Interior decoration work of Control Room and Conference Halls at third and fourth floor of Neer Shakti Sadan in NHPC office Complex, Sector-33, Faridabad

Amount

Part A- Civil/Finishing Works

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 15.7.4 In cement mortar

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in above plinth upto floor V level in all shape and size in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Providing and fixing of wood work in wall paneling, false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.

Providing and fixing of 12mm insulation board in wall paneling etc. complete i/c necessary fixing with rawl plugs, screws etc.

Providing & Fixing 50mm thick, 1000GSM Polyester fibre Insulation for acoustic paneling fixed to wall with screw, rawl plug & washers and held in postion by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge.

Providing and fixing 4 mm thick teak veneer (Make: Greenply, Sonear or Equivalent) plain lining with necessary screws, rawl plugs etc., complete.

Polyurethane polishing. Two or more coats on new works including a coat of wood filler complete in all respect.

Providing and fixing of 16 mm thick Acoustic Slat of size of (W- 2 feet x H- 2') Duly fixed on the Frames complete with Tongue and Groove systems and necessary Fixing with Screws etc.

Providing and laying of Tiled Polypropylene Carpet of pile height 4 to 5mm and pile weight 700grams/sqm with primary backing of non woven lutrador and secondary backing of PVC with fiber glass with Underlay by the use of Pidilite adhesive as required Complete.

Providing and fixing fire retardant fabric of approved shade in wall paneling with UPVC acoustic fabric gripper with necessary screws, rawl plugs etc., complete.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Part B- Electrical works

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

15/16 A switch

6 pin 15/16 A socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required

3 Module (100mmX75mm)

6 Module (200mmX75mm)

Supply and Fixing of LED Cove Light (rope Type ) Make Philips/ Havells/Acco or equivalent,Of Warm White 6watt/ meter , 3000K IP65 400 Lumens /Meter of with Adaptor as per the Site Requirement.

Supply and fixing of LED Recessed Light Make Philips/ Havells/Acco or equivalent, 36Watt 2ftx2ft with all Necessary fittings required

Supply and Fixing of Led Profile Light LED Profile Light Make Philips/ Havells/Acco or equivalent With RGB LED 16Watt Strip, 5 Meter with LED Driver Complete as per required.

STUP Infra Pvt Ltd

M/s Satish kumar