SPECIAL REPAIRS TO JOINERY, FLOORING, INBUILT FURNITURE AND ROOF TREATMENT IN VIKRAM BATRA BLOCK (BLDG NO P-542) AT CDM SECUNDERABAD

Amount

Taking down cement plaster/roof felt etc on brick or stone walls, concrete surfaces roof,chajja,ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M & L for water proof plastering 15mm thick on fair faces of brick work or concrete surfaces or sunken floor in CM 1:4 with WPC @3% by weight of cement including finishing the surfaces all as specified and directed.

Dismantling of floor, hearth or wall tiles/terrace roof tiles including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified.

M&L for Cement concrete type B- 0, 1:2:4 (12.5mm graded aggregate) 25 mm thickness in floor complete all as specified.

M&LNon - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) coloured area of each tile size 600mmx600mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4 all as specified and directed. Make:Kajaria/Johnson as approved by GE.

S&F Glazed ceramic coloured tiles in vertical surface 600mmx1200mmx 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10 mm thick rendering in CM 1:3 all as specified and directed. Make:Kajaria/Johnson as approved by GE.

M&L for Vitrified Ceramic tiles Dark shade double charged 10 mm thick (square/ rectangular) polished, area of each tiles size 600mmx600mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in CM 1:4 all as specified and directed. Make:Kajaria/Johnson as approved by GE.

M&L for Vitrified Ceramic tiles Dark shade 10 mm thick (square/ rectangular) polished, area of each tiles size 600mmx600mm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mm thick rendering in CM 1:3 all as specified and directed. Make:Kajaria/Johnson as approved by GE.

M&L for Vitrified Ceramic tiles matt finished Dark shade double charged 10 mm thick (square/ rectangular) polished, area of each tiles size 1000mmx1000mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in CM 1:4 all as specified and directed. Make:Kajaria/Johnson as approved by GE.

M&L for Vitrified Ceramic tiles matt finished Dark shade 10 mm thick (square/ rectangular) polished, area of each tiles size 1000mmx1000mm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mm thick rendering in CM 1:3 all as specified and directed. Make:Kajaria/Johnson as approved by GE.

M&L for Vitrified Ceramic tiles matt finished Dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in skirting/dado/steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mm thick rendering in CM 1:3 all as specified and directed. Make:Kajaria/Johnson as approved by GE.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25 mm thick rubber moulded, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments & incl screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:4 complete all as specified.complete all as specified.

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) n exc 1.5 sqm each etc including making good of hold fast holes with PCC Type C1 1:3:6 complete all as directed by Engr-in- Charge

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n.exc 4 Sqm each etc making good of hold fast holes with PCC Type C1 1:3:6 complete all as directed by Engr-in- Charge

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Make: Rajshri or equivalent as approved by GE.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Make: Rajshri or equivalent as approved by GE.

S&F 5.5 mm thick tinted sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

S&F 4 mm thick tinted sheet glass frosted, ordinary quality and glazing with oil putty in square Nexc 0.5 sq. m in each pane complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frames shall be covered with head moulded plain colour PVC ‘C” channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, and bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded and sealed to the stiles rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.

S&F Pressed steel door frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc. of size 125 x 60mm

M & L plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate in bed block or hold fasts or frame filling incl necessary form work

S&F of 35mm thick IInd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc. divided in to square with plain chamfered or rounded mitred and rebated sash bars, any numbers, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutters as per ISI and all as specified in SSR Pt –I and as directed.

S&F of 35mm thick IInd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated as directed.

M & L for Preparing new steel surfaces of any description exc 10cm width or grith and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L preparation of surfaces of wood and wood based material description over 10cm in width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

S&F 125 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22

S&F 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed

S&F 200 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed of extruded section

S&F 200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed

S&F 40mm flap width continuous (piano) hinges, mild steel, bright finish or electro-galvanised

S&F Extruded brass handles, fabricated type polished 150 mm all as specified.

S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised all as specified.

M & L for 140 mm long floor doorstopper brass body and tongue with hard drawn steel spring fixed complete all as directed

S&F in repair 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed .

S&F in repair 200 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed of extruded section .

S&F in repair 200 mm long Aluminium anodised, barrel tower bolts of extruded section.

S&F in repair Extruded brass handles, fabricated type polished 150 mm fixedall as specified.

S&F in repair 150mm Extruded aluminium alloy handles, fabricated type, anodised fixed .

S&F in repair for 140 mm long floor doorstopper brass body and tongue with hard drawn steel spring fixed complete all as directed

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old serviceable glass/broken glass panes of any description, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size all as specified.

M/L for 4 mm thick tinted sheet glass, ordinary quality and fixed with glazing clips and oil putty in squares exceeding 0.5 Sqm in each pane.

S&F in repair 12 mm thick Ply wood BWR, type BB fixed with screws to walls by inserting rawl plugs in the wall/ column surfaces.

S&F in repair 100mm size hasp and staple, safety type, aluminum anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws,

S & F 40mm dia cupboard knobs fixed with nut screw & washer or brass polished.

S&F ball catch spring 8mm dia steel ball and brass body and striking plate including letting and fixed in complete.

S&F in repairs brass chromium plated tubular curtain rod 20mm dia.

S&F in repairs brass chromium plated brackets/ end globes.

S&F in repair 18 mm thick Pre-laminated particle board, interior grade, pre-laminated both sides with decorative choice laminations

S&F for 300 mm MS ordinary rat tail rod pattern springs and including roller and roller plate complete

S&F in repairs for 300 mm MS ordinary rat tail rod pattern springs and including roller and roller plate complete fixed

M&L for M.S Hold fasts of FI 25 x 3 mm complete all as specified and directed.

M&L vitrous china wash hand basin full pedestal , white, flat back size 560x 430x195 mm etc. fixed in repairs Make : Cat No:CNS-WHT-303 of Jaquar or equivalent .

Supply and fix in repair bathroom mirror cabinet PVC of size 450 X 300 mm fancy type complete all as specified and as directed . Make : Cat No-554 of Prayag or equivalent .

S&F in repairs Stop/angle valves fancy type 15mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.Make: JAQUAR or equivalent in hind ware/ Parryware/CERA as approved.

Supply and fix in repair 150 X150 mm overhead shower completed all as specified and directed make Cat No OhS- SHR - 1605 of Jaquar or equivalent make of soma/ crab tree/ kingston/meera/Kohler/ Marc as approved.

Supply and fix in repair CP health faucet with 01 Mtr tube and hook complete all as specified . Make : Cat No:ALD-579 of Jaquar or equivalent .

S&F in repairs15mm size two way bib tap fancy type chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .Make: cat no: FON-CHR-40041 JAQUAR or equivalent in hind ware/ Parryware/CERA as approved.

S&F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed

Taking out existing water closet, pedestal pattern and replacing with new EWC (Pedestal Pattern) cascade type with flush tank, seat cover etc white including fixing bolts complete including making good to floor to match with adjoining surfaces .Make: cat no: SLS-WHT-6751P180PPZ JAQUAR or equivalent as approved.

S&F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed Make: Cat No.CON-021KN of Jaquar or equivalent as approved.

S&F in repairs, wall mixer with provision of over head shower with 115mm long bend pipe on upper side connecting legs and wall flanges complete all as specified and directed. Make :- Cat No FLR-5273UPR of Jaquar or equivalent make of SOMA/ CRABTREE /KINGSTON /MEERA /KOHLER/MARC or equivalent make as listed in PS

S&F in repairs brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges

S&F in repairs Soap dish, vitreous China white, approximate size 160x 160x90mm embedded in the wall

S&F in repairs bib tap fancy type chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed Make : Cat No. FLR-5273UPR of Jaquar or equivalent make as approved and as listed in PS

S&F sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing fixed in repairs complete all as specified and directed

S&F in repairs Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed

S&F 15 mm bore GI Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors

S&F 20 mm bore GI Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store

S&F in repairs UPVC/PVC (SWR) P trap 110mm dia complete all as specified.

S&F in repairs UPVC/PVC (SWR) Bend 110mm dia complete all as specified

S&F in repairs UPVC/PVC (SWR) door Bend 75mm dia complete all as specified

S&F in repairs UPVC/PVC (SWR) single T 75mm dia complete all as specified.

S&F in repairs UPVC/PVC (SWR) single T 110 mm dia complete all as specified

S&F in repairs UPVC/PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, fixed on walls complete all as specified and directed

S&F in repairs UPVC/PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

S&F in repairs UPVC/PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F in repairs UPVC/PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed on walls complete all as specified and directed

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F PVC (SWR) floor trap 75mm dia, plain with SS grating including jointing with solvent cement complete all as specified.

S&F in repairs Grating doom 100mm dia of PTMT/ SS. (Minimum weight 85gms) complete all as specified.

Dismantling boarding, any description, fixed in any position with nails

M&L for 0.9 mm thick colour/ white laminated sheet fixed to wooden surface with glue/adhesive complete all as specified and directed.

S&F of rotational moulded polythylene water storage tank triple layered (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 Litres including dismantling water tanks and removing to store complete all as specified and directed.

S&F in repair 20 mm Ball brass valves. high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repairs 25 mm dia brass ball valve, high pressure with polythene float and flynut complete screwed for iron pipeor brass ferrule complete all as directed.

M&L PCC 1:2:4 Type - B0(Using 12.50 mm graded aggregate ) as in padding concrete,covering etc on roofs,chajjas complete all as specified and as directed .

M&L for rendering 10mm thick in cement mortar 1:4 using water proofing compound on concrete surfaces of roofs incl parapets,chajjas etc & providing necessary slope.

M&L for Bitumen primer for use in waterproofing and damp-proofing treatments @ 0.40kg/Sqm Priming surfaces and applying normal treatment ( for moderate conditions ) except felt complete all as specified.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wave fabric (Wt not less than 150gm/sqm )land on primed surface by forced application complete all as specified.

Supply only Liquid water proofing compound for waterproof plastering complete all as specified.

M&L for Applying two coat of Aluminium paint over new surfaces of any description , over 10 cmm in width or girth not otherwise described.

Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified.

M&L for preparartion of new wall surfaces & applying two coat of distemper oilemulsion over a coat of alkali resistant primer over 3mm thick wall care putty in two layer complete all as directed.

M&L for Complete removal of existing treatment of external wall surfaces & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall/concrete surfaces of any height complete all as directed.

M&L for Complete removal of existing treatment of old plastered internal surfaces of wall and applying two coats of OBD over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed. .

M&L for Complete removal of existing treatment of old plastered ceiling surfaces and applying two coats of OBD over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed.

M&L for Complete removal of existing treatment of wall surfaces & applying three coat of white wash complete all as directed.

M&L for Complete removal of existing treatment of old celing surfaces & applying three coat of white wash complete all as directed.

M & L for Preparing old steel surfaces of any description exc 10cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for Preparing old wooden surfaces of any description exc 10cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for Preparing old wooden surfaces of any description nexc 10cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

PAVAN ENTERPRISES

A SOMA RAJU

SKY CONSTRUCTIONS

K LAKSHMAN SINGH AND CO

BEEGEE DESIGN SYSTEMS

Sri Associates