PROVN OF DEFICIENT TOILET, SOAKAGE PIT AND SPL REP OF ACSR CONDUCTOR AT TREHGAM, NIYARI AND CHOWKIBAL UNDER GE 874 EWS

Amount

Surface excavation n.exc 30 cm deep and average 15cm deep and getting out soft/ loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc in soft/loose soil complete all as specified and directed.

M&L for plain Cement concrete as in foundation, filling & mass concrete type D2 1:4:8 (using 40 mm graded aggregate complete all as specified and directed.

M&L for brick work with sub class 'B' brick straight or curved on plan etc 6 mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L for walling of random rubble masonry, well bonded, bedded and solidly hearted, built in CM (1:4) complete all as specified and directed.

Returning and filling including spreading levelling watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed.

Removal of excavated materials not exc 50cm and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 complete all as specified and directed.

M&L mild steel TMT bars 6 to 8mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 complete all as specified and directed.

M&L for RCC M-25 Design mix using 20 m graded aggregate for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M-25 Design Mix using 20 mm graded stone aggregate for Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC M-25 design mix using 20 mm graded stone aggregate for beams, cantilevers & lintel beams etc complete all as specified and directed.

M&L for RCC M-25 design mix using 20 mm graded stone aggregate for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for Square, Circular rectangular on plan or polygonal flat rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for 15mm thick CM 1:4 plastering to fair faces of brick masonry wall surface and finished even & smooth with using water prooing compound as per manufacturer instructions complete all as specified and directed. Note: Water proofing compound shall be measured and paid seperately.

M&L for 15mm thick rendering in CM 1:6 as in others than fair face of brick masonry walls and finished even & smooth complete all as specified and directed.

M & L for mild steel roof trussed (framed) purlins crane gantries rail & fastening and heavy bracket (beam tea angle channel or flat section) including distance pieces cleats etc complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a priming coat with red oxide over steel surface over 10 cm width or girth complete all as specified and directed.

M & L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an color having tensile strength of 550Mpa as in roof covering /cladding to wall , fixed with self tapping screws complete all as specified and directed.

M & L for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall , fixed with self tapping screws complete all as specified and directed.

M & L for applying two coats of cement based paint on external wall surfaces over a coat of primer including preparation newly plastered surface complete all as specified and directed.

M&L for preparing the new plastered surfaces of walls up to any height and applying two coats of oil bound distemper over and including a coat of 2-3 mm thick wall care putty complete all as specified and directed.

M&L Moorum/red bajri filling in floors or paving, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for hard core filling under floor, breaking stone or boulder n exc 63mm gauge of sand stone complete all as specified.

M&L for 75mm thick PCC type D2 1:3:6 (40 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for coloured glazed ceramic tiles (300 x 200mm) x 7mm thick as in vertical surfaces such as skirting, dados etc jointed in neat cement slurry and pointed in white or coloured cement to match, set and jointed in neat cement slurry and over 15mm thick backing coat in CM (1:4) laid, complete all as specified and directed.

M&L Non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm and n.exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:4) laid over and including 25mm thick PCC (1:2;4) type B1 using 20 mm graded crushed stone aggregate, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plaint colour PVC sheet reinforced with MS square tube, and fitted in opening complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (style) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site complete all as specified and directed.

S&F for 2nd class soft wood, plain, solid, straight chowkats or frames, wrought framed rebated on the solid, rounded or chamfered, put together with flue pinned at joints complete all as specified and directed.

M & L for plain framed panelled shutter 2nd class soft wood 30mm thick (any number of panel) with panel of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats 35mm thick second class soft wood (Kail) complete all as specified and directed.

S&F Galvanized mild steel wire cloth having 0.56mm dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete with glazing bars, dove tailed or welded including one shop coat of zinc chrome primer complete all as specified and directed.

S&F Sheet glass ordinary quality 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, in repairs complete all as specified and directed.

M & L for mild steel butt hinge medium weight cold rolled 100mm size complete all as specified and directed.

M & L for mild steel butt hinge medium with cold rolled 75mm size complete all as specified and directed.

S&F Mild steel pressed handle, oval type stove enamelled, black size of handle 150mm complete all as specified and directed.

S&F Mild steel pressed handle, oval type stove enamelled, black size of handle 100mm complete all as specified and directed.

Mild steel tower bolt stove enamelled black 150mm long black with bright bolt and fixed complete all as specified and directed.

Mild steel tower bolt stove enamelled black 100mm long black with bright bolt and fixed complete all as specified and directed.

S&F MS flat iron as in hold fast complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection surfaces finished even and fair complete all as specified and as directed.

M & L for mild steel sliding door bolts stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate 200mm long complete all as specified and directed.

M&L two coat of synthetic enamel paint over one coat of pink primer by preparing of new wooden surfaces of any description, not otherwise described over 10cm width or girth complete all as specified and directed.

S&F steel tubing galvanized iron medium grade with all fitting laid in concealed, trenches, floors or fixed to walls or ceiling, in any length, bore of pipe 15mm complete all as specified and directed.

All as per Srl. item No. 50 here-in-before but bore of pipe 20mm.

S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed with 20mm dia complete all as specified and directed.

M & L for Vitreous China wash basin, vertically mounted fancy bowl flat back size 550 x 400 m including waste pipe and coupling 32mm for basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including MS brackets& waste pipe complete all as specified and directed.

M&L for Vitreous china squatting Pan "Orrisa Pattern" size 580 x 440mm white with integral foot rests including flush pipe of PVC 32mm dia for low level cistern fixed in repair complete all as specified and directed.

S&F vitreous China bowl urinal flat back, size jof 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F PVC valve-less symphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets (10 Ltr) capacity fixed in repair complete all as specified and directed.

S&F soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed.

S&F PVC connection 15mm dia and 600mm long with PTMT nuts and washer complete all as specified and directed.

S&F stop valve 15mm bore, cast copper alloy screwed down, high pressure, with crutch jor butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

M & L for CP Pillar taps, with capstan head chromium plated 15 mm bore fancy type complete all as specified and directed.

S & F Waste coupling of PTMT (half or full thread). (Minimum weight 32 mm-45 gms / 40mm-60gms) for 32mm bore dia of discharge pipe fixed to WHB, sink complete all as specified and directed.

S&F bib tap cast copper alloy chromium plated fancy type with crutch of butterfly handle, screwed down, screwed for iron pipe of for brass ferrule of 15mm bore (ISI marked) complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified and directed.

S&F PVC gully trap square or round mouthed type (P) , size of trap 125x 110mm and jointing to drains with solvent cement in repairs complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified and directed.

M&L for PVC (SWR) WC connector with lip ring 110mm complete all as specified and directed.

M&L for PVC (SWR) vent cowl for 75 mm dia complete all as specified and directed.

M&L for PVC (SWR) Reducer 110/75mm dia complete all as specified and directed.

M&L for AC plain sheet ceiling 4mm thick on aluminium grid work 60cmx60cm with using 36.5mmx23.5mmx1.5mm thick main tee, 23.5x 23.5x1.28mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 3.0mm dia GI wire and ‘J’ bolts washer nuts for securing frame work to ceiling suspended @ 120 Cm C/C both ways, size of grid shall be 610x610mm, including two coats of oil bound distemper of over one coat of primer and preparation of surfaces complete all as specified and directed.

M & L for lagging on pipe of internal dia 15mm used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and directed.

M & L for lagging on pipe of internal dia 20mm used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9843 complete all as specified and directed.

S& F towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed.

S& F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 Ltr capacity hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S & F for 20 mm dia ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass and fixed complete all as specified and directed.

S & F 20 mm bore stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

M&L for providing 100mm thick cement concrete type B-1, 1:4:8 (40mm graded aggregate) complete all as specified and as directed.

M & L for sand filling under floor or in foundation including watering and consolidation complete all as specified and as directed.

M&L 60mm thickness, M-35 grade, machine pressed precast concrete interlocking paver glazed finished coloured block any shape and size conforming to IS 15658-2006, set and jointed with grey cement and pigment complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregates as in cills, lintels, upto 1.50 metre clear span, copings, benching, bed plates etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form works complete all as specified and as directed.

S&F 100 mm bore PVC (SWR) Bend (any radius) complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) Bend (any radius) complete all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 and finished even and fair without using extra cement complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-I using 20 mm graded stone aggregate as in cover slabs, (for man holes) chullah hoods, chajjas, shelves and similar articles with plain faces and set in mortar 1:6 complete all as specified and directed.

S&F mild steel framed work such as door or gates of angle or other section with gusset plates, rails braces etc., with ornamental and intricate design complete. drilled for fixing for steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges and hanging, also fastening and fixing including shop coat of zinc chromate paint conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L for construction of 50 users septic tank complete all as specified and shown on drawing No. CESZ-TD-/2015 sheet No 1/3 & 2/3 dated 22 Feb 2015 (Revised dt 21 Mar 2015) and specified in particular specifications.

M&L for construction of Soakage well, of size 1.8 m dia at bottom and 3 m effective depth complete all as specified and shown on drawing No. CESZ-TD-/2015 sheet No 1/3 & 3/3 dated 22 Feb 2015 (Revised dt 21 Mar 2015) and specified in particular specifications.

M&L for construction of Soakage well, of size 3.00 m dia at bottom and 4.5 m effective depth complete all as specified and shown on drawing No. CESZ-TD-/2015 sheet No 1/3 & 3/3 dated 22 Feb 2015 (Revised dt 21 Mar 2015) and specified in particular specifications.

M & L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed.

M & L 150mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

M & L 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

M & L for concrete bed to drain pipes of PCC(1:3:6), type C-2, including packing under and completely surrounding pipes with concrete after they are laid and tested; in for 150 mm bore pipe complete all as specified and as directed.

M & L for supply only integal water proofing compound complete all as specified and as directed.

Material and labour point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade,and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0mm thick hylam sheet cover fixed with brass screw complete with all accessories for on light point/ Fan point controlled by one, 1-Way switch.

All as per item No 96 mentioned here-in- above but one 5 pin 5 Amps socket out let on independent board with 1.5 sq mm PVC insulated copper conductor for continuous earthing complete.

All as per item No 96 mentioned here-in- before but 6 pin15 Amps socket outlet on independent board with 4 sq mm PVC insulated and sheathed copper conductor with 4 sq mm PVC insulated copper conductor single core for continuous earthing complete.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.

M & L for Switch socket combination 2 in 1, 3 pin, 6 Amps flush type complete all as directed.

M & L for Switch socket combination 5 in 1, 3 pin, 6 Amp and 16 Amps flush type universal complete all as directed.

Supply and fix water heater storage type , electric capacity 25 ltr along with all accessories BEE 5 star rated, complete all as specified and directed.

M & L for ceiling rose, PVC/Polycarbonate three terminals complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F in replacement LED light fitting 1x9W/10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F of Exhaust fan 250 mm Sweep with louver shutters, Plastic exhaust fan AC 230V, 50 Hz complete with fixing arrangement and connection complete all as specified and directed.

M & L sheet metal enclosure for DBs 8 way double door type with 200amps rated busbar SPN including necessary connection complete all as specified and directed.

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, complete all as specified and directed.

S&F MCB single pole & neutral 40 to 63 Amps 230 Volts'C' series, 10 KA complete all as specified and directed.

S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminium stranded conductor served with PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension ire one twin core flat cable of circular of size 16 sqmm complete all as specified and directed.

M&L earthing complete with galvanised earthy plate electrode 600 x 600 x 6 mm thick buried directly in ground ( earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 meter below normal ground level, the earth plate surrounded by a mixture of charcoal dust and salt to a packed thickness of 150 mm on all sides with and including necessary excavation earth work returning, filling in and removal of surplus soil upto 50 mtr including GI wire 4 mm dia bolted and riveted to earth plate at one end in and connected to continuous GI earth wire encased in and including 15 mm GI light grade pipe with all fittings from top edge of earth plate complete as specified and as shown in electrical plate No 3 complete all as specified and directed.

S&F GI water tubing 25mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed complete all as specified and directed.

S&F gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 25mm complete all as specified and directed.

M & L for mild steel cross arm for bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paint after preparation of surface, including taking down unserviceable/old cross arms, complete all as specified and directed.

M&L in replacement of ACSR conductor of any size and any type (as required on site) including stretching, fixing and binding to insulator on OH LT line service feeders all as specified including aluminium binding wire or aluminium tapes complete all as specified and directed.

M & L for pin type, porcelain, vitreous, white or brown insulator including one galvanised mild steel spindle, one galvanised iron washers and one galvanised iron nut, 100 mm height, 65mm dia for 1100 (LT) volts grade. Including taking down old unserviceable pin insulator complete all as specified and directed.

M&L in replacement of Shackle type, porcelain, vitreous, white, brown or green insulators for working pressure 1100 volts grade, 90 mm dia 75 mm height including galvanized mild steel straps of 31 x 3 mm size, 12 mm dia insulator bolts, washers and nuts complete all as specified.

Taking down the existing unserviceable distribution panel board with conventional type switches, unserviceable MCCBs from Panel boards, controls and removing from site for further disposal complete all as specified and directed.

Supply, assembly, erection, testing and commissioning of Electrical panel cubical outdoor type powder coated with 8 / 7 tank process suitable for operation on 3-phase + N + E, 415V, 50 Hz, AC with internal arc containment, internally pre-wired with copper conductor factory fabricated as per CPRI approved make specified in CA, floor mounted free standing made out of 3.15mm thick CRCA sheet, and shall be compartmentalised with rubber gasketed hinged door having front and rear opening for installation of separate cable alleys, bus bar chamber and switch gear compartments, dust and vermin proof duly powder coated with aluminium bus bars 1000A capacity for phases and neutral, set of three LED indicating lamps with base, air ventilation to be provided for heat dissipation, suitable sized knock out holes for cable glands shall be provided, with and including provision of the following switch gears, including suitable size of necessary PCC (1 : 3 : 6) type C2 as in foundation complete all as specified and directed.

a) Aluminium Bus bar 1000 Amps capacity TPN, full for phase and neutral with colour code PVC sleeves. - 01 Job

b) LED RYB indicating lamps – 01 set

c) LED Ammeter and voltmeter with necessary CTs and display of required rating .

d) MCCB 630Amp, 50KA TPN, 415 Volts - 1 Nos (Incomer)

e) MCCB 125Amp, 18KA TPN, 415 Volts - 07 Nos (Out going)

f) Panel wiring with PVC Insulated un sheathed single core, 1100 Volts grade cable with copper conductor, multi stranded of suitable size. - 01 Job

g) Interconnection of busbar with MCCB, , contactor with suitable size aluminium strip - 01 Job

h) Provisioning of cable glands and cable lugs for all incoming and out going cables & connecting the earthing to an earthing test point to main switch board as specified and testing on completion complete all as specified & directed by Engr-in-Charge. - 1 Job

All as per ser item No 120 here in before but depth exceeding 1.5 m and not exceeding 3 m.

M & L for sand cushioning to underground cables 8 cm below the cable before laying and 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, complete all as specified and as directed.

Material and labour for kiln burnt Sub class 'B' bricks laid dry , flat , width wise along the length of cable in trenches after sand cushioning for protection of under ground cable complete all as specified and directed.

Material and labour for Cement concrete in bed of poles streets and stays 1:4:8 type D-2 using 40 mm graded crushed stone aggregate complete all as specified and directed.

Material and labour for Cement concrete 1:2:4 type C-2 using 40 mm graded crushed stone aggregate as in pole coping and stay assembly complete all as specified and directed.

Material and labour for Cement concrete in foundation of poles streets and stays 1:3:6 type D-2 using 40 mm graded crushed stone aggregate complete all as specified and directed.

Supplying, erecting and fixing steel tubular swaged poles with cast iron base plate of size 300mm x 300mm x 6mm, finial taper plug, bolts, nuts & screws for type 410 SP-31 (9.0 metres long) including painting with two coats of aluminium paint over one coat of red oxide primer on all exposed surfaces and tarring with black bituminous paints to embedded portion in PCC and providing 3 Nos of 30cm wide circular bands with black & yellow paint starting from plinth level at a gap of 30 cm in between 2 bands and numbering of poles, in yellow paint over black painted back ground at a height of 2m from bottom of pole with 5 cm large bold letters 2" (inch) wide including taking down old one complete all as specified and directed. Note: Excavation, earth work, PCC in foundation and coping shall be measured and paid separately under relevant item of this schedule.

Supply and fix street light control junction box 200x160x98mm made out of thermoplastic and arrangement of incoming 3 phase 4 wire system and out going 3 phase 4 wire system with R.Y.B.& N studs and control for incoming & outgoing cables with MCB SP 6 Amps 230 volts with neutral link including flat iron 25x3 mm “D” clamps (2 Nos) suitable to pole of any size with bolts nuts & washers including taking down old one complete all as specified and directed. NOTE: - The unit rate quoted shall be deemed to includes for incoming & outgoing cables glands & lugs of size up to 25/16/10 sq mm 4 core

S & F bracket suitable for street light fitting made out of 40mm dia GI tubing light grade 1.5m long bent to shape, fixed with necessary nuts bolts and clamps of size 32X6mm including taking down old one complete all as specified and directed.

Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including Connection cable as required including taking down old one complete all as specified and directed .

Supply and fixing 40mm dia light grade GI galvanised with fittings, laid in trenches/wall/pole for protection of underground cable to Junction Box complete all as specified and directed.

Supply and fixing 20mm dia light grade GI tubes galvanised with fittings, laid in trenches/wall/pole for protection of underground cable to Junction Box including taking down old one complete all as specified and directed.

Supply & Fixing Multi stranded Copper Conductor cable of 3 Core 1.5 Sq mm for connection of junction box to light complete all as specified and directed.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathed of PVC tape overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable of size 16 Sqmm including dismantling the existing unserviceable complete all as specified and directed.

Taking up the unserviceable XLPE LT UG cable 3.5/ 4 core 16 Sqmm to 95 Sqmm from trenches or walls complete all as specified and as directed.

Taking up the unserviceable XLPE LT UG cable 3.5/ 4 core 120 Sqmm to 240 Sqmm in trenches or walls complete all as specified and as directed.

S & F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, 3.5 core 120 sqmm cross sectional area in trenches or walls complete all as specified and as directed. Note: for SI Nos 134 to 140 : Excavation & Earth work sand cushioning GI Pipe and brick for cable protection will be measured and paid separately.

All as per item No. 137 above 3.5 core 95 Sqmm

All as per item No. 137 above 3.5 core 70 Sqmm

All as per item No. 137 above 3.5 core 50 Sqmm

All as per item No. 137 above 3.5 core 35 Sqmm

All as per item No. 137 above 3.5 core 25 Sqmm

All as per item No. 137 above 3.5/4 core 16 Sqmm

S&F Moulded Case Circuit Breakers (AC 415V) 4 pole 630 Amp 50 KA Conforming to IEC:60947-II / IS:13947-II) adjustable thermal and adjustable magnetic type including dismantling the unserviceable MCCB including taking down old one complete all as specified and as directed.

All as per item No. 144 above but 400 Amp capacity 50 KA.

S & F MCCB 4 pole 200A, 36 KA including dismantling the existing unserviceable MCCB complete all as specified and directed.

All as per item No. 146 above but 4 pole,125/100 Amp Capacity 25 KA including dismantling the existing unserviceable MCCB.

All as per item No.146 above but 4 pole 63-100 Amp Capacity 16 KA including dismantling the existing unserviceable MCCB complete all as specified and directed.

Supply and fix in LT Straight through joint heat shrinkable 1100 volts, 25 sqmm to 50 sqmm including dismantling the existing unserviceable complete all as directed by Engr-in-charge.

Supply and fix LT Straight through joint heat shrinkable 1100 Volts, 70 sqmm to 150 sqmm including dismantling the existing unserviceable joint complete all as specified and directed.

Supply and fix Straight through joint heat shrinkable1100 volts,150 sqmm to 185 sqmm including dismantling the existing unserviceable joint complete all as specified and directed.

M & L for rest retching of LT/HT ACSR conductor and GI wire of any size and on any type of poles carrying upto six conductors in a span including disconnecting from insulator and rewinding to insulator after stretching with and including aluminium wire including refixing /re-adjusting line spans, line separators, cross arm on poles complete all as specified and directed.

M & L for cutting/trimming/chopping of tree trenches along the overhead line upto 3m from electric line clearance on both side of HT/ LT lines and disposing off the cut tree / Branches site to a distance not exc. 50m and clearing the complete all as specified and directed.

M & L for painting to HT/LT poles, 11/9 mtr with cross arms, bracing and clamps with one coat of synthetic enamelled paint over one coat of red oxide primer including scrapping the old paint carefully to make smoothen complete and painting strips of red and black from foot of pole upto 5 feet each strip of 30 cm height complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron strip 25×4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0 mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion complete all as specified and directed.

M/S MUNEER AHMAD WANI CONSTRUCTIONS (BID ID -3323318)

M/S SAJAA CONSTRUCTION COMAPNY (BID ID -3329231)

Bidder Name

M/S SAJAA CONSTRUCTION COMAPNY

M/S AK CONSTRUCTION

M/S MUNEER AHMAD WANI CONSTRUCTIONS