Construction of Auditorium Building of U.P. Sanskrit Sansthan New Hydrabad,Lucknow.(Balance work)

Amount

Provoding & Installation of 08 passenger Lifi (Elevator) (Basement+G.F.+ 4) i/c Combined Luminous Hall Buton with Digital Hall Position Indicator at all floors. Car operating panel with luminous button, Digital car position indicator combined with direction arrows and overload warning indicator. Battery operated alarm bell,Automatic rescue device and emergency light & fan. Fireman switch at main lobby with electric connection complete in all respect.(GST 12% shall be paid extra)

Providing and fixing of 2mm. Thick Section Powder Coated aluminium work for Window / Door with extruded built up standard tubular sections and other sections of approved make fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all completeWindow

S/L Door

D/L Door

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab over 0.50 sqm i/c all material labour T&P complete

Providing and fixing of Back side acoustic door (sound proof) for auditorium made 19 mm ply frame, infill with 1000 GSM, 5mm thick nonwoven polypropylyne covered with 12 mm ply and surface finished with 4 mm thick teak veneer with melamine polish complete with all fitting, auditorium lock, i/c closing of upper opening with same specification and closing of duct opening, and full border of same specification complete in all respect'

For Electrical & A.C. Work

Supply of submains with two number 6 sq.mm FRLSH PVC insulated 1100 Volt grade multistrand single core copper conductor cable with one no. 4 sq.mm FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire with 25 mm dia heavy duty (2 mm thick) PVC conduit pipe.

Supply of submains with 4 number 6 sq.mm FRLSH PVC insulated 1100 Volt grade multistrand single core copper conductor cable with 2 no. 4 sq.mm FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire with 32 mm dia heavy duty (2 mm thick) PVC conduit pipe.

Supply of single light wall bracket on matching M.D.F.E.G. Board base Cat.-AAA Philips/Crompton/ Bajaj/Havells Make.

Supply of Aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade with required bricks, sand M.S. etc. Mak:- Havells/Finolex/Ralison/Nicco/KIE/Glaster Make.6 sq.mm x 2 core.

16 sq.mm x 2 core.

16 sq.mm x 4 core.

35 sqmm x 3½ core.

120 sq.mm x 3½ core.

400 sq.mm x 3½ core.

Supply of 7 mtr. G.I. octagonal pole of approved make (top dia 70 mm, bottom dia 130 mm & base plate 12 mm thik) having 3 mm thikness with single arms bracket(1 mtr. Length) complete in all respect and RCC foundation material, founation bolt etc. as per PWD Norms.

Supply of 32 mm x 6 mm G.I. Strip with required G.I. Nut Bolt.

Supply of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000 mm, Outer Dia 50 mm, inner Dia 25, terminal Dia 12 mm, outer G.I. pipe of 16 swg and inner G.I. pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity.

Incoming - 630 Amp MCCB = 1 No. Outgoing - 200 Amp MCCB = 4 Nos.

Incoming - 200 Amp MCCB = 1 No. Outgoing - 63 Amp MCCB = 4 Nos.

Supply of Fire extinguisher, ABC Type 6.00 Kg. capacity (ISI marked IS: 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

Supply of Co2 type Fire extinguisher, 4.5 Kg. capacity (ISI marked IS: 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

Supply of fire bucket, round bottom made of G.I. Sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chined and locked, initially filled with fine river sand, water as per directions of Engineer-in-charge.

Supply of shock treatment chart (Prescribed under I.E Rule) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T&P for proper completion of work.

Supply of 1800 mm x 900 mm x 12 mm thick chequered rubber matting of tested quality.

Supply of Power plug with 20A/250 volt flush type modular switch and 5 pin 20A/250V flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for completion of work.

Supply of submain with two number 1.5 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable with 1 nos. 1.5 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable as earth continuity wire with 20 mm dia heavy duty (2mm thick) PVC conduit pipe.

Supply of recess/ Surface/ Pendent mounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. 5 years warranty. Cat AAA

Supply of recess/Surface/Pendent mounting round 10 watt to 15 watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. 5 years warranty. Cat AAA

Supply of recess mounting round 15 watt to 18 watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respect. 5 years warranty. Cat AAA

Supply of 36 watt to 46 watt indoor recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink, diffuser of Special Polycarbonate meterial and driver set complete in all respect. 5 years warranty. Cat AAA Philips/Crompton/ Bajaj/Havells/Wipro Make. with connection wire.

Supply of LED Tube Light with Metal heavy duty box type batten Light fitting 1 x 22 watt suitable for upto 1 x 22 watt LED Polycarbonate tube light complete including tube suitable for both surface & suspended. 2420 system lumens, 1101m/watt, PF>0.95, THD<10%, CRI>80, Sheet Thickness 0.8mm, Tube with aluminium heat sink 5 year warrantee Cat AAA Philips/Crompton/ Bajaj/ Havells/ Wipro Make.

Supply of LED Street light fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 watt. Confirming to IP 66 and above Protection complete in all respect. Cat-AAA Philips/ Crompton/Bajaj/Havells/Wipro Make. 5 years warranty.

Supply of decorative 40 to 45 watt LED Post top indirect light luminaire having Pressure die cast aluminium body and clear glass with driver set confirming to IP 65 and above protection complete in all respect. Cat-AAA 5 years warranty. Philips/Crompton/ Bajaj/Havells /Wipro Make.

Supply of factory wired integral LED flood light luminaires with die cast aluminium housing built with driver set suitable for 200 watt. Confirming to IP 66 protection complete in all respect. Cat AAA Philips/Crompton/ Bajaj/Havells/Wipro Make. 5 years warranty.

Supply of Mirror Light

Supply of Fan Sheet of Backelite

Supply of ceiling fans with fan motor of A.C. Permanent insulation, capacitor rating conforming. The rated voltage 220/240 voltas, 50Hz, 1-ph A.C the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system. ISI Mark. Bajaj /Usha /Cromption/Havells make.

Supply of LED Bulb 9/12 watt ISI

Supply of heavy duites exhaust fan Double ball bearing 18" dia Bajaj / Usha / Cromption make.

Supply of light duites exhaust fan Double ball bearing 12" dia Bajaj / Usha / Cromption make.

Supply of Light duty exhaust fan luvers 12”dia

Supply of Wall Fan 16" Usha / Crompton/Bajaj make

Supply of 63 mm dia x 3.0 Mtr. long G.I. pole with foundation material with clamp.

Supply of G.I. wire 8 SWG.

Supply of Feeder Piller Outdoor Type Incoming – 63 Amp MCCB = 1 No. Outgoing – 40 Amp DPMCB = 6 Nos.

Sound System

SITC of 15" 2-Way Powered Loudspeaker, AP Make:EV ELX200-15P

SITC of 12” 2-Way Power Loudspeaker Make: EV ZLX-12P-AX

SITC of Line Array Grid

SITC of Live 2x 950W with In built DSP Complete with FIR Filters, Audio Limiters, Output delay per channel, 31 band GEQ per channel, PEQ per channel, Load impedance and having PC remote control option L1800FD

SITC of CMS 2200-3 22 Channel Compact Mixing System (18 Mic/Line + 4 Mic/Stereo-Line) Make: Dynacord CMC 2200

SITC of Dynamic cardioid vocal microphone Make: EV CO9

SITC of PL37, Overhead microphone, Condenser, Cardioid Make: EV PL37

SITC of Freestanding gooseneck multi-pattern condenser mic. Mic on/off switch, mic status LED. 18-inch gooseneck Make: EV PC DESKTOP-18

SITC of wired Boundary multi-pattern condenser mic. Mic on/off switch, mic status LED Make: EV PC BOUNDARY

SITC of Wireless Hand Mic & Diversity Receiver Make: EV RC 300 L-A

SITC of wireless Lapel Mic, Body Pack Transmitter & Diversity Receiver . Make: EV RC 300 HD-A

SITC of Mike Stand - Full size Make : BE

SITC of Mike Stand - Medium size Make : BE

SITC of 8 Ch Snake Cable including Make : BE

SITC of 2C X 2.5 Sqmm Speaker Cable. Make : BE

SITC of Patch cords, cables & Conduits

SITC of 8 Channel Stage Box Make : Custom

SITC of Lockable Equipment 27U Rack with cooling Fan & wheels Make : Modular

SITC of Wooden Podium

SITC of 2C X 4 Sqmm Speaker Cable. Make - BE

SITC of 18" Passive Subwoofer Make : EV ELX200-18S

Lighting Arrester

Supply of horizontal air termination (roof conductor) of 25 mm x 3 mm G.I. Strip G.I. clamp complete in all respect as approved by Engineer-in-charge.

Supply of vertical air termination final rod comprising of 300 mm long x 25 mm dia. Copper rod with G.I. material etc. complete in all respect.

Supply of vertical down conductor of 32 mm x 6 mm G.I. strip etc. on approved clamps for lightning conductor. complete in all respect. (For three or four storeyed buildings)

Supply of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000 mm, Outer pipe 76 mm inner Dia 38 mm, terminal Dia 12 mm, outer G.I. pipe of 16 swg and inner G.I. pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing.

Wiring for 2 Nos. Lift

Supply of Required Material for light Point with 1.5 Sq. mm FR PVC insulated multistrand single core copper conductor cable, PVC conduit with 1.5 Sq. mm FRLSH PVC insuleted multistrand copper conductor cable as earth wire drawn inside. continuity wire, Modular type switch & ceiling rose/angle/ batten holder on 3mm thick phenolic laminated backelite sheet etc. complete in all respect. with Modular Box & Cover plate.

Supply of Required Material for fan/fresh air fan point (light duty exhaust fan) with 1.5 Sq. mm FRLSH PVC insulated multistrand single core copper conductor cable, PVC conduit with 1.5 Sq. mm FRLSH PVC insuleted multistrand copper conductor cable as earthwire drawn inside the conduit, Modular type switch & ceiling rose on 3 mm. thick backelite sheet etc. complete in all respect with Modular Box & Cover plate.

Supply of Required Material for plug point with 1.5 Sq. mm FRLSH PVC insulated multistrand single core copper conductor cable, PVC conduit with 1.5 Sq. mm FRLSH PVC insuleted multistrand copper conductor cable as earthwire drawn inside the conduit, Modular type switch & socket etc. complete in all respect with Modular Box & Cover plate.

Supply of Required Material for submains with two number 4 sq.mm FRLSH PVC insulated 1100 Volt grade multistrand single core copper conductor cable heavy duty (2 mm thick) PVC conduit with one no. 2.5 sq.mm FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit. complete in all respect.

Supply of 63 Amp 415 V metal clad T.P.N. rewireable type switch fuse unit on angle iron bracket complete in all respect. Cat-B

Supply of Aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade with 75 mm thick sand all around and protected with burnt bricks on sides and on top. On surface for cable run shall be fixed on cable tray/M.S. clamps etc. 35 sqmm x 3½ core.

Supply of Required Material for 25 mm x 3 mm G.I. Strip.

Supply of Required Material for Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000 mm, Outer Dia 50 mm, inner Dia 25, terminal Dia 12 mm, outer G.I. pipe of 16 swg and inner G.I. pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity.

Supply of Required Material for 6 Amp. To 32 Amp. SPMCB (10 KA) Cat-B

Supply of Required Material for 63 Amp. DP MCB (10 KA) Cat.-B

Supply of Required Material for surface/flush mounting 12 ways SPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineer in charge. Cat-B

Supply of Required Material for Power plug with 20A/250 volt flush type modular switch and 5 pin 20A/250V flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for completion of work.

Supply of Required Material for hexagonal/Round G.P. fan box of approved make made up 1.0 mm thick ISI Marked G.P. sheet spot welded four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S. bar x 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting along with supply of all material, labour, T&P etc. required for proper completion of work.

Supply and wiring of submain with two number 1.5 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit with 1 nos. 1.5 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable as earth continuity wire drawn inside the conduite complete in all respect including matching colour wash.

Supply of Required Material for LED Tube Light with Metal heavy duty box type batten Light fitting 1 x 22 watt suitable for upto 1 x 22 watt LED Polycarbonate tube light complete including tube suitable for both surface & suspended complete in all respect. 2420 system lumens, 1101m/watt, PF>0.95, THD<10%, CRI>80, Sheet Thickness 0.8mm, Tube with aluminium heat sink 5 year warrantee Cat AAA

Supply of water tight oblong bulkhead Fitting ordirnary

Supply of LED Bulb 12 watt ISI

Supply of 5 Amp Plug & Switch with Modular box, sheet etc.

Supply of light duites exhaust fan 12" dia Bajaj / Usha / Cromption make.

Supply of exhaust fan luvers 12”dia or 18"dia

Supply of Wall Fan 16" Usha / Crompton/Bajaj make

G.S.T. Will be paid extra as applicable.

M/s S. N & Company