Special Repair of Sanskrit College at Chakmoh

Providing and laying mechanically mixed in position cement concrete of specified grade excluding the cost of centering and shuttering 1:2:4 (one cement : two coarse sand: four graded stone aggregate 20 mm (twenty millimetre nominal size) all work up to plinth level including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 35 (thirty five ) milimetres thick including black enamelled M.S butt hinges flush door shutters decirative type core of black board construction with frame of first class hard wood and well matched first class Indian teak ply veneering with verical grains of cross bends and face veneering on both faces of shutters including entire carriage of materials up to all leads and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing fixing 35mm (thirty five milimetres) thick 1st class kail wood panelled ,glazed or panelled and glazed shutters for doors, windows and clerestory windows including black enamelled iron butt hinges with necessary screws including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 30mm (thirty millimetre) thick 1st class kail wood wire gauge shutters using galvanised Mild steel wire gauge of I.S gauge designation eighty five G with wire of dia zero point five six milimetres for doors, windows and clerestorey shutters for including bright finished black enamelled iron hinges with necessary screws including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing fly proof galvanized Mild steel wire gauge to windows and clerestory windows with 12mm mild steel U beading using wire gauge with average width of aperture1.4mm in both directions with wire of dia 0.63 mm all complete including entire carriage of materials up-to all leads and lifts.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 250×16mm( two hundred fifty into sixteen millimetre)including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :2000x10mm(two hundred into ten millimetre) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :150x10mm(one hundred fifty into ten millimetre) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm (one hundred twenty five millimetre) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100mm (one hundred millimetre) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 200mm ( two hundred millimetre) bright finished brass hard drawn hooks and eyes complete including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 10mm (ten milimetres) antiskid water proof stain and impect resistent heavyduty vitrified tiles of Kajaria/ Nitco or equilavent 600mmx600mmx10mm (six hundred milmimetres into six hundred milimetresinto ten milimetres) manufactured of approved shade and colours in flooring, treads, of steps and landings laid over 20mm(twenty milimetres) thick cement mortar1:3 (one cement: three approved sand)jointed with cement slurry mixed with pigment to match the shade of tiles as required including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing ceramic glazed floor tiles made of Kajaria/ Nitco first class quality conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm(twelve millimetre) thick bed of cement Mortar 1:3 (one cement: three approved coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (three point three kilogram per square metre) including pointing in white cement mixed with pigment of matching shade complete including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Painting wood work with Asian/Deluxe Multi SurfacePaint to give an even shade. Two or more coat applied @ 0.90 ltr/10sqm (zero point nine zero litre/ ten square metre) over an under coat of primer applied @ 0.75 ltr/10sqm (zero point seven five litre /ten square metre)of approved brand and manufacture including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying 15mm (fifteen milimetres) cement plaster on both sides of single or half brick wall of mix 1:5 (one cement: five coursed sand) up to all floor levels including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Rnewing plain glass panes of nominal thickness 4 mm (four milimetres) (weight not less than 10 kg/sqm(ten kilogram/square metres), with putty and nails wherever necessary including racking out the old putty as per direction of Engineer-in-Change including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Demolition of reinforced cement concrete work manually/ by mechanical means up to all levels stacking of steel bars and disposal of unserviceable materials with in all leads and lifts and including cutting the necessary reinforcement and separating out from reinforced cement concrete work as per the direction of Engineer-in-charge. including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Dismantling doors, windows and clerestory windows (steel or wood) shutters of area beyond 3.00 Sqm (three square metres) including chowkhats, architraves, holdfasts etc. complete and stacking within all leads and lifts including entire carriage of materials up to all leads and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Dismantling tile work in floors for thickness of tiles up to 25mm (twenty five millimetres) laid in mortar up to floor two level including stacking of serviceable materials and disposal of un-serviceable materials up to leads including entire carriage of materials up to all leads and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing chlorinated polyvinyl chloride15mm nominal dia pipes internal work of Supreme/ Finolex/Kitch make or ISI approved quality having thermal stability for hot & cold water supply, including all necessary CPVC plain & brass threaded fittings, including fixing the pipes with clamps at 1.00 metre spacing. This includs jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing chlorinated polyvinyl chloride20mm nominal dia pipes internal work of Supreme/ Finolex/Kitch make or ISI approved quality having thermal stability for hot & cold water supply, including all necessary CPVC plain & brass threaded fittings, including fixing the pipes with clamps at 1.00 metre spacing. This includs jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing white Vitreous china W.C. pan of Cera Make or equivalent with ISI marked white solid plastic seat and lid pedestal type water closet (European type W.C pan) with seat and lid, 10 litres low level white P.V.C. flushing cistern , including flush pipe, with manually controlled device (handle lever),conforming to IS:7231, with all fittings and fixtures complete, including and making good the walls and floors wherever required:The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china wash basin of cera make or equivalent with a size of Flat back 550X 400 MMX195 (five hundred fifty into four hundred into one hundred ninety five millimeters) size of approved quality with15mm CP Brass pillar taps, 32mm C.P. brass waste of standard pattern of Jaguar/ Hindware with C.I of M.S brackets painted white including all necessary fittings required at site and making good and as per the satisfaction of Engineer –in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings to the entire satishfaction of Engineer-in-charge The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 32 MM (thirty two millimeters) M.I. union of approved quality for wash basin to the entire satisfaction of Engineer-in-charge.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 600X 450mm (six hundred into four hundred fifty millimeters) bevelled edge mirror of Atul/ modi or equivalent make of superior glass mounted on 6 mm (six millimeters) thick A.C sheet or plywood sheet or plastic sheet and fixed with chromium plated brass screws and washers to the entire satisfaction of Engineer –in-charge.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and Fixing chromium plated brass soap dish with chromium plated brass brackets fixed to wooden cleats with chromium plated brass screws to the entire satisfaction of Engineer –in-charge.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15 MM( fifteen millimeters) diameter chromium plated brass bib cock of approved quality conforming to IS:8931 of Hind ware/Cera/Jaguar make complete to the entire satisfaction of Engineer-in-Charge.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15MM( fifteen millimeters)diameter chromium plated brass pillars taps with capstan head ofapproved quality conforming to ISI of Cera/ Hindware make complete to the entire satisfaction of Engineer-in-Charge. The rates are inclusive of octorii, royality, malkana, tolltax, GST or other taxes imposed by the Government.

Providing and fixing 15 MM (fifteen millimeters) dia chromium plated brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 of Cera/Hindware/Jaguar make complete to entire satisfaction of Engineer –in-charge.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15 MM (fifteen millimeters) diameter PTMT stop cock of approved quality conforning to ISI specificatios of Supreme/Finolax/ Astral Make stop cocks standard design and colour complete to the entire satisfaction of Engineer –in-charge.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 20 MM (twenty millimeters) diameter PTMT stop cock of approved quality conforning to ISI specificatios of Supreme/Finolax/ Astral Make stop cocks standard design and colour complete to the entire satisfaction of Engineer –in-charge.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 32MM (thirty two milimetres) dia P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete and make as approved by Engineer –in-charge.including entire carraige of materials in all leads and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen millimeters) nominal bore unplasticised PVC connection pipe with brass unions 45 (forty five centimetres) length finolex/ Hindware/ Cera/Jaguar make complete including entire carriage of materials in all leads and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110X90 MM ( one hundred ten into ninety millimeters ) polyvinyl chloride floor trap confirming to ISI specifications of Finolex/Supreme of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor complete in all lead& lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing high pressure Polyvenyl chloride spigot and socket,waste and ventilating pipes conforming to ISI specifications including fixing with approved adhesive etc complet to the entire satisfaction of Engineer –in-charge (i) 110mm (one hundred ten milimetres) diametres.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing high pressure Polyvenyl chloride spigot and socket,waste and ventilating pipes conforming to ISI specifications including fixing with approved adhesive etc complete to the entire satisfaction of Engineer –in-charge (i) 90mm (Ninety milimetres) daimetres.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing PVC(polyvinyl chloride) single equal branch with oval access door, insertion rubber washers 3mm thick bolts and nuts ISI marked and approved qualitycomplete including fixing with approved adhesive etc complete including entire carriage of materials up to all leads and lifts (i) 110 mm (one hunderd ten milimetres) diametres

Providing and fixing PVC(polyvinyl chloride) single equal branch with oval access door, insertion rubber washers 3mm thick bolts and nuts ISI marked and approved qualitycomplete including fixing with approved adhesive etc complete including entire carriage of materials up to all leads and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. (i) 90mm (ninety milimetres) diametres

Providing and fixing PVC(polyvinyl chloride) plain bend of ISI marked and approved qualitycomplete including fixing with approved adhesive etc complete including entire carriage of materials up to all leads and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government(i) 110mm (one hunderd ten milimetres) diametre

Providing and fixing PVC(polyvinyl chloride) plain bend of ISI marked and approved qualitycomplete including fixing with approved adhesive etc complete including entire carriage of materials up to all leads and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government (i) 90mm (ninety millimetres) diametres

Providing and fixing 8mm dia C.P/S.S Jet with flexible tube upto 1.00 Metre long with S.S triangularplate to European type W.C of quality and make Jaguar/Cera/Hindware as approved by Engineer-in-charge including entire carriage of materials in all leads and lifts.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing100 MM (one hundred millimeters) diameters chromium plated grating of superior quality for floor, gully or nahani trap to the entire satisfaction of Engineer –in-charge.The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

AKSHAY MAHAJAN (BID ID -531710)

KAUSHAL PATIAL (BID ID -531182)

Daljeet Singh (BID ID -531754)