Setting up of in-house fly ash brick plant on water resources departmental land.

Amount

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

Laying Cement concrete 1:4:8 with 40 mm gauge stone aggregate. mixing by mechanical means using concrete mixer volumetric type

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.

Cement plaster 12.5 mm thick 1: 4(internal)

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete

Finishing walls with texture dexterior paint of required shade with two or more coats applied @3.28 litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm

Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates including locking arrangement with handles etc.complete in all respect

Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. a)Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity (without cistern fitting) size 62x37x67 cm with P trap or S trap and seat cover complete in all respect.

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even

40mm thick grey polished flooring cement concrete 1:2:4 toping finished with 3 mm thick neat coat of cement rubbed and polished using mechanical mixer for mixing of material

Corrugated G.I. Sheet roofing 0.80 mm thick fixed with galvanized iron J or L hooks 10mm dia, G.I. Limpot and bitumen washers complete excluding the cost of purling rafters and trusses

Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC cost of PVC long bend 32 mm dia complete flushing

Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect.

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge

Providing and fixing P.V.C Waste Pipe Collapsible 32mm complete in all respect.

Providing & Fixing in position stop cock Angle valve of approved make (to the approval of Engineer-in-charge )

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge

Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge)

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. 20mm i/d

Providing and fixing in position G.I. Tank Nipple of proved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.G.I. tank

Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in

Providing and fixing in position automatic brass Ball Cock

Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. 20mm i/d Brass Ball

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients,cutting,

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients,cutting,

Wiring inPVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mmdia(1.6mmthick) ISIMarked,recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mmthickwithBrass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (twomodule) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switcheswith indicator etc. and covered with Frame Plate etc., PVC connector (ForFanBoxandCallBell),PVC Bush, Steel Hooks, Sheet metal fan box (1.6mmthickshapehexagonal), CI Circular junctionBoxes(Fourway1½"deepforwalls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plugcontrol point) andotherpettymaterial etc. including the cost of abovematerial, cutting and filling up of chases (with finishing the surface): Wiring light point

Wiring inPVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mmdia(1.6mmthick) ISIMarked,recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mmthickwithBrass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (twomodule) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switcheswith indicator etc. and covered with Frame Plate etc., PVC connector (ForFanBoxandCallBell),PVC Bush, Steel Hooks, Sheet metal fan box (1.6mmthickshapehexagonal), CI Circular junctionBoxes(Fourway1½"deepforwalls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plugcontrol point) andotherpettymaterial etc. including the cost of abovematerial, cutting and filling up of chases (with finishing the surface): Wiring 6Amp. wall socket point

Providing and fixing 110 mm dia . U.P.V.C Rain water pipe (working pressure 4 kg / cm²) (ring fitted type-A) as per IS:13592 including jointing during masonry complete as per specifications and to the entire satisfaction of engineer in charge

Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of engineer in charge.

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer-in charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support for tank. Triple Layer Tanks

Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40 mm gauge and 100mm sand filling using mechanical mixer for mixing of material.

Providing Ceiling Fans

Purchase of DG Set

Electrical Connection Charges

Laser leveling of land up to 300 mm with tractor & Laser leveling Machine complete in all respect.

Structural steel work in compound girders or Stanchions built up from two or more R.S. joists or channel section or plates & angles etc. including cutting and fixing all lattice bars, stiffeners, gusset plates, bolts, nuts, rivets, welding rod, etc. complete with flange plates, heads, sole plates, angle connections, etc. with hoisting and erecting in position

Providing and fixing ( PPGL) precoated painted galvalume sheet roofing (size, shape and pitch of corrugation as approved by Engineer-in-charge) The end rib shall have anti cappillary groove and return leg. The steel sheet must be having yield strength of 550 MPa ( Fy= 550 MPa) metallic coated with Zinc- Aluminium alloy ( i.e. 55% Al, 43.4%Zinc, 1.6% Si-Zincalume) AZ150 ( Min. 150 bm/mm2 total on both sides), pre painted with super Durable Polyster XRW quality paint includes inorganic infrared reflective pigment. The sheet confirms to general requirement of AS/NZS 2728 type 4/ IS 15965 class 3 durability and gloss value of 25%-40%. should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

Steel work in built up tubular pipes (round, square or rectangular hollow tubes etc. ISI Marked) for flat shed (ie.Where no truss work is involved) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work,metallic or plastered,concrete surface to give an even shade.

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Provision of borewell for water arrangement

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M20 With Batching Plant, Transit Mixer and Concrete Pump

Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of enginer incharge (i) 6 mm wide.

Any Other Item

KAMALJIT GOVT CONTRACTOR (BID ID -674733)