Construction of Shed for housing Servo Stabilizer in Centre for IT New Building at New University Campus Jammu

Amount

Engagement of Labour for general clearance of site & leveling of ground Mazdoor

Earth work in foundation, trenches, bulk excavation, including stacking soil neatly away from the edges, filling back by the sides of foundations, in plinth in 150mm thick layers, ramming, watering and consolidation complete including disposal of Surplus earth outside the University Campus. Nothing extra on account of lead or lift shall be paid by the department. In all Kinds of Soil

Providing and laying in position cement concrete of specified grade including curing, cost of centring and shuttering. All work upto plinth level with cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing, cost of centring and shuttering. All work upto plinth level with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying Damp Proof Course 50mm with Cement Concrete 1:2:4 ( 1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete.

Supply & filling River Bed Material (RBM) including ramming, watering, consolidation etc. complete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation, plinth & in superstructure including curing with Cement mortar 1:4 ( 1 cement : 4 coarse sand). All work upto floor V level.

10-15 mm thick cement plaster (internal plaster) with cement mortar 1:6 ( 1 cement : 6 sand). All work upto floor V level.

10-15 mm thick cement plaster (external plaster) with cement mortar 1:4 (1 cement : 4 sand). All work upto floor V level. All work upto floor V level.

Providing and Laying Cement Concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including curing, cost of centering & shuttering etc. complete. All work upto floor V level.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Providing and applying white cement based putty of 1.0 mm (avg.) thickness of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications over a coat of Cement Primer

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and then painting with synthetic enamal paint (Two or more coats) of approved brand and manufacture (Make Asian/Nerolac) using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing pre-coated galvanized iron profile sheets (size, shape & pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyster top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The Sheet shall be fixed using self drilling/self tapping screws of size (5.5 x 55mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required (Make TATA JINDAL/SAIL)

BIDHEE SINGH

RACHIT DUBEY

M/S SYED TUFAIL PARVAIZ

Ravinder Manhas