering and finishing the exposed surface including cost conveyance, royalties of all materials, cost of labour & T&P rand other machinsries required for the work complete but excluding cost and carriage of HYSD bars and cost of bending, binding tying the grills and etc. as per specification & direction of the Engineer-in-charge Pile Cap

Column

F. Floor