SPECIAL REPAIR TO BLDG NO P-27 (TYPE-III JCO QUARTERS) AT CQAE (WE) BANGALORE UNDER GE(AF)YELAHANKA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3kg of cement per sqm

M&L for non skid coloured ceramic tiles 7 to 8 mm thick matt finish(square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including screed bed 15 mm thick in CM 1:6 complete all as directed and specified.

M&L for Glazed coloured Ceramic tiles of size 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dado over 10 mm thick rendering in CM 1:4 finished all as specified and directed in toilets and kitchen.

M&L for Non skid coloured Ceramic tiles 7 to 8 mm thick and area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm as in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed all as specified.

M&L for Granite(of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over 20mm thick screed bed in CM 1:6 all as specified and directed.

Rounding to edges of granite slab such as cooking platform all as specified and directed.

Demolition of cement concrete in ground floors and pavings nexc 15cm thickness (below or above ground level).

M&L for 75 mm thick cement concrete 1:2:4, type B-2 using 40 mm graded stone aggregate for plinth protection complete all as specified.

M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’thickness of slab 100mm below.

Taking down cement plaster from brick or stone walls etc , including raking out joints, hacking for key, scrubbing down with water, etc. walls of any description all as specified and directed.

Demolition of brick work or stone masonry built in CM including all quoins all as specified

Demolition of reinforced cement concrete in any description and in any position not otherwise specifically provided for.

M&L for brick work with sub class 'B' bricks,straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks , straight or curved on plan to any radius built in CM 1:4 in half brick thick complete all as specified and directed.

M&L for 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces and finish the surface even & smooth without using extra cement on internal walls complete all as specified.

M&L for 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces and finish the surface even & smooth without using extra cement on external walls complete all as specified.

M&L for keyed pointing in Cement mortar 1:4 to random or polygonal rubble masonry all as specified and directed.

M&L for preparing the new surfaces of wall and applying two coats of oil bound distemper over a coat of interior wall care putty 3mm thick all as specified and as directed

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint on walls including priming with alkali resistant priming paint etc complete all as specified and directed.

M&L for Complete removal of existing wall surface finish and applying two coats of OBD over a coat of 3mm thick wall care putty all as specified and directed

M&L for preparation of old wall surfaces and applying two coats of White wash all as specified and directed.

M&L for complete removal of existing surface finish and applying two coats of OBD over a coat of primer in ceiling all as specified and directed

M&L for preparing old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of Synthetic enamel Paint all as specified and directed.

M&L for preparing old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of Synthetic enamel paint all as specified and directed.

M&L for one coat of exterior paint to old decorated surfaces of wall ,floor, interlocking & chequered tile including preparation of surfaces complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F 20 mm dia of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified.

Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F CPVC pipes 25 mm DIA SDR 11 & Plain VPVC SDR 11 fittings on walls/, ceiling or laying including fitting in floors all as specified and as directed by Engr in Charge.

S&F in repair gun metal gate valve 20 mm bore with iron wheel head, secrwed both ends for iron pipes complete all as specified.

S&F in repair gun metal gate valve 25 mm bore with iron wheel head, secrwed both ends for iron pipes complete all as specified.

S&F in repairs vitreous China squatting pan 'orrisa' pattern white coloured of size 580x440mm white with integral foot rests including provision of lime concrete complete all as specified & directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed.

S&F plastic pedestal pattern seat cover black closed pattern with flat bottom and cover and MS chormium plated hinging device all as specified and directed.

S&F in repairs 10 litre capacity PVC syphonic action type low level flushing cistern white with inlet, ball valve,float and handle including brackets, all fittings and flushing pipe fixed in repair all as specified and as directed.

S&F in repairs vitreous china wash basin, white coloured flat back, size 550 x 400 mm including brackets all as specified and as directed .

S&F in repairs Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” with long screwed shanks and fly nuts ,screwed for iron pipe and fixed completed all as specified.

S&F in repairs Bib taps chromium plated 15 mm with fancy type with capstan heads,screwed down high pressure with crutch or butterfly handle ,screwed both ends for iron pipe or for unions complete all as specified.

S&F in repairs 15mm dia, concealed type chromium plated fancy type with long shank and cup screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified.

S&F in repairs 15 mm dia two way bib taps (fancy type), cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge. Make:Cera Model F3002152 or its equivalent.

S&F in repairs 15mm dia angle valves, cast copper alloy, CP, screwed down, high pressure, with crutch, screwed both ends for iron pipe or for unions all as specified.

S&F in repair Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm all as specified and directed.

S&F in repair sink cock fancy type complete all as specified and (table mounted)with 215 mm swivel spout complete all as specified and as directed. Make - Cera F2003302 or its equivalent.

S&F Towel Rack with lower hanger (stainless steel), fixed with screws , complete all as specified and directed. Make : Jaguar ( Code No AHS-1581H) or its equivalent.

Supply and fix PVC Cabinet mirror all as specified . Make :Prayag or equivalent.

S& F in repair Brass chromium plated shower rose 125mm with or without swivel joints any size, including fixing to steel pipe or union of 15mm bore all as specified and directed.

S&F in repairs CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange as specified and as directed.

Supply and Fixing in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed .

Supply and Fixing of 32/40mm waste pipe for wash hand basin and sink all as specified and as directed

S&F in repair PTMT towel rail (Minimum weight 190grms) 600 mm long fixed with and including chromium plated brass screws and wooden /plastic cleats.

S&F corner glass shelf with assy of CP and fixed with Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.(Minium weight 105 grms).

S&F CP Towel ring fixed with and including Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.

S&F stainless steel Soap dish fix to wall all as directed and specified.

S&F Corner glass shelf large, 300x300mm of cera all as specified and directed.

S&F glass shelf of size 12 cm wide x 60cm long for wash hand basin of cera all as specified.

S&F in repairs brass CP Health faucet with 1.20m long flexible pipe and wall hook complete all as specified and directed.

S&F Stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr .

S&F PVC floor trap 75mm dia,plain with grating including jointing to waste pipe fixed in cement concrete (1:2:4),type B1 using 20mm graded stone aggregate.

S&F PVC(SWR) Pipes 110mm dia single soketed, in any length with rubber ring joints, laid in trenches or in floors

S&F PVC (SWR) bends 110 mm dia in any radius with access door etc.

S&F PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints, laid in trenches or in floors and walls.

S&F PVC (SWR) bends 75 mm dia in any radius with access etc.

S&F PVC (SWR) 75mm dia junction (single 'T') equal or unequal with access door etc.

S&F CP grating size 100mm fixed with white cement all as specified.

S&F in repairs rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 ltr capacity hoisted and fixed in position including screw type lid and all accessories all as specified in SSR Pt - I including dismantling old tank and removing to store.

S&F in repair 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass in repair.

S&F in repair PTMT Nipple 25 mm suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) .

S&F in repair PTMT Nipple 20 mm suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms).

Taking down chowkats or frames with shutter not exceeding 1.5 sqm (without taking off shutters from the frame) of any description

Taking down chowkats or frames with shutter exceeding 1.5 sqm but not exceeding 4 sqm (without taking off shutters from the frame) of any description

M&L for taking down shuttes of any description exc 1 Sqm and n.exc 2 Sqm, as in cupboard shutters all as specified and directed.

M&L for taking down shuttes of any description exc 1sqm and n exc 2sqm each and refixing in the same opening all as specified and directed.

S&F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

Cutting holes in brick walls built in CM for inserting hold fasts and making good dismantled portion in CM 1:3 or PCC 1:2:4,type B1 using 12.5 mm graded aggregate ¸depth of embedded portion of hold fast not exceeding half brick.

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, suppling & fixing edges will be painted to match with prelam sheet all as specified and directed.

M&L for Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including neccessary fitiings etc complete as specified and directed.

S&F powder coated aluminium frame with all fixing arrangements for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc minimum thickness of powder coating not less than 50 micron all as specified and directed.

S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1No.) complete all as specified.

S&F flush door 30mm thick membrane doors decorative finish on one side duly finished and polished, other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings of necessary all as directed by Engr - In Charge.Make:Maxon or equivalent.

S&F fly proof door 30mm thick membrane doors decorative finish on one side duly finished and polished, other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings of necessary all as directed by Engr - In Charge. Make:Maxon or equivalent.

S&F 35mm thick 2 nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares,with plain,chamfered or rounded,mitred and rebated sash bars,any numbers.edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats.

S&F for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 all as specified and directed.

S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets , cast or extruded sections and fixing bolt and sliding bolts of extruded sections.

S&F for aluminium anodised, barrel tower bolt 150mm of extruded section.

S&F for aluminium handle 150mm cast type anodised.

Supply and fix floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor,over all legth of cover plate 150 mm.

S&F brass 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F in repair prelaminated particle board,19 mm thick interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work complete all as specified.

S&F Continuous(piano) hinges,brass,bright finish of electrogalvanised 40 mm width of flap.

S&F Cover fillets of standard 6 mm thick hard board, 40mm wide,and fixing with screws.

M&L for preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane fixed with aluminium window and ventilator all as directed by Engineer-in-Charge

All as per item 98 above but figured glass pin head type.

S&F sheet glass ordinary quality 4mm thick as in doors,window, showcase in aluminium frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprime gasket all as directed by Engineer-in-Charge

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165.

M&L for preparing new steel surfaces of any description over 10cm in width or girth , not otherwise described and applying two coats of Synthetic enamel Paint over a coat of red oxide primer all as specified and directed.

S&F aluminium powder coated drapery rod 32mm dia including suitable fancy type suitable brackets on both ends fixed over 1st class hard wood rounded wooden blocks of 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws including necesary drilling & finished with polishing. Each opening shall have two fillets at both ends.

S&F aluminium powder coated fancy type suitable brackets fixed at both ends of openings fixed over 1st class hard wood rounded wooden blocks of 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws incl necesary drilling & finished with polishing. Each opening shall have two fillets at both ends.

M&L for 20 mm thick Plastic kitchen cabinet with all accessories (Handle,Piano hinges,Magnet catcher telescopic channel etc Including 6mm thick plastic sheet back side of the kitchen cabinet of Make :Sintex or Equivalent)

S&F SS Bucket 48 cm x 50 cm x 10 cm

S&F SS Bucket 48 cm x 50 cm x 15 cm

S&F SS Bucket 48 cm x 50 cm x 20cm

M&L for removing the existing unserviceable tar felt or any type of felt of any description from roof slab alongwith screed bed, including cleaning the surface & removing the debris to a distance exc 250m and n.exc 500m, etc complete all as specified & directed.

Material and labour for rendering 15mm thick (average) in cement mortar 1:4 on roof surfaces mixed with water proofing compound as per manufacturer's instructions, finished even and fair without using extra cement. Note:-water proofing compound will be measured and paid seperately under relevant item

Supply only approved liquid water proofing compound, Make : Conplast x 421 IC of M/s Fosroc Chemical (Inida) Ltd or its equivalent of make Dr Fixit/ STP Ltd.

M&L for Applying oil bounded bitumen primer @ 0.20 Kg/Sqm, and providing 4mm thick APP modified water proofing membrane weighing not less then 4.0 Kg/Sqm, reinforced with non woven polyester matt weighing not less then 160 gm/sqm having softening point not less then 150 degree centigrade, having tensile strength of 650 N/5 cm and 350 N/5cm in longitudinal and transverse directions respectively of the reinforcement, trearing strength of 180 N by torch- on application including min 10cm side over lap & 15 cm end laps. Applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 Kg/sqm as per the detailed specifications. Note : The laying/ applying of APP membrane and other connected work shall be carried out by the approved applicator of the manufacturing company of APP membrane.

Supply and fix polished Sadarahalli granite slab flooring 20 to 22 mm thick with grey cement slurry mixed with pigment to match the shade of the slab including 20mm thick screed bed in cement mortar 1:4 complete on staicase complete all as specified and as directed.

Supply and fix 20 to 22mm thick polished sadarahalli granite tiles as in riser and dado of steps over 10mm thick cement mortar 1:4 complete all as specified and as directed.

Dismantling of plain or corrrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed.

S&F prepainted galvalume alu zinc coating based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/claddding to wall, fix with self tapping screws with necessary washers/welding all as specified and directed. (The profile of the sheet as specifed and directed by Engr-in-Charge).

Dismantling timber scantlings 40 sq.cm and over in section, in any position un framed work all as specified and directed by Engr-in-Charge.

S&F steel work in tubular trusses including special shaped washer etc complete or butt welded tubes conforming to IS-1161-1979 graded St-240 all as specified and directed.

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down DBs including MCB`s 415 Volt/230 Volt all as specified and directed.

Taking down old aluminium sub main wiring of any size all as specifiede and directed.

Taking down sheet metal enclosures of any type any capacity all as specified and directed.

Taking down earth plate including accessories all as specified and directed.

M&L for point wiring complete as specified with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including rigid non-metallic PVC casing and capping of suitable size but not less than 20mm dia , with all fittings, fixed on wall surface including decorative modular cover plates (inner and outer) suitable for housing modular pattern switches/ sockets/ regulators etc. along with necessary metal sunk boxes with 3mm thick flush mounting in the wall duly earthed with 1.5sqmm cable as for wiring above but green in colour as continuous earthing wirecomplete all as specified and directed for the following:

One light point controlled by one 5 amp switch one way

One Ceiling/Exhaust fan point controlled by one switch 5 Amps one way.

One light point controlled by two 2-way switches.

One 3 pin 5 Amp socket out let on independent board.

One 3 pin 5 Amps switch socket combination on same Board

One bell point controlled by one bell push switch 5 Amps one way.

All as per item No.125 above but point wiring with 2 runs of 2.5 sqmm PVC insulated multistranded copper conductor and single run of 2.5 sqmm copper conductor as earth continuity conductor suitable for one 3 pin 15 Amps socket out let on independent board.(For power point). Note: Power point should be connected from DB with MCB control.

S & F Modular switch 6 Amp one way 1 module 230 V AC

S & F Modular switch 6Amp two way 1 module 230 V AC

S & F Modular switch 16 Amp one way 1 module 230 V AC

S & F Modular socket 6 Amp 2/3 pin combined 2 module with pilot lamp working on 230 V AC

S & F Modular socket 6Amp/16Amp 5/3 pin multiple combined 2 module working 230 V AC

S & F Modular fan regulator step type 120W 2 module complete all as specified.

S & F Modular bell push 6 Amp one way 230 V AC

S&F Ceiling rose PVC polycarbonate , isolated body 3 terminals 230 V complete.

S & F Electric Bell, Ding dong type working on 230 volts AC supply complete all as directed.

Taking down exisitng ceiling fan of any size and any capacity and M&L for painting and writing MES No. of ceiling fan complete in suitable with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and refixing the same location complete all as specifed and directed.

Taking down exisitng Exhaust fan of any size and any capacity and M&L for painting and writing MES No. of ceiling fan complete in suitable with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and refixing the same location complete all as specifed and directed.

S & F Exhaust fan 300mm sweep,working on single phase 230 volts, 50Hz AC supply metal body complete with louvres electric connection from ceiling rose to fan connector with PVC insulated 3 core copper cable of suitable size of 0.75 sq mm complete all as specified and directed by Engr-in-Charge.

M & L for core cutting of brick wall in round shape including plastering and finshing for fixing exhaust fan of capacity 300mm sweep as per site requirement all as speicified and directed.

M& L for taking down existing water heater of any size / any cap including servicing, painting and writing MES No. on water heater with one coat of synthetic enamel paint by spraying including filling cavities with filler after cleaning all ducts etc., and refixing the same in the same location as directed by Engr-in-charge.

S & F Sub main wiring with PVC insulated FRLS multistranded copper cable 2 runs of 6 sq mm 1100 V grade with stranded copper conductor in and incl rigid PVC conduit surface on wall (ISI marked) incl all specials like joint elbow, Tee, junction, etc and provision of PVC insulated FRLS copper conductor single run of multistranded copper cable green colour 6.0 sq mm for earth continuity all as specified and directed.

S & F Sub main wiring with PVC insulated FRLS multistranded copper cable 2 runs of 4 sq mm 1100 V grade with stranded copper conductor in and incl rigid PVC conduit surface on wall (ISI marked) incl all specials like joint, elbow,Tee,junction, etc and provision of PVC insulated FRLS copper conductor single run of multistranded copper conductor green in colour 4.0 sq mm for earth continuity all as specified and directed.

S & F TPN 04way vertical type sheet steel powder coated distribution board double door with 200amps rated bus bar suitable for MCCB fixing as incomer and MCB`s fixing as outgoing ,Neutral link, Earth Bar and Din rail IP-43 protection, door earthing, mechanical, impact strength IK 08, insulated bus bar assembly working on 415 V, 50 Hz AC supply all as specified and directed.

S & F SPN 12way horizontal type sheet steel powder coated distribution board double door with 200amps rated bus bar suitable for MCB fixing as incommer/out going Neutral link ,Earth Bar and Din rail working on 240 V, 50 Hz, AC supply all as specified and directed.

S & F MCB FP 63Amps ,16KA working on 415 volts, 50Hz AC supply all as specified and directed.

S & F MCB SPN 32 amps, 16KA, 240 volts, 50Hz AC.

S& F MCB SP, 6-32 amps,10 KA, 240 volts, 50Hz, AC.

S & F surface mounted 20watts 4 feet LED tube light fitting with very high efficiency and connection by flexible PVC cable with stranded copper conductor from ceiling rose to connector of the fitting including complete all as specified and directed.

S & F surface mounted 10watts 2 feet LED tube light fitting with very high efficiency and connection by flexible PVC cable with stranded copper conductor from ceiling rose to connector of the fitting including complete all as specified and directed.

Supply and fixing lamp holder pvc/polycarbonate type with back plate suitable for batten fitting all as specifed and directed.

Supply and fixing of 10 watts LED lamp type B22 all as specifed and directed.

S & F single pole and neutral enclosure with two pin and earth plug and soket with one sinle pole MCB 20Amps 240volts all as specified and directed. (For Geyser).

S & F building security luminaire with high power skyline LED and ensure uniform distribution, maintanance free system, 45watts LED light fittings IP-66 protection including suitahle down rod, clamps, nut, bolts and other related items for fixing on the wall/surface suitable for 230volts, 50Hz AC supply all as specified and directed.

S & F communication modules for TV socket sap code no.ACAKTOW000.

Taking down existing Energy meters carefully disconnecting the incoming and out going electric wire connection and keeping in safe custody including recorded the SI No. meter reading and Qtr No/Circuit No. to the meter complete all as specifed and directed.

Supply, installation,testing and commissioning of factory made meter panel board of size length 1.5mtr,height 1.04mtrs and depth 0.35mtr suitable for wall mounted/floor mounted,made out of CRCA sheet of 2mm thick, indoor type, totally enclosed weather proof, dust vermin proof with front openable, hinged door locking arrangement mounted on MS clamp welded to panel body grouted in wall including provision of Acriylic sheet for meter reading, space for refixing of single phase KWH meters-05Nos, and VTPN DD DB-01Nos. 3 Phase,AC 415 volts,including MCBs four pole 63 Amp - 01 No as incomer and MCBs SPN 32 Amp-05 Nos as a outgoings including taking old unserviceable meter board with connected items, lugs, spacer mounting channels, rubber gasket, locking knobs, PVC shrinkable sleeves, nut bolts, washers etc. epoxy powder coated spray paint with primer complete all as speicifed and all as specified and directed by Engr-in-Charge

M & L for Earthing complete with galvanised earth plate electrode of size 600x600x6 mm thick burried directly in ground earth pit not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 mtrs below ground level connected to 4 mm dia GI earth wire as earth lead upto a length of 7.5 metre long by means of bolts,nuts, washers etc. and protected by GI pipe light grade 15mm dia and 20mm dia GI tubing light grade with funnel for watering, all as shown in electrical plate No 3 of SSR Part-I, back-fill with salt and charcoal, provision of test point including connected to earth test point and necessary earth work excavation in any type of soil PCC (1:3:6) type C1 bed and chamber RCC (1:2:4) type B1, iron grill including GI cover with hinge and funnel watering pipe etc all as specified and directed by Engr-in-Charge.

Taking down LT UG cable of any type any any capacity all as specified and directed.

Taking down GI tubing of any type any capacity all as specified and directed.

Supply, laying and testing Insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5core x 35 sqmm cable all as specifed and directed.

Boring of holes under road, pavement and hard standing by trenchless method by adopting horizontal boring using ultra sound technique and necessary machine specified and as directed.

Excavating in trenchers not exceeding1.5m wide and not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable foundation etc,and getting out in hard /dense soil all as directed

Returing filling in including spreading,leveling Watering and well ramming in layers notexceeding 25cm all as directed.

Removing excavated surplus soil distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point all as directed.

Supply and spread fine river sand in trenches as in cable cushioning all as directed Note :- Punned thickness will be considered for payment

Brick protection cover on cable with sub class 'B' brick,laid dry and flat adjacent to each other complete all as specified

Supply and Lay 50mm dia bore GI2B Light grade complete for cable protections

Taking down gate valve of any type any capacity all as specified and directed.

Supply and lay in repairs of GI tubing medium grade (ISI marked) laid in trenches incluiding all fittings such bend, tea, union, elbow etc complete including testing for 50mm bore sizes all as specified and directed.

Supply and lay in repairs of GI tubing medium grade (ISI marked) laid on wall incluiding all fittings such bend, tea, union, elbow etc complete including testing for 25mm bore sizes all as specified and directed.Note: Rate including cutting of wall where as required and as per site requirement.

Supply and lay in repairs of GI tubing medium grade (ISI marked) laid in trench/ wall incluiding all fittings such bend, tea, union, elbow etc complete including testing for 40mm bore sizes all as specified and directed. Note: Rate including cutting of wall where as required and as per site requirement.

S&F of gate valve 50mm dia cast copper alloy, screw down alloy, screw down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or union fixed all as specified and directed.

S&F of gate valve 25mm dia cast copper alloy, screw down alloy, screw down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or union fixed all as specified and directed

shashi shekar construction

chowdeshwariconstructionco

eurekaenterprises

S CHANDRASHEKAR (SREE BUILDERS)