Supply, Installation and Commissioning of Pre-Lasting and Lasting Machines for footwear prototype making

Amount

SUPPLY, INSTALLATION AND COMMISSIONING OF PRE-LASTING AND LASTING MACHINES FOR FOOTWEAR PROTOTYPE MAKING

Toe lasting machine (Pulling over, Toe & Forepart Lasting Machine, Hydraulic, Automatic, 9 pincers, Teflon) - 1 No. • Each set of pincers (left and right) should have setting with automatic pulling and manual operated. • The upward stroke of the last support should have adjustable knob which should be placed outside the machine • Two step upward movement functions for the last support. • The toe pusher mechanism should be designed with adjustable two step pressure. • During the movement of the initial pressure, two ways (pressure controlled or position controlled) set • Hot melt adhesive automatic feeding • The forward movement of the wiper should be adjustable • Number of Pincers: 9 nos • Pump Motor power maximum of 1.5 KW • Maximum Power Consumption 4 KW • Three phase AC power • Oil Pressure 50 kg/cm2 • Capacity of minimum of 180 pairs/hour • Oil Filling maximum of 120 liters • Weight maximum 1200 kgs • Dimensions maximum 1800 x 1000 x 2050 mm • With minimum 3 years warranty

Heel Seat Cement Lasting Machine - 1 No. • The machine electrical system Electronic Control Panel, • Machine should equipped with the device of lasting height micro switch, easy adjustment and positioning accurately. • Full sizes of wipers and forming bands, which should fit any shapes of shoes. • Gears, gear racks and ratchets to quickly and precisely adjust the auxiliary supporter. • The second time pressing of the last supporter should work with the wiper heating device to increase the lasting effect. • Power maximum 2 HP • Three phase AC power • Heating Power maximum 1.0 KW • Oil Pressure 40 kg/cm2 • Oil Filling 50 liters • Weight maximum 450 kgs • Dimension maximum 1000 x 750 x 1500 mm • With minimum 3 years warranty

Insole attaching Station - 1 No. • Standing type insole attaching machine • Thermo cement heater with individual on/off switch • Power maximum 0.1 kw • With minimum 3 years warranty

Hot Air Blower - 1 No. • Setting for temperature adjustment. • Adjustable Steam quantity • Stainless steel boiler and • Pedal to Iron with steam • Power maximum 5.5 kw • Average power 2.5 kw/hr • Voltage 440 v – 3 phase • Weight maximum 130 kgs • Dimension maximum 1100 x 750 x 1750 mm • With minimum 3 years warranty

Installation and Commissioning charges

Packing and Forwarding charges