Supply, Installation, Testing and Commissioning of 02 No. (Gplus2) 20 Passenger MRL Bed Lifts including CMC at (A Block) of MMABM Associated Hospital of GMC Anantnag

Amount

Supply, Installation, Testing & Commissioning of 02 No. (G+2) 20 Passenger MRL Bed Lifts including CMC at (A Block) of MMABM Associated Hospital of GMC Anantnag

Supply, installation, testing & commissioning of servo-stabilizers suitable for operating these Lifts inside the machine room. The stabiliser should have following specifications: a) Capacity:30 KVA, or above 3-phase unbalanced type b) Input: (150-265) V AC P-N; (250 - 460) V AC P-P c) Output: 415 V ± 1% - phase to phase. d) Supply: 3 phase, 4 wires, 50Hz e) Operation: Automatic f) Duty cycle: Continuous g) Transformer windings: Copper wound on CRGO laminations as per IS specifications h) Cooling: Oil cooled i) Efficiency: Better than 98% at full load j) Overload capacity: 15% for continuous 4 hours k) Waveform distortions: Nil l) High speed voltage correction: up to 8V to 20V per second m) Protections: Under voltage, Over voltage and Overload with time delay n) Other features: LED indicators, Digital AC ammeter, AC voltmeter, Frequency meters, Phase Sequence meters, Single phase preventer, Stabilizer by-pass arrangement. The Job also includes P/F of 63 Amp 4 Pole MCCB (36KA breaking capacity) as incomer to the Servo Stablizer to be provided in CRC Enclosure.

Providing/Fitting of 3.5 core, 50 Sqmm unarmoured Al cable for connecting servo stablizer to Change Over panel to Main panel of lift

Change Over panel comprising of 100A Al Bus bar, 63A, 4P MCCBs (36A breaking capacity) as incommer- 2No. (for power supply and DG set), 100A autochangeover switchs, for DG and main power source and 63A, 4P MCCB (36A breaking capacity) outgoing 1 No. to be supplied in a CRC Panel.

Providing and fixing of 6 mm thick checquered plate overhead of lift shaft for machine Including hooks etc

Providing and fitting of structural steel in built up sections

Clearence of pit and Dewatering of lift pit by way of draining of water till the waterproofing is completed. The job includes arranging of dewatering pump and POL for operation .

Stone soling for the pit after clearance and excavation of soil including loading and un -loading at site.

Providing and laying integral cement based water proofing (injection type) treatment including preparation of surface and then applying and grouting a slurry coat of neat cement using 2.75 kg / sqm of cement admixed with proprietary water proofing compound confirming to IS : 2645 . after proper curing applying a 2 coat of cement slurry admixed with proprietary water proofing compound . the job includes finishing the surface with 20 mm thick joint less cement mortar of mix 1:4

GOOD LUCK TRADERS (BID ID -2317544)

M/s Friends Engineering Works (BID ID -2317923)