Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L2₹33.5 LAccepted-Finance | ₹33.5 L | L2 | Accepted-Finance ok |
| 2 | L2₹36.5 LAccepted-Finance | ₹36.5 L | L2 | Accepted-Finance ok |
Tender Value
₹45.9 L
EMD Value
₹91,835
Closing Date
2 Feb 2026, 3:00 pmClosed
Executive Engineer (E)
Executive Engineer (E) North West, Elect. Divn., PWD ISBT, Kashmere Gate, Delhi-110006
Providing fully automatic commercial laundry machine for male and female wing at Home for mentally retarded persons, Asha kiran, Sector-1, Avantika, Rohini, Delhi - 110085
2026_PWD_285711_1
167 Recall/EE(E)/NWED/PWD/2025-26
Open Tender
Electrical Works
30 days
Rohini
Please refer Tender documents.
9 documents required · 9 mandatory
₹0
₹91,835
Yes
6 Feb 2026
27 Jan 2026
2 Feb 2026
27 Jan 2026
2 Feb 2026
27 Jan 2026
Supplying, installation, testing & comunissioning of micro processor based PLC controlled fully automatic front loading heavy duty industrial Washer Extractor Machine with loading capacity of 60 kg dry weight per cycle, all outer body & inner basket and outer body drum made out of 2 mm thick stainless steel Gr.-304 sheet/ Plate, all outer body covers / Top sides made out of MS not less than 1.5 mm painted / Powder Coated, front loading door opening not less than 500 mm dia provided with automatic interlocks, single motor drive with variable frequency drive speed with 15 HP VFD for wash, distribution, low/normal/high spin speeds with wash RPM range of 45-50 RPM, spring suspension system with industrial grade shock absorber, programmable PLC (touch Screen) with operating auto presets, upto 300 G Force extraction, solenoid operated water inlet, motorized non-clogging drain valve, electrically interlocked loading & unloading door with see through glass window, fully programmable PLC control with presets, auto reversing, auto timing through micro controller based cyclic timer with fault protection, Touch Screen display with operation buttons and indicating lamps for on/off mode feature, auto digital temperature controls, auto water, auto drain, auto water level control, motor capacity 15 HP & also including heating water system for hot water suitable for operation on 415V, 3 phase, 50 HZ AC supply including connections etc. complete as required at site.
Supplying, installation, testing & commissioning of micro processor based PLC controlled front loading open pocket heavy duty industrial Drying Tumbler Machine with loading capacity of 60 kg dry weight per drum size 1250 mm dia x 965 mm Depth cycle, electrically heated with fin type air heating elements, duly powder coated sheet stoel double walled glass wool insulated body with stainless steel inner basket, electrically interlocked loading & unloading door with see through glass window, fully programmable PLC control with presets, auto reversing, auto timing through micro controller based cyclic timer with fault protection, LCD display, centrifugally balanced suction blower mounted directly on 2 HP motor, V-belt pulley mechanism driven cylinder for low torque & high speed, total load capacity of 30 Kw, emergency stop button suitable for operation on 415V, 3-phase, 50 HZ AC supply including connections etc. complete as required at site
Supplying, installation, testing & commissioning of heavy duty steam iron and vaccum table with following accessories etc. complete as reqd: i) Heavy Duty Vaccumized table of size 35 inch x 56 inch x 36 inch (1 no.) & utility table of size 8 inch x 16 inch x 35 inch (1 no.) ii) Heavy duty steam iron of 1.2 KW with steam pipe (2 sets) iii) Electric Automatic Boiler of 6 KW capacity of size 15 inch X 20
Fabricating, supplying & fixing of compartmentalized, totally enclosed, dust and vermin proof double door LT cubical feeder panel board of size 1.3 sq. mtr.(nominal size) front face area of 300 mm depth (N.S.) with lockable compartment doors & locking arrangement, bus bar alley made out of 2 mm thick CRCA sheet steel having 300A, 415V, 3 phase, 4 wire, aluminium bus bars, removeable gland plates for cable entry, duly powder coated with base frame angle iron (duly painted after applying red oxide priming coat) powder coated as per CPWD electrical specification incl. supplying & fixing of following electrical accessories incl. connections, interconnections etc. complete as reqd.: a)3 pole MCCB, 200A, 25KA-1 no. b)3 pole MCCB, 100A, 16KA- 3 nos. c) digital voltmeter- 1 no. d) digital ammeter- 1 no. e) LED indicators- 3 nos.
Supplying, laying & fixing of one number flexible PVC insulated and XLPE Al conductor power cable of 1.1 kV grade of following size on wall surface etc as required. (clamped with 1mm thick saddle) a) 3.5 x 35 sq. mm.
Supplying, laying & fixing of one number XLPE insulated PVC sheathed copper conductor armoured power cable of 1.1 kV grade of following size on wall surface etc as required. (clamped with 1mm thick saddle) a) 4 X 10 sq. mm.
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
Supplying and fixing following rating, TPN, 415 V, 10kA,"C" curve, miniature circuit breaker in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 63 A
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. a) 150 mm width X 50 mm depth X 1.6 mm thickness
b) 375 mm width X 50 mm depth X 2.0 mm thickness
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.78 MB
BOQ_378095.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid