Repair Of 25 and 20 H.P. Motor Pump and Starter

Amount

Repair of 25 H.P. sewage (sluge) motor & pump set discharge 330 m.p .m at new plant sump well. – 2Nos.

Rewinding of 25 H.P.sewage motor-pump with “f” class insulation copper wire

Providing & fixing of boll bearing 6611 s.k.f. make.

Providing & fixing of double boll bearing 5511 s.k.f. make.

Filling of oil 140 no.

Providing & fixing of oil seal & water seal complete with housing .

Providing & fixing of new impeller, chhabhi and fitting.

Providing and fixing of m.s. pressure plate casting, machining granding & threading

Providing and fixing 100mm. Dia. M.s. band with nut bolt and rubber sheet.

Providing and fixing of m.s. flange 100mm Dia. for G.I. pipe with nut bolt and rubber sheet.

Providing and fixing of M.s. clamp for G.I. pipe and nut bolt.

Taking out of motor – pump set from sump well & transportation to work shop & return to sump well with fitting trial & testing.

Note-dedution of old copper wire

repair of 25 H.P. sludge control panel starter.

Providing& fitting of moisture unite.

Providing & fitting of timer ( star delta ).

Providing & fitting of contactor set 1.5 m.l.& 1.00 m.l .

Providing & fitting of voltmeter.

Providing & fitting of amp. Meter

Providing & fitting of single phase preventure.

Providing & fitting of cut out and wiring 6no.

Labour charge with repair and fitting.

Repair of 25 & 20 H.P. kirloskar and jyoti make pump. – 2nos.

Making and fixing of new M.S. shaft for pump and new chuk nut as per sample.

Recasting of new G.m. sleeve machine and fitting as per sample .

Making of C.I.Bush pump body two side and fitting .

Welding & machining for bearing sheet two side.

Provision of boll bearing 6310 s.k.f. make.

Provision of boll bearing 6312 s.k.f. make.

recasting of M.S. glane plate & stud as per sample .

Recasting of new G.M.impeller machinin ,hole and chhabi groove & fitting as per sample .

Making new stud with bolt for pump body a per sample.

Provision and making of M.S. coupling pully or motor and pump as per sample and nut bolt with rubber belt

Transportation charges from site to workshop and workshop to site after repairing of trial and testing

NOTE- Deduction of old material.

Repair of 25 H.P. kirloshkar make motor.

Dismentling motor of complete binding of motor and cleaning by petrol.

Making new coil set (F) class copper wire insulation with binding properly with varnishing, heating .

Repair of rotor and bearing sheet.

Making of new M.S. sleeve and fitting.

Provision of boll bearing 6309 S.K.F.

6 mm. copper 3 phase wire cable connection for starter to motor.

Labour charges for opening and transportation for site to works of and back to site with fitting and trial and testing .

Note -: Deduction of old copper wire.

Repair of 20 H.P. jyoti make motor .

Dismentling motor of complete binding of motor and cleaning by petrol.

Making new coil set (F) class copper wire insulation with binding properly with varnishing, heating .

Provision of boll bearing 6309 S.K.F.

Provision of boll bearing 6310 S.K.F.

Making new sleeve for housing of two side.

Making new bearing plate and stud.- 2 Nos.

Labour charges for opening and transportation for site to works of and back to site with fitting and trial and testing .

Note -: Deduction of old copper wire.

Repair of base plate for motor pump -2N0s. and vaccume Pipe line

Dismentling of motor pump section and delivery pipe and base plate and foundation.

Excavation work for foundation by drill machine

Making new nut bolt 10’’X3/4 ‘’ long with washer and grouting

Fixing of base plate of cement concrete grouting and Plaster for frame

Fitting of motor pump for base plate with nut bolt and rubber sheet for section and delivery pipe.

Repair of 125 and 100mm dia. N.R.V. ring, rod, flage,nut bolt with rubber sheet and fitting

Repair of 25 & 20 oil immersed starter contact set, timer, coil, star delta, on off switch, oil and complete wiring.

Providing and fixing of vaccume ¾’’ pipe line, nipple, socket.t, elbow, gate valve

Welding work of 600 mm dia M.S. pipe line.

Providing and fitting of ampere meter, voltmeter with C.T. coil with wiring.

Replacement of brust aluminum phase of pole for wiring.

Lugging for cable joint of cables lugs H.T. tap, cotton tap, PVC tap with wiring.

SHAKIL BEG