REPAIR/MAINT B/R WORK IN ELECTRIC MES INSTALLATION, REPAIR TO CLEANING OF SEWAGE LINES, FENCING GATE BOUNDARY WALL AND CULVERT IN TECH, ESSENTIAL REPAIR TO WATER SUPPLY SERVICES AND REPAIR AND REPLACEMENT OF WATER SUPPLY MACHINARIES AND ALLIED E/M SE

Amount

Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles. Complete all as specified and directed.

M&L for Brick work with old size fly ash bricks straight or curved on plan exc 6m nean radius and setting in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster from brick walls/ stone walls etc. of any description including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) on brick wall or concrete surfaces, finished even and smooth without using extra cement Mechanical Means complete all as specified and directed (Note:- Qty Below 10 Sqm may be excuted throuth conventional mathod).

M&L for 15mm thcik rendering on other than fair faces of brick work in cement mortar (1:4) and finished even and smooth without using extra cement Mechanical Means all as specified and directed (Note:- Qty Below 10 Sqm may be excuted throuth conventional mathod).

M&L preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. Berger Durrcem extra, Asian Paints decora, Nerrlac or equivalent.

M&L for applying two coats of oil bound distemper over a coat of primer on walls including preparation of new plastered surface complete all as specified and directed. Asian Paints tractor synthatic distemper/Nerolac beauty smooth finish/Berger beauty clearner.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

M&L for PCC (1:2:4) type B-2 using 40mm graded stone aggregate) Nominal mix in pavement/ hardstanding, thickness of concrete shall not less than 150mm. Complete all as specified and directed.

M&L for 75mm thick cement concrete (1:4:8) using type D-2, 40mm graded stone aggregate) as in sub base for flooring complete all as specified and directed.

M&L for Duracrete Chequred tiles glossy finished 300mm x 300mm x 20mm thick, heavy duty tiles ; laid over and including 25 mm thick PCC (1:2:4) Type B1 using 20mm graded stone aggregate and 15 mm thick screed bed in cement mortar (1:6) set jointed and pointed in neat cement slurry with white/grey cement mixed with admixture or pigment to match the shade in floors, and cut and polished complete all as specified and directed. Kajaria/Orieut bell/Johnson.

Dismantling of floor hearth and wall tilling incl mortar beding removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for double charged Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with existing surface over & including 20mm thick sceed bed in CM (1:6) complete as specified and directed. Kajaria/Orieut bell/Johnson.

Ditto but on vertical surface, over & including 10mm thick rendering in CM (1:4) complete as directed.

M & L for glazed ceramic joint free coloured designer tiles of size 450x300x7mm / 600x300x7mm thick, in vertical surfaces , set and joiunted in neat cement slurry and pointed in coloured cement to match over and including 10mm thick screed bed in cement mortar (1:4) complete all as specified and directed. Kajaria/Orieut bell/Johnson.

M & L for coloured non-skid/anti skid ceramic jointless tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not Exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM (1:6) complete all as specified and directed. Kajaria/Orieut bell/Johnson.

Taking up or down steel tubing and connections, 15mm bore and removing from site complete all as specified and directed.

Taking up or down steel tubing and connections, 20mm bore and removing from site complete all as specified and directed.

Supply and fixing 20 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete all as specified and direction.

Supply and fixing 25 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete all as specified and direction.

Excavating in trenches, not exc 1.5m wide & not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10sq m on plan & getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers not. exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated soil not. exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Demolition & breaking up drain pipes (Salt glazed ware, AC/PVC or Reinforced concrete) set in CM Internal dia of pipe 150 mm complete all as specified and directed.

M&L for PCC (1:4:8) type D2 using 45 mm graded stone aggregarte beding to drain pipes of 150mm internal dia including packing under, & haunching against the sides of pipes after they are laid & tested, complete all as specified and directed.

M&L for 150mm dia (Internal) Slat-glazed stoneware drain pipes grade 'A' laid in trenches on concret bed at required slope and jointed complete all as specified and directed.

M&L for RCC class NP-2 pipe 150mm dia laid in trenches and jointed, complete all as specified and directed.

Cutting into existing manholes for connecting new drains pipes of 150mm dia making good to pipe & rendering, cutting out existing benching for & forming branch channel in cement concrete (1:2:4) type B-1, smooth finished,complete all as specified and directed.

M&L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in foundations, filling and mass-concrete complete all as specified and directed.

Supply only integral water proofing compound. ISI marked complete all as specified and directed.

M&L PCC (1:4:8) type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed.

Cleaning of manholes by Mechanical Means of any size depth not.exc 1.50m by taking out sludge and burrying the night soil in pits including excavation and earth work for pits complete all as specified.

Cleaning by Mechanical Means dewatering sludge water from septic tank/soak well through sewage suction truck/tanker of suitable capacity including removing all rubbish slushy water and disposed off out side MOD land at his own descnetion of contractor complete all as specified and directed. Note:- The size of sewge tanker/truck and depth of sludge in the each load and truck No shall be measured for arriving unit for payment purposes complete all as specified and directed.

Cleaning by Mechanical Means dewatering sludge water from SWTs tank of dia 8.00 mtr to 10.00 mtr and depth 3.00 mtr to 4.50 mtr through diesel pumping set system and crew necessary for excavation burrying the night soil, removing all rubbish slushy water and eashing through fresh water incuding applying two coat of white washing (inner and outer side) and applying one coat of synthetic enamel paint on grill portion complete all as specified and directed.

Cleaning of sewage line by Mechanical Means 100mm dia including manholes by taking out all sludge/night soil burried in a pit to out side to distance not less than 100m and covering top of pit with earth layer 25mm thickness all as specified and directed.

All as per item No-35 above but 150mm dia sewage pipe line complete all as specified and directed.

Removal of blockages from Indian type, European type WC, Nahani/floor/gully traps or between manholes complete by rodding and flushing with watering obtain smooth flow of sewage complete all as specified and directed.

Taking down/dismantling PVC pipes in any length of bore 75/110mm complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Ditto all as per item No-41 above but 75mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowls 75mm bore complete all as specified and directed.

S&F in repair 110mm PVC branch pipe singl (equal or un equal) ISI marked and oval access door complete all as specified and directed.

S&F in repair 110mm PVC SWR) bends ISI marked complete all as specified and directed.

S&F Stack clamps purpose made with flat iron and MS round iron stays, including bolts and nuts and securing ends of stays to wall or roof to fix 75/100mm bore CI pipes complete all as specified and directed.

Dismantling of posts or structs (wood, steel or RCC) any section, including taking out embeded portion in concrete, brick work, masonary etc and making good to distrurbed area complete all as specified and directed.

Excavation in post holes each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25 cm, watering and removing surplus roil to a distance not exc 50 m and making good surfaces soft/loose soil. complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any standards, rails, staining bolts, etc. including provision of binding wire etc. Complete all as specified and directed.

Supply only chain link MS galvanised fencing any type and size complete all as specified and directed.

S&F in repair galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. complete all as specified and directed (each line wire to be measured for payment purpose).

S&F in repair concertena coil as in fencing of 60 nos spirals shall be strached upto 8 mtrs dia of coil become 600 mm after straching the coil shall be hot drip galvanised with 0.50 mm thickness strip and 2.5 mm dia galvanised steel wire etc. Complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. Complete all as specified and directed.

M&L for Framed work as in doors or gates of angle of othger section with gusset plates ,rails braces etc complete drilled for fixing of steel sheeting or other covering Doors etc to be prepared for hanging or sliding with or including either hooks and hinges or steel hanging door fitings (exclusive of steel sheeting or other covering,running rails and guides) and hanging also fastening and fixing complete all as specified and directed.

M&L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Asian paints gattu/ Nerolac Higlass finish/ Berger Butterfly.

M&L for preparing new by plastered surfaces of walls by affixing wall care putty rubbins to smooth finish and applying two coat of 100% premium acrylic emulsion Comouflaging pettern having VOC less than 50gm/Ltr and UV resitance as per IS 15489-2004 alkali and fungal resistance, dirt resitance exterior paint of required shade (company depot tinted) with silicon additives @1.43 ltrs/ 10 Sqm over and including priming coat of exterior primer applied @0.9 ltr/10sqm over new by prepare surface and height upto 9 meter complete all as specified and as directed. Note: Primer and Emulsion to be carried out through air less spray machine (Mechanical Means) Make:- Asian Paint Apex ultima/Berger weather coat long life 10/Nerolac Excel everlast 12.

M&L for pre cast RCC (1:2:4) type B-1 using, 20mm graded stone aggregate as in slab supported on wall, beams and columns in floors, inculding all necessary form works all as specified and directed.

M&L for mild TMT steel bars 10 mm dia and over for reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, and binding with and incl MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-415 or Fe-500 complete all as specified and directed.

M&L for PCC (1:3:6) type C1 using 20 mm graded stone aggregate) as in drain etc complete all as specified and directed.

M&L extra fair finished to concrete surface on drain or channel 30cm and over inner gorth in cement concrete using incl forms, moulds, mittred/ stopped ends etc. complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying three coats of white wash complete all as specified and directed.

Finishing the concrete surfaces of road using broom finish complete all as specified and directed.

M&L forming expansion joints 12mm thick filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound grade Aforthickness of concrete slab as 150mm thick. Complete all as specified and directed.

M&L for forming construction joint 30 mm deep and 10 mm wide filled with sealing compound grade 'A'. Complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection finished even & smooth without using of extra cement. Complete all as specified and directed.

M&L for GI tubing 15 mm dia bore medium grade complete with all fitting laid in trench or fix on wall/floor including taking up or down old u/s steel tubing and connection complete all as directed. Make : Jindal/Parkash/Tata or equivalant.

Ditto as per item No 65 buy for 20 mm dia pipe

Ditto as per item No 65 buy for 25 mm dia pipe

Ditto as per item No 65 buy for 50 mm dia pipe

Ditto as per item No 65 buy for 80 mm dia pipe

Supply and fix Cast Iron Air Valves with two air Outlets, conforming to IS 14845 of size 80 mm dia bore and fixing up in CI/DI Water supply mains including fittings complete all as specified and directed.

Supply & Laying Ductile iron pipes single socket including special class "K-7 with spigot and socket ends centrifugally in any length laid in trenches/open surface for 150 mm dia bore sizes including taking down old us GI/CI/DI pipe complete all as specified and directed: Make :- Electrosteel/Jindal/TATA.

Taking up or down existing GI steel water tubing of any grade including all fittings and accessories from trenches/open surfaces, including cleaning ,re-threading the old threads, cutting, welding work, etc as required and re-fixing the same after necessary repair works, etc as required , including new GI fittings and accessories as required in new or old position complete all as specified and directed of the following size :- Note: Necessary earth work shall be measured and paid seperately under respective items of Sch 'A' 80mm bore (Nominal bore

50/40mm bore (Nominal bore)

25mm bore (Nominal bore)

20mm bore (Nominal bore)

Taking up or down existing GI/CI/DI water tubing of size 100/150 mm dia bore of any grade including all fittings and accessories from trenches/open surfaces, including cleaning , cutting, welding work, jointing with new material (if required) etc as required and re-fixing the same after necessary repair works, etc as required in new or old position including necessary earth work complete all as specified and directed. Note: Any new fitting required shall deemed to be included in quoted rate of this items.

M&L for cutting of road ( in hard/dense soil) for laying of CI/DI/GI Pipe line of any size upto 1.2 mtr depth and getting out including forming bottom surface to required level or slope & making good the road as per existing all as specified and directed by EIC.

Supply and fixing gun metal globe or gate valve with iron wheel head screwed both end for GI pipe and fixed in 15 mm dia pipe.

Ditto all as per item No 78 but 20 mm dia pipe.

Ditto all as per item No 78 but 25 mm dia pipe.

Ditto all as per item No 78 but 50 mm dia pipe.

Supply, installation, fixing, jointing and testing, ISI Marked, cast iron sluice valve of class PN-1.6 conforming to IS-14846 of 2000 both ends flanged with iron wheel head and stainless steel spindle, long body type, jointed on both ends with and including rubber gasket joints, nut, bolts & washers and taking down old us and tested of following size. (Make: Zoloto/Kartar/Bir 150 mm bore.

Ditto all as per item No 82 above but 100 mm bore.

Ditto all as per item No 82 above but 80 mm bore.

M & L for painting of valve pit / chamber cover made of MS sheet cover complete all as directed and specified and directed.

M&L for cleaning of RCC over head tanks (installed on stagging) comprising of the following operations :- (a) Dewatering of the tank shall be carried with gravitational flow. (b) Removal of left over dirty water and sludge with suitable sludge removal pump. (c) Cleaning of internal walls, floor, ceiling of tank shall be carried outand ensure that no dirt, algae or mass remain on surface of tank. (d) Remaining sludge shall be removed from the floor completely. (e) Tank shall be sterilized by spraying anti bacterial agent . (f) Date of cleaning and capacity of tank will be written on OHT with synthetic enamal paint. Cleaning will be done for following capacity RCC overhead tanks:- For 50,000 gallon Overhead tank

For 22,000 gallon Overhead tank

For 10,000 gallon Overhead tank

For 5,000 gallon Overhead tank

M&L for scraping old paint on CI/DI/GI pipe and sluice valve/NRV including removing all fly/honey bee/insects etc (if required) fitted to pump house, OH reservours having staging upto 16 m for supply, distribution, washout, rising, washout etc with two coats of synthetic enemel paint over a coat of red oxide primer as per color code provided by department, including marking arrow as directed in white color all as specified and directed. Painting shall be done for following CI/DI/GI pipe and sluice valve/NRV:

Ditto all as per item No 90 but for 80/100 mm dia pipe.

Ditto all as per item No 90 but for 150 mm dia.

Ditto all as per item No 90 but for 80/100 mm dia valve.

S&F adjustable telescopic sprinkler 4 nozzle spray head suitable for garden watering with female thread size 20/25 mm complete with all fittings and accessories required for connection complete all as specified and directed.

M&L for Construction of brick masonary valve chamber (in repair) with 3.00 mm thick MS sheet covered on angle iron frame of size 40mm x 40mm x6 mm duly painted with two coat of black bituminous paint over coat of red oxide primer with and including all necessary earth work, excavation in soft/loose soil, returning filling in and removed of surplus soil to a distance not exc. 50 mtr, PCC (1:3:6) type C work 15 mm thick in foundation projected 10 cms on all sides of external wall, brick work wall 23 cm thick with brunt sub class B bricks in cm (1:4), 15 mm thick plastering in CM (1:4) on internal wall surface and exposed external water surface etc with necessary locking arrangement with 50 mm size one No. Lock complete of internal size 1200mm x1200mm x1200mm complete all as specified and directed.

Supply & Fixing &testing DI/CI Fittings any size, such as bends(any type, radius & angle) tappers any type (Straight, bend, increasing, decreasing or double socket or both end flanged etc) Tee pieces, D Joints single branch 'Y' junction double branch, cross (all socket or spigot & socket or both end flanged), collars, caps, connecting piece and plugs complete all as specified and directed.

M & L for dismantling of centrifugal pumpset of capacity 10 HP from its existing site/base, transportaion (if required) and carrying out following repairs to pump and motor,reassembling after replacement of following items & jobs and refixing the same at its existing site/base and testing to entire satisfaction of EIC.

Labour only for Cutting and taking out burnt winding of motor of 10 HP capacity and M&L for rewinding with same size of copper wire as per existing quantity including varnishing backing and making connection complete all as specified and directed.

Supply only for replacement against item No 1.00 here in before Bearing front/rear.

Supply only for replacement against item No 1.00 here in before Cover sleeve.

Pump reparing and overhauling against item no 1 above.

Supply only for replacement against item No 1.00 here in before Gland and packing of 10 HP pump set complete.

S&F Vacuum Hose pipe 40-50mm dia made of PVC heavy duty, floating green ribbed colour complete all as specified.

S&F deep leaf net along with 4.8 mtr telescopic pole for swimming pool and 18" wall cleaning brush nylone/standard curved compelete all as specified and directed.

Supply only Alum superior quality white colours complete all as specified and directed.

Supply only copper sulphate superior quality all as specified and directed.

Supply only H2SO4 acid in sealed container for cleaning of swimming pool basement.

Supply only TCC-90 complete all as approved & directed by Engineer-in- Charge

M & L for replacement of sluice valve of dia 150 mm bore (ISI marked) PN 1.6 with new for distribution, rising main, wash out purpose to fix in pipe line complete with nut bolts, washers and rubber packing etc all as specified and directed. Make- Kartar, Zoloto, BIR

Ditto same as above but 100 mm bore

Ditto same as above but 80 mm bore

S&F MS pipe 150 mm dia complete with fittings all as specified and directed.

S&F MS pipe 100 mm dia complete with fittings etc all as specified and directed.

S&F MS pipe 80 mm dia complete with fittings etc all as specified and directed.

M&L for removing of existing multigraid pressure filter plant , horizontal type of capacity 10000 Glns/hour. Unloading the filter media from the pressure filter ie. gravells (different sizes) without damaging the existing system and taking out the damaged strainer nozzle (push/Thread) type from bed plate . Replace the damaged bottom plate/shell of pressure filter with new as directed. Replace all the strainer nozzle (push/Thread) with new. Cleaning the inside chamber and then fresh charging of new graded gravells in the existing filter plant and closing the top manholes with new gasket seal after replacing of filter media and strainer complete, Repalcing of all existing pressure gauge with new , painting of all inside and outeside of filterplant including painting of pipelines connected duly marking for incomming and outgoing complete all as specified and directed by Engineer- in- Charge including following operations: 1. New graded gravels to be fill will be size of 1" x 3/4" (25-20mm), 3/4" x 1/2" (18-12mm), 1/2" x 1/4" (10-06mm) as directed and required at site. 2. Inside painting will be done with lead free black bituminous paint suitable for pressure filter inside. and outside painting will be done with two coats of synthetic enamel paint. 3. Any minor parts required to make plant serviceable even if notified by the Engr- in-Charge shall be supplied by the firm without any extra cost to the department.

S&F Robotic type pool cleaner suitable for cleaning of swiming pool floor,walls etc and comprising of following specification complete all as specified and directed: Input voltage : 220V AC- 230 V AC, Frequency: 50Hz, Output Voltage: DC 24 V, Input Power :200 W, Output Power: 150 W, cable length: 30 m minimum, Roller width: 358 mm, Maximum cleaning area: 600 sqm, speed: 12.5 m/min, filter bag porosity: 50 Micron. Make: Blue Aid, Navkaar pools,potent water care pvt ltd. or equivalent.

M&L for FRP filter with trolly, motor, starter, wire, hose pipe, pressure gauges and other conncting accessories following specification complete all as specified and directed: FRP filter should be top monted filter with SS trolley and with 6 way multiport valve, Motor capcity: 0.75 HP with starter and wire, working pressure id 2.5 Kg sqcm/ 36 psi, operating temerature 43 degree C, Size 650 (Dia), Circulation capacity minimum 17000 Liter/Hours.

M&L for complete cleaning of Drilling ditch of size 27 m x 10.5 m with depth 2.5 feet to 12 feet comprising of the following operations :- (a) Dewatering of the pool. (b) Removal of left over dirty water and sludge with suitable sludge removal pump. (c) Cleaning of internal walls, floor, ceiling of pool shall be carried out with cleaning agent and ensure that no dirt, algae or mass remain on surface of pool. (d) Remaining sludge shall be removed from the floor completely. (e) All T&P and cleaning agent required shall be arranged by the contractor.

Supply only chlorine and PH testing kit set with testing solution complete all as specified and directed.

M&L for Construction of brick masonary valve chamber (in repair) with 3.00 mm thick MS sheet covered on angle iron frame of size 40mm x 40mm x6 mm duly painted with two coat of black bituminous paint over coat of red oxide primer with and including all necessary earth work, excavation in soft/loose soil, returning filling in and removed of surplus soil to a distance not exc. 50 mtr, PCC work 15 mm thick in 1:3:6 in foundation projected 10 cms on all sides of external wall, brick work wall 23 cm thick with brunt sub class B bricks in cm 1:4, 15 mm thick plastering in cm 1:4 on internal wall surface and exposed external water surface etc with necessary locking arrangement with 50 mm size one No. Lock complete of internal size 1200mm x1200mm x1200mm complete all as specified and directed.

M&L for pressure washing and cleaning thoroughly the bottom and inside walls of balancing tank of the drilling ditch by suitable mechanical means using bleaching powder including removing of sludge/ slurry/ foreign matters if any from the tank to a distance not exceeding 50m including one coat of white wash to all internal wall and floor surfaces of tank complete to the satisfaction of the Engineer-in-charge all as specified and directed.

S&F Decorative Bollards LED Luminaries 12 watt made of aluminium/MS pipe, Input voltage 100 to 270 volts, 50 HZ, poly carbonate diffuser for uniform lighting and coated with polyurethane paint in the desired shade complete all as specified and directed. Phillips/ Jaguar.

S&F sub main wiring with two single core FRLSH PVC insulated and sheathed 1100 Volts grade, 2.5 Sqmm size cables, PVC insulated stranded copper conductor fixed in PVC conduite pipe 25mm dia with all accessories and one continuous run of 1.5 Sqmm copper conductor PVC ((including chase cutting in brick/ground/earth/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) (Note :- Two single core cables along with earth wire and conduit shall be measured as one unit length).

S & F sheet metal enclosure for DB’s (Single door type) when MCB’s to be used, single pole and neutral, 2 ways 240 volts fixed sunk / flush to the wall or niche including blanking plate complete all as specified and directed.

Taking down caefully switch board complete along with old MS rectangular sunk type box heavy/medium duty of size 1 to 12 module from the existing position along with switches sockets regulators etc by unscrewing from board by disconnecting electric connections without damaging existing circuit and conduit complete and reconnecting all connection after comletion of job with making good the disturbed surface to match the existing one all as specified and directed.

M&L for modular metal flush boxes and white cover plate with frame of size 6/8 module for mounting modular type switches /socket/fan/ regulator etc. Make- Goldmedal/Crabtree(Havells)/L&T.

M&L for modular metal flush boxes and white cover plate with frame of size 3 module for mounting modular type switches /socket/fan/ regulator etc .Make- Goldmedal/Cabtree(Havells)/L&T.

S&F switch modular type 1 module single pole, one way 10 Amps. Make- Goldmedal/Cabtree(Havells)/L&T.

S&F switch modular type 1 module single pole, one way 15 Amps. Make- Goldmedal/Cabtree(Havells)/L&T.

S&F socket outlet 2 in 1, 5 pin, 15 Amps modular type 2 module .Make- Goldmedal/Cabtree(Havells)/L&T.

S&F socket outlet 5 Amps modular type 2 module. Make-Goldmedal/Cabtree(Havells)/L&T.

M&L ceiling rose,PVC/polycarbonate, isolated body

S&F stepped type electronic fan regulator modular type 2 module Make-Goldmedal/Cabtree(Havells)/L&T.

Taking down copper/aluminium point wiring for (light, fan, socket or power) complete including unserviceable fittings such as switches, ceiling rose, holders, sockets,light fittings etc. and making good the disturbed surfaces on wall/floor etc complete all as specified and directed. Note- (i) Dismantled serviceable light fitting shoud be kept in safe custody for reuse. (ii) Refixing of serviceable fitting shall be done without any extra cost.

Taking down fans/Exhaust fan from existing position and removing the same and and will installed after repair completion of work.

Taking down old and unservicable sheet metal enclousure ,switch fuse unit,distribution board any type/way/capacity including fuses mcbs ,insulator rccbs etc copmlete after removing all connection and amking good the disturbed surface all as directed.

M & L for point wiring with two single core PVC insulated & PVC unsheathed FRLS-H multistranded copper conductor cable of size 1.5 sqmm 1100 volt grade in non metallic rigid PVC concelled conduit medium grade 20/25 mm dia with all accessories mounting all the surface of wall/ceiling/roof/etc with suitable size of module metal flush boxes and including modular front cover plate & back plate for mounting modular type switches /socket/fan/ regulator etc including provision of one single core PVC insulated and unsheathed multi stranded copper cable of size 1.5 sqmm 1100 volt grade as earth continuty conductor connected to common earth dolly switch board complete for following- Make of cable- Polycab/Havells/RR kables/plaza Make of conduit- AKG/Jindal/Tata/Havells Note:- One light/fan point controlled by one switch SP 5 Amps ,240 V.

One 3 pin 5 amps switch socket outlet point on independent board

One 3 pin 5 amps socket point on same board

Ditto all as per the item no herein before but with 2.5 sqmm conductor for 5 pin 15 Amps switch socket outlet.

S&F Submain wiring with two single core PVC insulated FRLS-H multistrand copper conductor cable of size 04 Sq mm drawn into and including non metallic medium duty rigid concealed PVC condute not less than 25 mm size ISI marked with all fittings / accessories and 04 Sq mm FRLS-H multistrand copper conductor cable as continuous earth wire complete. Make- Polycab/Havells/RR kables/plaza (Note :- for submain wiring: Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the unit rate quoted for this items).

S&F Sheet metal enclosure 8 way double door distribution board when MCB to be used SPN 240 volt sheet complete all as specified and directed.Make- Indoasian/Legrand/L&T/Havells.

S&F MCB SPN 32 to 40 Amps 240 volt,50 hz,10 KA breaking capacity :C" curved type complete all as specified and directed. Make- Indoasian/Legrand/L&T/Havells.

S&F MCB single pole, 6 to 32 Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as directed.Make :- Make- Indoasian/Legrand/L&T/Havells.

Supply and fix angle holder backlite with 1x9 watt LED bulb includig all fixing accessories and making connection with copper conductor all a s specified and directed.

Supply and fix LED light fittings 1x18/20 watt ,220 voltAC decorative box type with driver holder including 18 watt LED tube light connecting up with 3 core flexible cable copper conductor of suitable size from ceiling rse complete.Make :- Philips/Jaguar/L&T.

M&L for painting of ceiling fan, exhaust fan,with synthetic enamelled paint by spray painting machine including filling cavities with filler one coat after cleaning all dust etc including writing of MES No complete all as specified and directed.

M&L for rewinding of ceiling fan of size 1200 mm sweep with super enamelled copper winding wire of existing gauge, reassembling the same complete including taking down cleaning and replacement of split pin rubber reel, clamp, check nuts, flexible cord of size 3 core of suitable size including leathe work of shaft complete and refixing the same after repair complete all as specified and directed.

M&L for rewinding of exhaust fan of size upto 300/350 mm sweep with super enamelled copper winding wire of appropriate gauge for any make or model,reassembling and testing including taking down cleaning and replacement of split pin rubber reel, clamp, check nuts, flexible cord of size 3 core of suitable size complete and refixing the same after repair complete all as specified and directed.

M&L for rewinding of exhaust fan of size upto 450 mm sweep with super enamelled copper winding wire of appropriate gauge for any make or model,reassembling and testing including taking down cleaning and replacement of split pin rubber reel, clamp, check nuts, flexible cord of size 3 core of suitable size complete and refixing the same after repair complete all as specified and directed.

S&F in repair of ball bearing No 6201/6202 for ceiling fan/exhaust fan complete all as specified and directed. Make- SKF/NBC/Tata.

S&F in repair Gun metal bush for ceiling fan/Pedestal an/Air circulator/wall fan etc including dismantling complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 600 mm x 600 mmx 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 M beyond outer edge of earth pit) PCC pit in mix (1:3:6) type C1 with RCC (1:2:4) type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work, complete all as specified and directed.

VISHAL TRADERS (BID ID -3274336)