Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.5 LAccepted-AOC VPO KANWALI DISTT REWARI 123411 | KANWALI | REWARI | HARYANA | 123411 | ₹9.5 L | L1 | Accepted-AOC Accept |
| 2 | L2₹10.4 L+₹83,034 (8.70%)Rejected-AOC | ₹10.4 L+₹83,034 (8.70%) | L2 | Rejected-AOC Reject |
Tender Value
₹8.4 L
EMD Value
₹16,780
Closing Date
8 Aug 2020, 2:00 pmClosed
Executive Engineer, M/Garh Canal W/S Division, NNL
Executive Engineer, M/Garh Canal W/S Division, Narnaul
Renovation of Revenue office/record room/Lab and other misc. development works in Canal Colony campus Narnaul.
2020_HRY_137546_6
No. 3132-50/6A dated 20/07/2020
Open Tender
Civil Works
Item-rate/Agreement basic
60 days
Executive Engineer, M/Garh Canal W/S Division, NNL
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,000
Executive Engineer, M/Garh Canal W/S Division, NNL
₹16,780
Yes
24 Sept 2020
27 Jul 2020
10 Aug 2020
27 Jul 2020
8 Aug 2020
27 Jul 2020
Amount
Dismantling of white or glazed tile (HSR Item 8.38)
Dismantling of brick masonary (HSR -8.5b)
Providing & Fixing aluminium work for door, window, ventilator & partitions with extruded built standard tubular section/appropriate Z-section and other section approved make including P&F hinges/pivots and making provisions for fixing of fitting wherever required including the cost of PVC/neoprene gasket required including aluminium fitting. (HSR No. 17.96)
Providing & Fixing glazing in aluminium door, window, ventilators, shutter & partitions etc with PVC/neoprene gasket etc complete (Cost of aluminium snap beading shall be paid in basic item) with float glass panes of 5.00mm thick(HSR No. 17.98 (b))
Providing and fixing 12mm thick Prelaminated particle board flat pressed 3 layer or graded wood particle board confirming to IS :12823 grade I type II in panneling fixed in aluminium doors, window shutter and partition frame with CP brass/ stainless steel screw etc complete. ( HSR 17.97 b)
First class brick work lain in cement sand mortar 1 :6 in first storey upto 4 mtr above plinth level ( HSR 11.7)
Earth work in excavation in foundation trenched etc. in all kinds of soil, not exceeding 2 meters depth including dressing of bottom and sides of teaches, and subsequent filling around masonry in 15 cm layers with compaction, including disposal of all surplus soil as directed within a lead of 30 mtrs. ( HSR 6.6)
Cement concrete 1 : 4 :8 with stone aggregate 40 mm nominal size in foundation and plinth ( HSR 10.39)+ Note (V) e (i)
Damp proof course 75 mm thick of cement concrete 1:2 :4 using stone aggregate 20mm nominal size with 2 coats of bitumen 20/30 preparation at 1.65 Kg. per sqm laid hot and sanded (HSR. No. 10.113)
P&F vitrified tiles of size 600x600 mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and joined with white cement slurry, Note:- Tiles shall be of premium quality (1st Class) of reputed manufacture like NITCO, KAJARIA, SOMANI, ORIENT & JOHANSONS (HSR No. 14.89)
P&F vitrified tiles of size 600x600mm of approved make in skirting/dado laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tiles shall be of premium quality (1st Class) of reputed manufacture like NITCO, KAJARIA, SOMANI, ORIENT & JOHANSONS (HSR No. 14.90)
Plastering on wall 12mm thick cement plaster 1:6 (HSR No. 15.7)
12mm thick cement plaster 1:4 (HSR No. 15.5)
Cement concrete 1 :2 : 4 gola 10 cm x 10 cm quadrant along junction of roof with parapet wall finished smooth where specially specified (HSR 13.64)
Providing & fixing PVC Rain water pipe 6 Kg. pressure of ISI mark in cement mortar during masonry work (a) 100 mm dia PVC pipe 6 kg pressure (HSR 13.89 a)
Providing & fixing PVC bend ISI mark, 100 mm dia PVC bend (HSR 13.90) (a)
Scraping of cement plaster (HSR 8.32c)
Scraping white wash and colour wash ( HSR 8.32 a)
Applying priming Coat with cement primer in all shade on newly plastered or concrete exterior surfaces.(HSR 16.25)
Preparation of plasterd surface by applying two coat white cement based putty. HSR 16.81
Finishing walls with apex paint 2 coats first quality (HSR No. 16.79)
Distempering with washable oil bound distemper of approved manufacture 2 coat excluding priming coat on new work. (HSR 16.57)
Providing SALT GLAZED STONE WARE PIPES GRADES 'A' IN STANDARD LENGTH OF 600MM EACH PIPE MARKED WITH IS: 651 and their lowering, cutting, jointing & testing including the cost of jointing material as well as carriage loading unloading stacking , handling, re-handling etc complete in all respect to the satisfaction of Engineer in Charge. 200mm i/d pipe (HSR item No. 29.95-iii)
P&F in position best Indian make bevelled edges 505mm thick mirrorasbestos ground fixed position by means of 4 No. chromium plated brass screws and washers complete in all respects including cutting and making good the wells etc. (HSR 30.71 (a)(i))) 600mm X 450mm
P&F HDPE water storage tank of capacity 1000 liter (HSR Item No. 30.119)
P & F Ceramic tile/Anti skid tiles of size 400mmx400mm or above size of approved make in flooring, laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tile.(HSR No. 14.91)
Providing & Fixing first quality ceramic/glazed wall tiles confirming to IS 15622 of approved make in all colours of any size as approved by Engineer- In-Charge in skirting/dados over bed of 12mm thick cement coarse sand mortar 1:3 and jointed with grey cement slurry including pointing in white cement mixed with pigment to match the shade of tiles (HSR No. 14.92 (b))
P&F in position best Indian make ordinary lavatory suites consisting of lavatory in viterous chinaware size as gives below ( to the approval of the Engineer-in-charge all PVC) essary fitting R.S or C.I brackets for building into wall including painting 32 mm CP brass waste with CP brass chain & rubber plug 15mm CP brass screw down pillar tap with jam nuts or coupling best design. All fitting Indian make & to the approval of Engineer-in-charge All brass work chromium plated & complete in all respects i/c cutting & making good the walls & floors and painting for fitting etc.32mm CP brass waste with CP brass chain & rubber plug, white 510x400mm (iii) 510x400mm white one No. Tap (HSR 30.41)
P&F in position best Indian make chromium plated brass 2nd tap for lavatory suite (HSR 30.45 )
P&F in position 32mm dia G.I waste pipe embedded in wall or lead waste pipe (weighting 3.47kg /meter 2.8 mm thick) upto floor level i/c cost of wipped solder joint etc. complete (HSR 30.48)
P&F in position 15mm i/d C.P brass bib cocks of best quality (HSR 30.75) (i)Bib Cock
P&F in position best Indian make a range of two urinal flat back or angular lipped front in vitreous china-ware with 5ltr.capacity best Indian make C.I automatic flushing cistern with fitting & flush pipe complete as fully described item.30.19 (HSR 30.20) 465mm high (i) white.
Extra over & above item No.30.19 to 30.22 above for P& F chromium plated brass "p" of "s" trap with waste pipe or pipe or 32mm dia. complete (HSR 30.24)
Wrought iron and mild steel (using angles, flats, square bars, teed and channels) ladders, grills, grating frames, window gaurds, iron doors, openable or fixed staircase or parapet or any other type of railing gates and tree guards etc. including cost of screws and welding rods or bolts and nuts complete fixed in position (HSR No. 18.12)
Supply & Fixing Trapezoidal/Corrugated sheeting system in galvalume in colour coating steel of 0.8mm thickness complete in all respect.
P&F in position UPVC (SWR) pipe Grade-B for soil waste vent of anti syponage pipe of approved make i/c suitable jointing to enssue leak proof service as per instructions for laying jointing laid by the manufacture & i/cutting & wastage etc.& cutting holes in walls,roofs & floors etc & making to its original conditions but excluding cost of C.C 1:2:4 around pipelines complete in all respects. (A) 100 mm
Screed of 50mm thick cement concrete 1 :8 :16 to be laid below the topping (14.4)
Supply and erection of PVC copper conducted cable single core 1100 volt grade in pipe of suitable size excluding cost & erection of pipe (cable size 1.5 sqm) . (HSR No. 31.40 (i))
Providing ,laying, jointing, fixing & testing G.I pipe (Class -B) lines i/c cost of the special i.e. tees, bends, socket, elbow etc inside/outside buildings & testing etc. complete i/c cutting, threading as per (N.S item) (i) 25mm
Cutting chase in brick walls in cement or in floor for embedding G.I of H.C.I pipe /PVC lines & making good the same to its original condition (HSR No.30.95) c) size 75x50mm
P&F in position UPVC (SWR) 110x90mm size Nahani trap with jail of approved make i/c suitable jointing to enssue leak proof service & C.C 1:2:4 with stone aggregate 20mm nominal size under & around the trap where required upto floor level complete in all respects i/c cutting & making good the wall & floor etc. ) with 90mm i/d outlet.
C.C 1:2:4 with stone aggregate 20mm size in F&P (HSR item No 10.41)
Construction brick masonry inspection chamber size as given below upto 0.60 Mtr. average depth 1:5 lime concrete 1:2:4 benching 12mm thick cement plaster RCC 1:2:4 slab 100 mm thick/C.C toping 50 mm thick with 455x455 mm /455x610 mm inside light duty C.I inspection chamber cover & frame with 3 coats.HSR 29.84 (c) size 600x900mm inside ( with 455x 455 mm cover & frame)
Applying priming coat with metal primer on new steel or iron work including preparation of surface.(HSR Item No. 16.9)
Painting one coat with ready mixed paint for metallic surfaces in all shades on old steel or iron work.(HSR Item No.16.11)
Removing 60mm interlocking tiles (HSR Item 8.5(i))
Preparation of sub grade , including trenching, rough dressing of spoil , final dressing of earth, to given levels and camber, watering , rolling, with road roller and compacting the bed.(HSR 24.1)
Providing & laying 60 mm thick interlocking paver blocks of all shape and colours in design mix cement M-35 over a bed of 25mm thick fine sand complete in all respect. (HSR No. 10.158)
P&F of gum metal peet value of "leader" make as approved by Engineer -in charge, as per N.S item (A) 20mm
Cement concrete M 20 with stone aggregate 20 mm nominal size for reinforced concrete work in slab with inclinatin not excluding25 degree with horizontal, excluding steel reinforcement but including centering and shuttering laid in position complete in all respects. ( HSR 10.82a+10.95 a)
Provision of 1" dia first quality PVC Water Hose pipe.
Earth filling involving excavation of earth, carriage with an Av. Lead of 495m filling under floors and in the campus in 25Cm thickness watering and compacting complete to the entire satisfaction of Engineer in-charge
Providing lowering laying cutting jointing with rubber ring mark with IS 5382 & testing of spigot & socketed RCC NP2 mark with IS:458-1988 and specials into trnches for all depths including carriage, loading, unloading, stacking, handling, rehandling etc complte in all respect to the satisfaction to the Engineer-In-Charge.(HSR No. 29.93) 300mm I/D
Supplying of Manure for plants which includes all charges. (Rates are Quoted from estimate "External development of Office complex in Canal Colony Narnaul ".)
P&F SS Straight Security fencing in layer of 3 Nos wire including loading, unloading & fixing at site complete in all respect satisfaction to the Engineer-In-Charge. (NS Item)+(HSR Item 24.36 for labour Rate) TATA Make of weight 0.09kg per feet (Rates are quoted from estimate of laying of water supply sytem and other basic amenities in canal colony Narnaul)
Cleaning of RCC drain appx. 1000 ft length in front of Canal Campus which includes complete work of removing sludge,silt, waste material and dispose off away from site as satisfaction to the Engineer-In-charge. The rates includes all charges of labour, loading and unloading of waste, carriage and all other expenses.(NS Item)
Providing and fixing of peet valve at three different locations by cutting 3" GI pipe, thraeding, welding, flench and all other necessary fittings required complete satisfaction to the Engineer- In - Charge. (Analysis attached)
Providing and fixing of CI man hole cover of 27" x 27" of best quality such as Kamal make which icludes charges of loading, unloading, stacking, fixing, complete in all respect satisfaction to the Engineer- In Charge.(NS Items)(Analysis attached)
Plantation & Horticulture:- (i) Supply & Plantation of disease free healthy looking Tecoma 4'-5' tall multiple branches. Water with 25l . Water application of 10ml. Chlorpyriphos 20% EC (Drusban) stacking with 10' long 1.25" dia mtr painted with green paint bamboo stick, making of fine basin after 2 days plantation.
(ii) Supply & Plantation of disease free healthy looking Kaner Plant(Pink and Red flowers only) 4'-5' tall.Water with 25l . Water application of 10ml. Chlorpyriphos 20% EC (Drusban) stacking with 10' long 1.25" dia mtr painted with green paint bamboo stick, making of fine basin after 2 days plantation.
(iii) Supply & Plantation of disease free healthy looking Gulmohar Plant 5' tall. Water with 25l . Water application of 10ml. Chlorpyriphos 20% EC (Drusban) stacking with 10' long 1.25" dia mtr painted with green paint bamboo stick, making of fine basin after 2 days plantation.
(iv) Supply & Plantation of disease free healthy looking Kachanar Plant 4'-5' tall. Water with 25l . Water application of 10ml. Chlorpyriphos 20% EC (Drusban) stacking with 10' long 1.25" dia mtr painted with green paint bamboo stick, making of fine basin after 2 days plantation
(v) Supply & Plantation of disease free healthy looking Caffe samia(yellow Flower plant having multiple branches) Plant 4'-5' tall.Water with 25l . Water application of 10ml. Chlorpyriphos 20% EC (Drusban) stacking with 10' long 1.25" dia mtr painted with green paint bamboo stick, making of fine basin after 2 days plantation
(vi) Supply & Plantation of disease free healthy looking Amaltas Plant 4'-5' tall Multi branches.Water with 25l . Water application of 10ml. Chlorpyriphos 20% EC (Drusban) stacking with 10' long 1.25" dia mtr painted with green paint bamboo stick, making of fine basin after 2 days plantation
(vii) Supply & Plantation of disease free healthy looking Nimbu Plant 4'-5' (Hybrid)tall.Water with 25l . Water application of 10ml. Chlorpyriphos 20% EC (Drusban) stacking with 10' long 1.25" dia mtr painted with green paint bamboo stick, making of fine basin after 2 days plantation
(viii) Supply & Plantation of disease free healthy looking Jamun Plant 4'-5' (Hybrid)tall.Water with 25l . Water application of 10ml. Chlorpyriphos 20% EC (Drusban) stacking with 10' long 1.25" dia mtr painted with green paint bamboo stick, making of fine basin after 2 days plantation
(ix) Supply & Plantation of disease free healthy looking Sahtut Plant 4'-5' (Hybrid) tall.Water with 25l . Water application of 10ml. Chlorpyriphos 20% EC (Drusban) stacking with 10' long 1.25" dia mtr painted with green paint bamboo stick, making of fine basin after 2 days plantation
(x) Supply & Plantation of disease free healthy looking Beri Plant 4'-5' (Hybrid)tall.Water with 25l . Water application of 10ml. Chlorpyriphos 20% EC (Drusban) stacking with 10' long 1.25" dia mtr painted with green paint bamboo stick, making of fine basin after 2 days plantation
Credit of steel
Bagotia Placement Agency
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .