Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.9 LAccepted-AOC | L1 | Accepted-AOC Lowest and reasonable | |
| 2 | L2₹38.9 L+₹4.0 L (11.6%)Rejected-Finance | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹43.3 L+₹8.4 L (24.2%)Rejected-Finance | L3 | Rejected-Finance Not lowest |
Tender Value
₹33 L
EMD Value
₹66,000
Closing Date
13 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Jaipur
HQ CWE Jaipur, Kalyan Marg, Jaipur
PROVN OF TOILET AND BATHROOM BLOCKS UNDER GE JAIPUR AT JAIPUR MIL STN
2022_MES_556169_2
CWE/JPR/82167/E8
Open Tender
Civil Works
Item Rate
180 days
GE Jaipur
Enlisted with MES in Class D and above and category a (i)
7 documents required · 7 mandatory
₹500
Yes
GE Jaipur
₹66,000
Yes
4 Feb 2023
22 Nov 2022
15 Dec 2022
22 Nov 2022
13 Dec 2022
29 Nov 2022
Amount
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil etc complete all as specified and directed.
Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation, etc or for shaft, well, cesspit, manhole, pier holes, poles, stay, cable etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out soft/loose soil etc complete all as specified and directed.
Returning filling with earth obtained from excavation including spreading watering and consolidation in layers not exceeding 25 cm thick .etc complete all as specified & directed.
Removal of excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point .etc complete all as specified & directed.
M&L Sand filling under floor including spreading and levelling well ramming including watering in layers not exceeding 25cm thick etc complete all as specified & directed
M&L for Broken stone or boulders Hardcore of guage exc. 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface etc. complete all as specified and directed.
M&L cement concrete in foundations, filling and mass concrete type D2, (1:4:8) using 40 mm graded aggregate. etc complete all as specified and directed.
M&L 75mm thick cement concrete in floor finish concrete type D2, (1:4:8) using 20 mm graded aggregate. etc complete all as specified and directed.
M&L 100mm thick cement concrete in sub base of floor concrete type D2, (1:4:8) using 40 mm graded aggregate. etc complete all as specified and directed.
M&L for Brick work sub class B bricks straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) etc complete all as specified and directed.
M&L for Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) etc complete all as specified and directed
M&L RCC M-25(Design Mix) using 20mm graded stone aggregates in foundations, including rafts, footings, foundation beam , plinth beams, bases of columns etc. Basement slabs, under reamed piles and mass concrete etc complete all as specified and directed.
M&L RCC M-25(Design Mix) using 20mm graded stone aggregates in beams, cantilevers, lintels over 1.5m span etc complete all as specified and directed.
M&L RCC M-25 (Design Mix) slab supported on walls , beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed.
M&L RCC M-25 (Design Mix) as in Columns, pillars, piers, posts and struts for etc complete all as specified and directed.
M&L for rough finish formwork to sides of concrete foundations, footings , bases of columns, raft and raft beams, sides and soffits of foundations and plinth beams and similar work: vertical or to better for rough finished flat surfaces of concrete etc complete all as specified and directed.
M&L for rough finished formwork to sides and soffits of floor or roof beams, beam haunching, girders, lintels, cantilevers, shelves including supports, overhangs etc. for rough finished flat surfaces of concrete etc complete all as specified and directed.
M&L for rough finished formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work: not exceeding 200m thick (horizontal or sloping) for fair finished flat surfaces of concrete etc complete all as specified and directed.
M&L for rough finished formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished flat surfaces of concrete etc complete all as specified and directed.
M & L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide etc complete all as specified and directed.
M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding/welding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc. complete all as per specified and directed.
M&L for Mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding/welding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc. complete all as per specified and directed.
M&L 20mm thick screed in CM (1:3) mixed with water proofing compound as per manufacturer's instruction on RCC slab/chajjas while the concrete is steel green and finished even and smooth without using extra cement etc. complete all as per specified and & directed. Note: - WPC shall be measured and paid separately under respective items.
Supply only integral waterproofing compound ISI marked.
M&L for Figured glass 3mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane etc. complete all as per specified and directed.
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening etc complete all as specified and directed.
S&F in the frames at site factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement etc complete all as specified and directed.
S&F anodised aluminium powder coating of any colour (thickness or power coating not less than 50 micron) ventilator shutters, openable type without sash bar, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws as per TD/2004/34 sheet No 1/1 of CE JZ etc. complete all as specified and directed.
S&F of 100 mm SS butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkhat including welding etc complete all as specified and directed.
S&F stainless steel barrel tower bolts not less than 12mm dia of extruded section and fixed 200mm length of bolt etc complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section and fixed 150mm length of bolt etc complete all as specified and directed.
S&F Mild steel chromium plated sliding door bolts 200 mm long, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed etc complete all as specified and directed.
S & F Aluminium handles of size 150 mm, anodised, cast type of approved make complete all as specified & directed
M&L for rendering 10mm thick on brick masonry surfaces or surface other than fair faces of brick work/concrete surface in CM (1:4) on walls finished even and fair without using extra cement etc complete all as specified and directed.
M&L for rendering 15mm thick on brick masonry surfaces or surface other than fair faces of brick work in CM (1:4) on walls finished even and fair without using extra cement etc complete all as specified and directed.
M&L for rendering 15mm thick on brick masonry/concrete surfaces or surface other than fair faces of brick work in CM (1:4) mixed with WPC @3% of cement surface finished even and smooth without using extra cement etc. complete all as specified & directed. Note: - WPC shall be measured and paid separately under respective items.
M&L for rendering 5 mm thick in CM (1:3) on ceiling/ceiling patches/concrete surface finished even and fair without using extra cement etc complete all as specified and directed.
M&L for Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc complete all as specified and directed.
S&F for 15 mm GI tubing medium grade with all fitting and fixed to walls of concealed or fitted to ceiling or laid in under floor etc complete all as specified & directed.
S&F for 20 mm GI tubing medium grade with all fitting and fixed to walls of concealed or fitted to ceiling or laid in under floor etc complete all as specified & directed.
S&F for 25 mm GI tubing medium grade with all fitting and fixed to walls of concealed or fitted to ceiling or laid in under floor etc complete all as specified & directed.
S&F for 40 mm GI tubing light grade with all fitting and fixed to walls of concealed or fitted to ceiling or laid in under floor/walls/poles/road crossing etc complete all as specified & directed.
S&F 20mm bore gate valve gun metal screwed down high pressure with iron wheel head screwed both ends for iron pipe or for union etc. complete all as specified and directed.
S&F bib taps 15mm bore cast copper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union etc. complete all as specified and directed.
S&F bib taps 15mm bore cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union etc. complete all as specified and directed.
S&F two ways bib tap 15 mm bore cast copper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union etc. complete all as specified and directed.
S&F PVC valve less, syphonic action type flushing cistern 10 litres capacity, low level, white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC, 32mm dia suitable for low level cistern etc complete all as specified & directed.
S&F 15mm bore PVC connections, with PTMT nuts of length 450mm etc complete all as specified and directed.
S&F Vitreous China wash hand basin white flat black size of (550 X 400)mm including brackets for fixing and cutting for and pinning in ends of brackets or erecting stand trap etc complete all as specified & directed.
S&F vitreous china Wash hand basin white, Counter sunk including chromium plated waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore,65mm long & making good disturbed surfaces to match with the existing etc complete all as specified & directed.
S&F pillar taps 15mm bore swan neck, Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc. complete all as specified and directed.
S&F vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) complete including connection to trap and flushing pipe anti symphony pipe including providing connection and lime concrete bedding to making good to floor etc complete all as specified & directed..
S&F Vitreous China, pedestal pattern (EWC) white (excluding flushing cistern and flush pipe) including plastic seat cover white closed pattern with flat bottom and cover and MS chromium plated hinging device including connection to outgoing pipe including providing connection and lime concrete bedding to making good to floor etc complete all as specified & directed.
S & F vitreous china squatting pan 'Orissa' pattern water closet white size 580mm x 440mm with integral foot rest and 'P' or 'S' trap (excluding flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphonage pipe including providing connection and lime concrete bedding to making good to floor etc complete all as specified & directed.
S & F vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) etc complete all as specified & directed.
S & F stop valves cast copper alloy screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions in 15 mm bore dia pipe etc complete all as specified & directed.
S & F stop valves fancy type, chromium plated cast copper alloy screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions in 15 mm bore dia pipe etc complete all as specified & directed.
S & F stop valves fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions in 15 mm bore dia pipe etc complete all as specified & directed.
S & F stop valves cast copper alloy screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions in 25 mm bore dia pipe etc complete all as specified & directed.
S&F Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed 15mm bore dia pipe, (Minimum weight 15mm-90gms) etc complete all as specified & directed.
S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in 20 mm bore dia. (Minimum weight 20mm-210gms) etc complete all as specified & directed.
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified & directed.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified & directed.
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.
S&F 75mm bore PVC (SWR) bends (any radius) etc. complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends (any radius) etc. complete all as specified and directed.
S&F 75mm bore PVC (SWR) vent cowl etc complete all as specified and directed.
S&F capacity of 2000 Litres rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete all as specified & directed.
S&F capacity of 1000 Litres rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete all as specified & directed.
S&F capacity of 500 Litres rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete all as specified & directed.
S&F ball brass valves, high pressure, with polythene float and fly-nut complete, screwed for iron pipe or brass ferrule and fixed of pipe in 20mm etc complete all as specified & directed.
S&F tubular towel rail 20 mm dia, D type, 60 cm long between flanges with brass chromium pated bracket etc complete all as specified and directed.
S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) etc complete all as specified and directed.
S&F of looking mirror of size 1400mm x 600mm of 5mm thick with double coat for protection & longevity grounded edges for safety and silver plating on the back for better reflection. etc. complete all as specified and directed.
S&F of Soap dish, any type, fixed to plugs with chromium plated brass screws, vitreous China white, approximate size 160x 160x90mm etc complete all as specified and directed.
S&F fancy type CP Health faucet 15mm bore (ISI marked) including extension pipe of 1 mtr long etc complete all as specified & directed.
M&L for preparation of newly plastered surfaces & applying three coats of white wash by mechanical means on walls etc complete all as specified and directed.
M&L for preparation of newly plastered surfaces & applying three coats of white wash by mechanical means on ceilings/concrete surface etc complete all as specified and directed.
M&L for newly surface to ensure better sticking including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work, preparation of newly surface with putty that applying (priming seal-o-prime) on plastered surface and two coat of weather proof exterior emulsion paint (weather coat smooth) using hand roller on external wall surface, complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer etc complete all as specified and as directed.
M&L non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including providing 15mm thick screed bed in CM (1:6) etc complete all as specified and directed.
S&F coloured glazed ceramic tiles vertical surfaces first quality of size (300x450) mm, 7 to 8 mm thick (digital tiles), in skirting, dado etc laid in concept/pattern using highlighters set and jointed in neat cement slurry and pointed in coloured cement to match shade of tiles and including providing 10mm thick backing coat in CM (1:4) etc complete all as specified and directed.
S&F coloured glazed ceramic tiles vertical surfaces first quality of size (300x600) mm, 7 to 8 mm thick (digital tiles), in skirting, dado etc laid in concept/pattern using highlighters set and jointed in neat cement slurry and pointed in coloured cement to match shade of tiles and including providing 10mm thick backing coat in CM (1:4) etc complete all as specified and directed.
M&L 50 mm thick cement concrete (1:3:6) type C1 using 20mm graded aggregate as in sub base of flooring/plinth protection etc complete all as specified and directed.
M&L 75 mm thick cement concrete (1:3:6) type C1 using 20mm graded aggregate as in plinth protection etc complete all as specified and directed.
M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with grey cement laid over and including 25mm thick sand cushion layer etc complete all as specified and directed.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required etc. complete all as specified and directed.
M/L for preparation of newly plastered / stone kerbs surfaces by complete removal of surfaces and applying two coats of synthetic enamel paint over a coat of primer etc complete all as specified and directed.
M&L PVC(SWR) floor trap/ nahani trap, plain with grating including jointing to waste pipe with solvent cement dia of outlet 75 mm etc complete all as specified and directed.
M&L Mild steel Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc.Fe-290(Gde-165) etc complete all as specified and directed.
S&F 150 mm bore reinforcement cement concrete pipe class NP2 laid and jointed complete with collar etc. complete all as specified and as directed.
M&L concrete bed in PCC 1:4:8 type D-2 to drain pipes of 150 mm bore including packing under and hunching against the sides of pipes after they are laid and tested etc. complete all as specified and as directed.
M&L cutting into existing man holes for connecting new drains of 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel 1/2 round or 3/4 section in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required etc. complete all as specified and as directed
M&L precast RCC 1:2:4 type B-1, using 20mm graded stone aggregate for manhole cover including placing over manhole all as specified including demolition of old RCC manhole covers etc. complete all as specified and as directed. Note: - Reinforcement shall be measured and paid separately under respectively items.
M&L cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in bed blocks, coping etc including necessary form work etc. complete all as specified and as directed.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15 mm thick screed bed cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Rounding to edges of stone slabs (Kota stone) one edge, such as in steps and other similar situations etc complete all as specified and directed.
M&L cement concrete in foundations, filling and mass concrete type B2, (1:2:4) using 40 mm graded aggregate. etc complete all as specified and directed.
Excavation in post holes each not exceeding 0.5 Cum getting out, in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface all as specified and directed.
S&F brass Chromium plated shower roses 125mm size with or without swivel joints suitable for fixing with 15 mm bore pipe including shower arm 15mm bore size with bend of 45 degree with flange etc. complete all as specified and directed
S&F salt glazed stone ware gully traps square or rounded mouthed type P or S of size 150 x 150cm etc complete all as specified and directed.
S&F 75mm bore PVC (SWR) junction single, (single T provided with access door), equal or unequal etc complete all as specified and directed.
S&F 110mm bore PVC (SWR) junction single, (single T provided with access door), equal or unequal etc complete all as specified and directed.
Supply and laying DWC pipes ( Double wall corrugated) of class SN-4, IS-16098 (Part-II) of size internal dia of 150 mm, laid in trenches and jointed complete with coupler, bends, tee, reducers etc complete all as specified & directed. Make: Ultra plus DWC PE pipe of Supreme/Corfit of Prince/D-Rex DWC of Astral.
S&F peg set of six mild steel powder coated design as approved etc complete all as specified and directed.
M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sq mm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 Sq mm (Green) drawn into and including concealed rigid non-metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators as required for the following :- (Note - Cost of cutting of chases in stone masonry and making good disturbed surfaces for concealing the conduit shall deemed to be included in quoted rate of point wiring) complete all as specified and directed.
(a) One light/fan point controlled by one switch.
(b) One socket outlet 6 amp controlled by one switch on the same board with other switches.
(c) One socket outlet 6 amp controlled by one switch on independent board.
M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 Sq mm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 Sq mm (Green) drawn into and including concealed rigid non-metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets as required for one 3 pin socket outlet 15/16 amp point controlled by one switch on independent board.
S&F switch piano flush button single pole one way 6 Amp 230 volts etc. complete all as specified and directed.
S&F switch piano flush button single pole one way 16 Amp 230 volts etc. complete all as specified and directed.
S&F socket outlet 2 in 1, 3 pin, 6 & 16 Amps flush type 230 volts etc. complete all as specified and directed.
S&F socket outlet 2 in 1, 2 & 3 pin, 6 Amps flush type 230 volts etc. complete all as specified and directed.
S&F ceiling rose 6 amp, 3 plates polycarbonate body etc. complete all as specified and directed.
S&F angle holder, PVC/Polycarbonate type with back plate suitable for batten fittings etc. complete all as specified and directed.
Supplying and fixing LED batten (1.2 m) made of CRCA sheet housing with a PC glossy difusser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 19 watt (including driver) having colour temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 etc. complete all as specified and directed. Make - Philips cat ref no. ENDURALED BATTEN "BN 308C LED 20S PSU CDL WH" or Bajaj cat ref no. BLTRU 20W WH VIVA or equivalent in Wipro/Havells
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.
Supply and fix electric water heater, storage type steel body with extra thick superior cold rolled steel with high density PUF insulation made inner tank and heating element upto 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed. Make:- Havells Monza H or equivalent in Bajaj/Recold
M&L for sand cushioning to PVC underground cable with crush stone sand and punning to provide a required cover complete all as specified and directed. Note:- Punned thickness shall be considered for payment purpose
Supplying and laying factory made un-reinforced PCC precast cable covers class LV, type I, peak, size 300mm x 180mm x 40mm complete all as specified and directed.
Supply, laying and commissioning XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts cross sectional area 16 sqmm 2 core System laid in trenches/ ducts/ encased in GI pipe/ fixed to poles including jointing & testing etc. complete all as specified and directed
Supply, laying and commissioning XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts cross sectional area 16 sqmm 4 core System laid in trenches/ ducts/ encased in GI pipe/ fixed to poles including jointing & testing etc. complete all as specified and directed
Supply and fix sheet metal enclosure Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB etc. complete all as specified and directed
M&L for submain wiring along with earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of nominal sizes 2x6 sqmm + 1x6 sqmm earth wire in 25 mm dia conduit etc. complete all as specified and directed
S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required etc. complete all as specified and directed Make - Legrand cat ref no 507611 or equivalent in Schneider/Hager.
Supplying and fixing LED bulkhead fitting 9 watt IP 66 & IK 09 with polycarbonate body duly prewired connection with 0.75 sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable etc. complete all as specified and directed Make: - Philips cat ref no. WT202W LED6S CW PSU S2 PC or equivalent in Bajaj/Wipro/Havells.
S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs etc. complete all as specified and directed of following ratings:-
(a) Single pole 6 to 32 amp.
(b) Double pole 10 to 32 amp.
S&F heavy duty stainless steel connection pipe 15mm bore dia, 450mm long, hot and cold premium quality SS-304 grade alongwith copper inner joint, EPM tube and brass nuts, double ring sealing washer to prevent leak connection etc. complete all as specified and directed
S&F 15mm bore dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed etc. complete all as specified and directed.
Supply and fix exhaust fan, heavy duty AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers etc. complete all as specified and directed.
M&L for pipe in pipe chemical earthing with GI pipe electrode 3.0 m long having outer pipe dia 50 mm & inner pipe dia 25 mm duly filled with highly conductive and anti corrosive compound tested from NABL certified Laboratory of required quantity in ground by digging a bore of 100 mm dia surrounded by soil friendly backfill compound including connection with galvanised earth wire 4 mm dia from earth electrode to the equipment to be earthed duly protected in 15 mm medium grade GI pipe upto 7.5 m, making PCC pit of size 0.3 m x 0.3 m x 0.3 m (inner size) in mix 1:3:6 type C1 with PCC 1:2:4 type B-1, 40 mm thick cover with lifting hook made out of 8 mm dia bar and testing on completion to achieve value not more than 2.0 ohm complete all as specified and directed.
Drilling and tapping cast iron water main (in possion) for branch connection of 15/25/40/50 mm dia including clamps, nuts, bolts and rubber packing as required etc. complete all as specified and directed
S.R.Enterprises
SAI MAX INFRAPROJECTS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .