REPLACEMENT OF EXISTING AGE OLD 11KV SWITCHGEAR BY 25KA MEI MAKE, DAS AND SCADA COMPATIBLE OF 500MVA SWITCHGEARS AT 66/11KV SUB-STATION, CHANDRAPPA CIRCLE IN TL&SS DIVISION, NELAMANGALA ON PARTIAL TURNKEY BASIS.

REPLACEMENT OF EXISTING AGE OLD 11KV SWITCHGEAR BY 25KA MEI MAKE, DAS AND SCADA COMPATIBLE OF 500MVA SWITCHGEARS AT 66/11KV SUB-STATION, CHANDRAPPA CIRCLE IN TL&SS DIVISION, NELAMANGALA ON PARTIAL TURNKEY BASIS.

11KV UG Cable, 3Cx400Sqmm as per specification

Copper Control Cable, 19Cx2.5Sqmm

Copper Control cable, 4Cx4Sqmm

11 kV Heat Shrinkable termination Kit for XLPE Cable 3Cx400Sqmm Indoor Type

11 kV Heat Shrinkable termination Kit for XLPE Cable 3x400Sqmm Outdoor Type

Double Pole Structure complete including 50x6mm GI flat for Structure Grounding

H frame for Mounting GOS

11KV 400A, Double Break GOS

Supplying and providing 450mm dia x 450mm height 1.5" to 2" Hume pipe collars for earth pits including all leads and lifts.

Lightning Arrestor 9.6 kV, 5 kA Metal Oxide Ceramic Type with ground disconnector

Erection, alignment and fixing to the foundation, indoor/outdoor 11kV switchgear panel/unit including movement from the point of unloading to the point of erection.

Wiring & Assisting in testing and commissioning of 11KV indoor type breaker

Erection of Annunciation panel

wiring & assisting in testing and commissioning of Annunciation panel

Laying of 11kV Cables in existing trench/GI pipe/stoneware pipe/RCC Hume pipe using wooden/aluminum rollers.

Laying of 19x2.5Sqmm. control cables from equipments to control panels

Laying of 4x4 Sqmm. control cables from equipments to control panels

Erection of DP Structure

Erection of H frame

Fixing of Lightning Arrestors

Fixing of Heat Shrinkable Pot heads for HT Cables

Earthing using 50x6mm GI flat and connecting Equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending twisting, drilling of holes and connecting by welding (i...

Grounding of DP structure using CI pipe of 100mm ID, 13mm thickness, 2.75Mtrs long with 2-part clamp out of GI flat 50x60mm. continuously welded around the pipe using cast iron, welding electrodes as ...

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of

foundations and other similar works etc. in layers not exceeding 20cm in depth,

consolidating each deposited layer by r...

Providing Bricks(Modular)on top of cables for trenches as per specification including cost of all materials,labour,lead etc.,complete.

Spreading and forming Sand-M Sand to required level as per specification including cost of all materials,labour,lead etc.,complete

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Decommissioning and Dismantling of Easun Reyrolle(ERL) make 11 KV 25kA MCVCB Switchgears (1I/c+4F+1CB)

Releasing of 11 kv Link Bus panel.

Loading of dismantled old 11KV Switch gears and annunciator panel at 66/11kV Chandrappa Circle Sub-station

Un-Loading of dismantled old 11KV Switch gears Switch gears and annunciator panel at SRS Peenya store.

Releasing of Wiring of 11KV indoor type Switchgear

Decommissioning and Dismantling of Easun Reyrolle(ERL) of annunciator panel including movement from the point of erection to the point of loading

Releasing of Wiring of 11KV indoor type Annunciator panel

Transportation of released 11KV Switchgears and annunciator panel from 66/11 kV Chandrappa Circle Substation to Peenya stores (4 MT).