PROVN OF TOILETS AT 6 DOGRA , PROVN OF SHED WITH HARDSTANDING AT 52RR, REV WORK AT T-30 AND SPL REPAIR OF BLDG NO T-29 OF 319 FD HOSP AT PATTAN UNDER GE 969 EWS

Amount

S&F 0.63 mm, Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating. incl dismantling,complete all as specified and directed.

M&L two coat synthetic enamel paint on red oxide including preparation of new steel Surfaces of any description, over 10 cm in width or girth,not otherwise described,complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling,complete all as specified and directed.

Dismantling timber scantling 40 sq cm and over in section in any position as in unframed work,complete all as specified and directed.

M & L 2nd Class soft wood (Kail) as in scantling, clean swan timber framed and fixed,complete all as specified and directed.

All as per above Srl No 5 here-in-before but except timber,complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) and boarding any thickness, including cover fillets,complete all as specified and directed.

2nd class soft wood 20 mm thick in facia boarding fixed with nails in any situation planed one side with butt joints,complete all as specified and directed.

S&F 2nd Class softwood weather boarding clean swan, plain 20mm thick or feather edges 15mm to 20 mm thick and fixed with 30mm over laps,complete all as specified and directed.

All as per Srl No 9 here-in-before but except boarding,complete all as specified and directed.

M & L 4 mm thick veneered decorative plywood ,grade 1 (with BWR resin) with decorative face veneers on one faces,in wall fixed with screws to timber frame work,complete all as specified and directed.

M & L 4mm thick veneered decorative plywood ,grade 1 (with BWR resin) with decorative face veneers on one faces,in ceiling fixed with screws to timber frame work,complete all as specified and directed.

M&L for 5 mm thick printed PVC sheet instead of plain colour PVC sheet in strips & channel feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining, and solid PVC partions & Ceiling etc inclusive of solvent cement & fixing at site,complete all as specified and directed.

Dismantling timber scantling in fillets rails, posts purlins etc under 40 Sqcm in section in framed work,complete all as specified and directed.

S & F Second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 13 and not exceeding 25 Sq. cm,complete all as specified and as directed.

S & F Second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 6 and not exceeding 13 Sq. cm,complete all as specified and as directed.

S & F second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with nails, cross sectional area not exceeding 3 Sq. cm,complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level),complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5 graded aggregate) as in floors finished even and fair,complete all as specified and as directed.

M&L for light shade Vitrified tiles tiles 9 mm thick (square/rectangular) area of each tile n.exc 0.36 Sqm in floors set and jointed over and including cement screed base 15mm screed bed in CM 1:6 and pointed in white or coloured cement to match,complete all as specified and as directed.

75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement,complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site,complete all as specified and as directed.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames),complete all as specified and as directed.

S&F 30 mm thick 2d class soft wood glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats,complete all as specified and as directed.

S&F Aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws,complete all as specified and as directed.

MS Cold rolled Butt hinges medium weight 75 mm long,complete all as specified and as directed.

S&F mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed 200 mm long,complete all as specified and as directed.

S&F Aliminium anodised barrel tower bolts, 150 mm long,complete all as specified and as directed.

S&F mild steel pressed handles, oval type ISI marked stove enamelled black complete all as 150mm size,complete all as specified and as directed.

S&F Aluminium anodised handles, cast type anodised 125 mm long,complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.46 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple,complete all as specified and as directed.

Hacking out old broken glass from wooden/metal frame of any thickness incl punching or drilling out old glazing pins/springs clips and providing and fixing new ones,complete all as specified and as directed.

M & L sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames,complete all as specified and as directed.

All as per item No 33 above but pin head type, figured glass,complete all as specified and as directed.

Preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic enamel paint,complete all as specified and as directed.

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer,complete all as specified and as directed.

S&F single leaf frameless glazed door with 12mm thick toughened glass door,edged polished around, hung type, frosted with designer logo(any pattern, approx frosted area 1.6 Sqm ) including taking down existing door with frame of any description and necessary glass hardware for new as appended below compete all as specified and directed:- (a) SSS handle 'D' type on both leaf glass shutter and both face (CAT No :- OGH-11,Make OZONE or equivalent), size (25mm x 450mm) (b) Path with Pivot with complete accessories for swing door as required (c) Concealed floor spring for glass door (for max door width 1000mm) (Cat No OCFH-100, Make OZONE or equivalent) with accesories (d) Patch lock to lock swing door with accesories (g) Making good of wall surface to match with existing surface complete. Note:-(All the glass hardware make of 'OZONE' or its equivalent )

S&F in repair 10mm thick toughened glass, edged polished around, fixed type alongwith powder coated aluminium anodised frame size 85 x 44 x 1.98 including SS cleat and necssary hardware ,making good of wall surface to match existing surface,complete all as specified and as directed.

S & F Powder coated aluminium coloured decorative pattern (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

M & L for Plywood 19/20mm thick , grade BWP, type BB fixed with screws to timber frame work as moduler works cabinets,complete all as specified and as directed.

M&L Decorative laminate 0.9mm type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions,complete all as specified and as directed.

S&F Butt hinges, 65mm cast brass, with mild steel hinge pin, bright polished and fixed, typeB-12, 65mm long fixed,complete all as specified and as directed.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished,complete all as specified and as directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil,complete all as specified and as directed.

Excavation in trenches in any type of soil, n exc 1.5 M wide and n exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil,complete all as specified and as directed.

Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm,complete all as specified and as directed.

Removing of excavated soil not exceeding 50m and depositing where directed at a level not exc 1.5 M above the starting point,complete all as specified and as directed.

M&L Plain Cement concrete Type D-2, 1:4:8 (40mm graded aggregate), in foundation, filling and mass concrete,complete all as specified and as directed.

M & L Brick work with sub class 'B' bricks (old size bricks) straight on curved on plan exc 6 M mean radius built in CM (1:4),complete all as specified and as directed.

M & L brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in built in CM (1:4),complete all as specified and as directed.

M & L Rendering 10 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement,complete all as specified and as directed.

M & L Rendering 15 mm thick in cement and sand mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing with using integral waterproofing compound @ 3% by weight of cement including finishing the surface even and smooth without using extra cement complete all as specified. (Note - W P C shall be measured and paid separately).

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint,complete all as specified and as directed.

M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface,complete all as specified and as directed.

M&L 75 mm thick Cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring,complete all as specified and as directed.

M & L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as sub base,complete all as specified and as directed.

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement and sand mortar (1:4),complete all as specified and as directed.

M & L Glazed ceramic tile 450 x 300 x 6-7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar (1:4),complete all as specified and as directed.

S & F Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc,complete all as specified and as directed.

M & L Preparation of new steel surfaces of any description over 10 cm width or girth and priming with red oxide zinc chrome and painting with two coats of synthetic enamel paint on Steel sheeting as in roofing, complete all as specified and as directed.

M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as etc,complete all as specified and as directed.

S & F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2010 as specified,complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item,complete all as specified and as directed.

S&F steel ventilators with top hung shutter including hinges steel peg stay, squares no.exc 0.50 Sqm in each pane,complete all as specified and as directed.

S & F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked,complete all as specified and as directed.

S & F 150mm long aluminium anodised, barrel tower bolt ISI marked,complete all as specified and as directed.

S & F 150mm long aluminium anodised cast type alumiinium handle ISI marked,complete all as specified and as directed.

S & F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110 mm bore of pipe,complete all as specified and as directed.

S & F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore,complete all as specified and as directed.

S & F for PVC (SWR) gully trap, plain with grating including jointing with solvent cement 110 mm bore,complete all as specified and as directed.

S&F vitreous chine wash down water closet pan ( Pedestal pattern) white or coloured excluding flushing cistern and flush pipe, including seat cover incl provision of concrete/ white cementing and P or S trap in repairs,complete all as specified and as directed.

S&F Water closet (Orrissa pattern) complete including provision of lime concrete bedding including vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) in repairs,complete all as specified and as directed.

S&F vitreous china urinal, Half Stall type, white (excluding flusing cistern, flush pipe and waste pipe,complete all as specified and as directed.

S&F in repair vitreous china wash basin, white flat back size 550x400 mm plug, porcelain stopper and incl brackets with waste fittings and connection pipe etc including pedestal,complete all as specified and as directed.

S&F Tubular towel rail brass chromium plated 20mm dia D-Type 60cm long between flanges, including brackets and fixed to walls,complete all as specified and as directed.

S & F PVC connection 15 mm size, of length 450 mm, with PTMT nuts supplied and fixed,complete all as specified and as directed.

S&F 15mm bore Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed,complete all as specified and as directed.

S & F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms),complete all as specified and as directed.

S&F 15mm bore Angle valve, fancy type chromium plated high pressure with crutch or butterfly handle screwed both ends for iron pipe,complete all as specified and as directed.

S&F mild steel framed work such as grills, frame work of water taks FE 290 Gde E-165,complete all as specified and as directed.

S&F 3 layer PPR pipes 25mm dia abore SDR 7.4 & SDR 11 UV staablished and antimicrobial welded having thermal stability for hot and cold water,complete all as specified and as directed.

S&F 3 layer PPR pipes 20mm dia abore SDR 7.4 & SDR 11 UV staablished and antimicrobial welded having thermal stability for hot and cold water,complete all as specified and as directed.

S&F 1000 Ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed.

S&F 25mm PPR Gate valve inserted as per requirement of site,complete all as specified and as directed.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min weight 20mm-210 gms),complete all as specified and as directed.

M&L pre-cast cement concrete Type B-1, 1:2;4, (20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands etc,complete all as specified and as directed.

S & F soap dish chromium plated, fixed to plugs with chromium plated brass screws,complete all as specified and as directed.

M&L for granite (of any type) 20mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including,complete all as specified and as directed.

S & F for 4 mm thick figured glass pin head ftype and glazing with oil putty in squares n.exc 0.5 sqm in each pane,complete all as specified and as directed.

Supply only integral water proofing compound,complete all as specified and as directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out from hard and dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 in foundations, filling and mass concrete,complete all as specified and as directed.

Removing Excavated soils exceeding 250 M but not exceeding 500 M and depositing,complete all as specified and as directed.

M&L for Cement concrete 1:2:4 type B using 40mm graded stone aggregate in foundations, filling and mass concrete,complete all as specified and as directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240,complete all as specified and as directed.

S & F Roof trusses (framed) trussed, Purlis, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee, angle channel or flat sections) includign distance pieces, cleats etc conforming to Fe - 410-W (Gde- E-250) quality-A,complete all as specified and as directed.

M&L steel iron base plate plugs, bolt and screw of Fe-410W (Gde-E-250 quality-A),complete all as specified and as directed.

100 mm thick Cement Concrete Type D2 1:4:8 (using 40 mm graded aggregate) mass concrete in flooring,complete all as specified and as directed.

M&L for 150 mm thick Cement concrete type B 1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in flooring/hardstanding and finishing cement concrete surface even and smooth,complete all as specified and as directed.

M&L for 20mm thick Wearproof topping as specified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth using with power floater (except metallic hardner) complete all as specified.

Supply only metallic floor hardner ,complete all as specified and as directed.

Forming contraction dummy joint of 65mm deep x 10mm wide filled with sealing compound of grade 'A',complete all as specified and as directed.

Forming 12 mm thick expansion joints on 150 mm thick concrete slab filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound grade 'A',complete all as specified and as directed.

Preparation of new previously untreated steel surfaces of any despcription, over 10 cm width or girth, otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer,complete all as specified and as directed.

Construction of LLDPE septic tank for 20 user conventional type, exe inordinary siol foundation in PCC 1:2:4 brick work in CM 1:4 RCC slab covers including including RCC precast manhole cover having vent shaft and sludge chamber etc,complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregates as in bed to drain pipes including packing under and haunching against the sides of pipes after these are laid tested for 150 mm bore of pipes,complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor,complete all as specified and as directed.

Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.20 m dia x 4.50 m deep.complete all as specified and shown in drg No.CESZ/TD-1080/2011

Excavation in trenches in any type of soil, n exc 1.5 M wide and n exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil,complete all as specified and as directed.

M&L PCC 1:3:6 type C-2 using 40mm graded stone agg in foundation and mass concrete,complete all as specified and as directed.

M & L Brick work with sub class 'B' burnt bricks (old size bricks) straight on curved on plan exc 6 M mean radius built in CM (1:4),complete all as specified and as directed.

M & L 1:2:4 types B-1 (using 20 mm graded stone agg as in coping etc,complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with WPC, finished even and smooth complete. (WPC shall be measured and paid separately),complete all as specified and as directed.

Supply only integral water proofing compound, complete all as specified and directed.

Mild steel TMT bars 10mm mm dia and over, cut to length, bent to shape required including cranking , bending and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and as directed.

M & L precast RCC man holes cover in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate,complete all as specified and directed.

Removal of excavated n.exc 50m & depositiong where directed at a level n.exc. 1.5 m above the starting point in soil,complete all as specified and directed.

M&L 75 mm thick Cement concrete type D-2 1:4:8 (40mm graded aggregate) as in sub base of flooring/hard standing,complete all as specified and directed.

M&L for machine pressed precast interlocking paver block any shape ans size confirming to -15658 - 2006 of 60mm thickness, M-35 Grade, laid on sand chshioning,with frey cement and no pigment,complete all as specified and directed.

M&L sand filling under or in foundations including watering and consolidation,complete all as specified and directed.

M&L Providing cement concrete B1 1:2:4 ( 20 mm graded aggregate) in kerb rounded or chemfered on edges, complete all as directed.

Taking down carefully any type point wiring (light, fan, socket or power) complete including conduits/casing- capping with fittings such as light fittings, sockets, switches ceiling roses, board outlets etc and removing the materials/ debris and making good the disturbed surfaces of walls, floor etc to match with the existing surface, complete all as specified and as directed.

M&L Point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked conduit conceled in wall/ceiling all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :- Note: Contractor must do internal wiring with cheasel cutting in wall/ceiling and fixed conduit and repair surface with plaster 15MM in wall/ceiling and make surface good as it is.

(a) One light point/fan point/Ex fan point controlled by one 5 Amps switch one way

(b) One 3 pin 5 Amp switch socket outlet on independent board

(c) One 3 pin 5 Amp switch socket outlet on same board with accessories

M&L Point wiring complete with FRLS 1100 Volts grade, 2.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 20 mm medium grade ISI marked conduit conceled in wall/ceiling all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 2.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :- Note: Contractor must do internal wiring with cheasel cutting in wall/ceiling and fixed conduit and repair surface with plaster 15MM in wall/ceiling and make surface good as it is.

S&F switch piano Flush type, single pole, one way 6 amp 240 volts,complete all as specified and directed.

S&F switch piano Flush type, single pole, 15 amp 240 volts, complete all as specified and as directed

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete with gang box all as specified and as directed

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete with gang box all as specified and as directed.

Supply and fix ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body all as specified and directed

Supply & Fixing in repair Modular switch single pole one way 6 Amps 1 module 240 V,complete all as specified and as directed.

Supply & Fixing in repair Modular Socket, 6A - 2/3 pin combined 2 module 240 V,complete all as specified and as directed.

Supply & Fixing in repair Modular Switch socket Combination 16A, 6 pin, 3 module 240 V,complete all as specified and as directed.

Supply & Fixing in repair Modular White cover plate with frame, 8 module

S&F in repairs Distribution Board, SPN 8 Way, Double door,complete all as specified and directed.

S&F in repairs Distribution Board, SPN 12 Way, Double door,complete all as specified and directed.

S&F in repairs MCB, DP 40 Amps 240 volts 'B' curve, complete all as specified and as directed.

S&F in repairs MCB, SPN 32 Amps 240 Volts C curve, complete all as specified and as directed.

S & F in repairs MCB,SPN 63 Amps 240 Volts B curve, complete all as specified and as directed

S & F MCB Single pole 6-32A Amps 240 Volts B Curve,complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose,complete all as specified and directed.

S&F LED light fitting 1x10 bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size,complete all as specified and directed.

Supply and fixing LED bulb 12 W, 220V suitable size from ceiling rose,complete all as specified and directed.

Supply and fixing LED bulb 15 W,complete all as specified and directed.

S&F Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting,complete all as specified and directed.

Supply and fix XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sq mm , 2 Core,complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core, complete all as specified and as directed.

S&F Stepped type electonic fan regulator flush type on the existing phenolic laminated sheet,complete all as specified and directed.

Supply & fixing in repair capacitor 1.5/2 mfd suitable for 1200mm sweep ceiling fan,complete all as specified and directed.

M & L sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 6 sqmm and one run of 6 sqmm cable and one run of casing capping shall be measured as one RM

Taking down and dismantling the ceiling fan from site and removing its allied smaller parts for cleaning, servicing, oiling and lubricating and replacement of unserviceable parts such as bearings, bushes, etc and refixing the same fan in its original position with all the parts i.e. down rod, canopies, fan blades, spilt pins, screws, nuts and spring washers complete including, flexible chord of 24 / 0.20mm with necessary connector (for blade / body) as required after rewinding complete all as specified and directed. Note : Spares used and rewinding shall be measured and paid seperatly under relevant item.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated Supply Supply and fix complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

Supply and fix exhaust fan made of plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep/brisk air fan of size 300 mm sweep, non matallic, complete all as specified and as specified and as directed.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.5 of SSR 2020 part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 6 mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc

Note:- Schedule of credit Rs 38,494.20 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

QAZI SONS (BID ID -3345351)

MS DUTTA BUILDERS (BID ID -3346972)

M/S JAVID AND CO (BID ID -3354693)