civil works

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls

a) Floor finish and dadooing walls in cement mortar with mosaic tiles/glazed tiles/cuddapah slabs

b) Dismantling of Brick work with cement mortor

Cement concrete 1:5:10 (one cement, five crushed stone sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification and as directed by the University Engineer.

Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specifications and as directed by the University Engineer.

Painting the old wall with one coat of ready mixed plastic emulsion paint of first class quality and of approved colour including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Providing and filling the tile joint with epoxy grout with following specification: Surface preparation including cleaning the joint to be free from dust and loose particles. Providing masking tape on either side of the tile joint edges and providing sealing the tile gap with epoxy tile joint grout and finishing neatly and as directed by the University Engineer. The rate inclusive of cost of materials and labour, etc., complete complying with standard specification and as directed by the University Engineer.

Supplying and fixing in position of Solid PVC DOOR SHUTTERS using 19 gauge 19mm MS Sq. tubes for styles and outer frames. 15 mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The overall size of styles shall be 50 x 30 mm.The overall size of top rail, lock rail and bottom rail shall be 75 x 30 mm.The overall size of frames shall be 50 x 45 mm, with suitable rabate for housing the shutter. etc., complete as directed by theUniversity Engineer.

a) Door with frame

b) Door without frame

Supplying and fixing in position best quality PVC soil /waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the University Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level.

a) for 75mm dia pipe

b) for 110mm dia pipe

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the University Engineer before use on works).

a) PVC elbow with door i) 75mm dia

ii) 110mm dia

b) PVC Elbow i) 75mm dia

ii) 110mm dia

c) PVC Tee i) 75mm dia

ii) 110mm dia

Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to BIS (sch-80) of the following dia including cutting, threading and fixing PVC specials using UPVC adhesives (but exculding cost of such specials) and fixing into wall with teak wood plugs, UPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work/ cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by University Engineer before use on works. (Internal water supply)

i) 25mm dia

Supplying and fixing in position the following UPVC Specials of heavy type and approved quality and good variety excluding fixing charges but including necessary cutting and threading of UPVC pipes, jointing the UPVC specials and jointing the specials with pipe line using UPVC solvent etc., complete complying with standard specification. (The UPVC specials should be got approved by the University Engineer before use on works.)

a) UPVC elbow 25mm dia

b) UPVC TEE 25mm dia

c) UPVC Reducer - 25 x 20

d) UPVC Reducer Elbow - 20 x 15

e) UPVC Reducer Tee - 20 x 15

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the University Engineer before use on work.

Gate valve

ii) 40mm dia

iii) 50mm dia