Renovation works at ICMAI COE Hyderabad

S.NO Ref DSR- Description of Item Unit Total Qty DSR Rate Correction DSR Rate NDSR Rate DSR Amount NDSR Amount Total (In

2023/ MR Factor including with GST with GST with GST (In Rupees)

0.973 Cost Index (In Rs.) Rs.)

FINISHING WORK- Rctification of Plaster of Outer Surface

13.4 12 mm cement plaster of mix

13.12 18 mm cement plaster of mix : -

FINISHING WORK- Painting of Outer Surface

3 13.26 Providing and applying plaster of paris putty of 2mm thickness over plastered surface

to prepare the surface even and smooth complete. 5,000.00 262.70 255.61 283.72 14,18,619.41 -

13.45 Finishing walls with textured exterior paint of required shade -

4.0 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming

coat of exterior primer applied @ 2.20kg/10 sqm 13,500.00 223.60 217.56 241.49 32,60,178.56

13.57 Paintting with oil type wood preservative of brand and manufacture: -

13.52 Finishing with Epoxy paiöt (two or more coats) at all locations prepared and applied

as per manufacturer's including appropriate priming coat, preparation of surface, etc.

FINISHING WORK- Painting of Internal Surface

7 13.50.3 With ready mixed red oxide zinc chromate primer of approved brand and

manufacture on steel galvanised iron/ steel works 1,450.00 67.40 65.58 72.79 1,05,551.33 -

Wall painting with premium acrylic emulsion paint of interior grade, having VOC

(Volatile Organic Compound ) content less than 50 grams/ litre of approved brand

and manufacture, including applying additional coats wherever required to achieve

even shade and colour. -

13.97 Painting with oil type wood preservative of approved brand and manufacture:

Digitally signed by DEEPAK

PROJECT :- PROPOSED RENOVATION WORKS AT ICMAI, FINANCIAL DISTT, HYDERABAD.

S.NO Ref DSR- Description of Item Unit Total Qty DSR Rate Correction DSR Rate NDSR Rate DSR Amount NDSR Amount Total (In

2023/ MR Factor including with GST with GST with GST (In Rupees)

0.973 Cost Index (In Rs.) Rs.)

WATER PROOFING WORK

Providing and laying water proofing treatment in sunken portion of WCs, bathroom

etc., by applying cement slurry mixed with water proofing cement compound

consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with

water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air

cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with

water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air

cure for 4 hours followed with water curing for 48 hours. (The rate includes

preparation of surface, treatment and sealing of all joints, corners, junctions of pipes

and masonry with polymer mixed slurry.)

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with

grey cement slurry mixed with pigment to match the shade of the slab, including

rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12

mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with

grey cement slurry mixed with pigment to match the shade of the slabs, including

rubbing and polishing complete sqm 5.00 2,354.70 2,291.12 2,543.15 12,715.73 -

13.00 11.24 Extra for pre finished nosing to treads of steps of marble / granite stone. sqm 35.00 719.19 699.77 776.75 27,186.14 -

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified

by the manufacturer) with water absorption less than 0.08% and conforming to

IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm

thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry

11.41A @3.3 kg/sqm including grouting the joints with white cement and matching pigments

etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles

will be done with the notch trowel, plier, wedge, clips of required thickness, leveling

system and rubber mallet for placing the tiles gently and easily

11.41A.2 Glazed vitrified floor tiles polished finish of size -

Digitally signed by DEEPAK

PROJECT :- PROPOSED RENOVATION WORKS AT ICMAI, FINANCIAL DISTT, HYDERABAD.

S.NO Ref DSR- Description of Item Unit Total Qty DSR Rate Correction DSR Rate NDSR Rate DSR Amount NDSR Amount Total (In

2023/ MR Factor including with GST with GST with GST (In Rupees)

0.973 Cost Index (In Rs.) Rs.)

Providing and laying Vitrified tiles in different sizes (thickness to be specified by

manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622,

of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick

bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry

@ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments

etc. complete. -

Grouting the joints of flooring/wall tiles having joints of 3 mm width, using epoxy

grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and

0.20 kg of resin per kg), including filling /grouting and finishing complete as per

direction of Engineer-in-charge. -

Providing and laying Polished Granite stone flooring in required design and patterns,

in linear as well as curvilinear portions of the building all complete as per the

architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base

of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry

and pointing with white cement slurry admixed with pigment of matching shade

including rubbing, curing and polishing etc. all complete as specified and as directed

by the Engineer-in-Charge :

11.56.1 Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent -

Digitally signed by DEEPAK

PROJECT :- PROPOSED RENOVATION WORKS AT ICMAI, FINANCIAL DISTT, HYDERABAD.

S.NO Ref DSR- Description of Item Unit Total Qty DSR Rate Correction DSR Rate NDSR Rate DSR Amount NDSR Amount Total (In

2023/ MR Factor including with GST with GST with GST (In Rupees)

0.973 Cost Index (In Rs.) Rs.)

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size

595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing

of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia

18 12.52.2 holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester

powder coated of thickness 60 microns (minimum), including factory painted after

bending and perforation, and backed with a black Glass fiber acoustical fleece.

Total of Flooring & Roofing Work 23,91,294.83

ALUMINIUM WORKS

19 21.10 Providing and fixing double glazed hermetically sealed glazing in aluminium

windows, ventilators and partition etc. with 6 mm thick clear float glass both side,

having 12 mm air gap, including providing EPDM gasket, perforated aluminium

spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per

specifications, drawings and direction of Engineer-in-charge complete.

20 21.1.2.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions

with extruded built up standard tubular sections/ appropriate Z sections and other

sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash

fasteners of required dia and size, including necessary filling up the gaps at junctions,

i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.

Aluminium sections shall be smooth, rust free, straight, mitred and jointed

mechanically wherever required including cleat angle, Aluminium snap beading for

glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural

drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash kg 4,033.64 634.45 617.32 685.23 27,63,951.10

21 NS Providing and fixing glazing of 8mm toughened glass in aluminium door, window,

ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc.

complete as per the architectural drawings and the directions of engineer-in-charge .

21.8 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by

providing weather silicon sealant over backer rod of approved quality as per

architectural drawings and direction of Engineer-in-charge complete.

Digitally signed by DEEPAK

PROJECT :- PROPOSED RENOVATION WORKS AT ICMAI, FINANCIAL DISTT, HYDERABAD.

S.NO Ref DSR- Description of Item Unit Total Qty DSR Rate Correction DSR Rate NDSR Rate DSR Amount NDSR Amount Total (In

2023/ MR Factor including with GST with GST with GST (In Rupees)

0.973 Cost Index (In Rs.) Rs.)

10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing

in position and applying a priming coat of approved steel primer using structural steel

In as required.

gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 3,230.29 172.60 167.94 186.41 6,02,168.62

24 NS Providing and fixing Aluminium cladded panel (ACP) in curvilinear sections of required

shape and filing the gaps in between by providing weather silion sealent of approved

quality as per architectural drawing and direction of engineer in charge

Total DSR Total NDSR

Total for façade works 67,06,072.32

Grand Total 2,40,51,501.57

Grand Total 2,40,51,501.57

Digitally signed by DEEPAK