VIII.11001/Engr/MW/2025-26/06

Amount

Removing white or colour wash by scrapping ans sand paperring preparing the surface smooth including necessary repairs to scratches etc. comlete

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture, over the plaster wall surface to prepare the surface even and smooth complete.

Repair to plaster of thickness 12 mm to 20 mm in patches area 2.5 Sqm and under including , cutting the patches proper Shapes ,racking out joints and preparing and plsatering the surface of the wall complete , including diposal of rubbish

Distempering with 1st Quality acryclic distemper having VOC content less than 50 grams / litre of approved brand and manufacture to give an even shade Old work (one or more coats.)

Finishing wall with Acryclic Smooth exterior paint of required Shade Old work on existing cement paint surface.

Painting with synthetic enamel paint of approved and manufacture of required colour to give an even shade. One or more coats on old work.

Dismantling wooden Plywood Ceiling including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, 12.5 mm thick tapered edge gypsum moisture resistant plain board

Dismantling taking out doors, window and cleareastory windows shutter including chowkhats, architrave, holdfasts etc complete and stacking within 50 meters lead.

Providing and fixing double glazed in aluminium windows, ventilators and partitions etc with 6 mm thick clear float glass both side having 12 air gap, including providing EPDM gasket, perforate aluminum psacers etc. as per Engineer direction.

Providing and fixing 35 mm thick factory made laminated lumber door shutter confirming to IS 14616 and fixing with butt hinges of required wize with necessary screws all complete as per directions of Engineer In Charge.

Finishing walls/ Ceiling with Premium acrylic emulsion paint , Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) :

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC concealed, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group A

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 1.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required . 2 x 2.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required . 2 x 4.00 sq. mm

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amp switch.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required 3 pin 5/6 A socket outlet

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required 3 pin 15/16 A socket outlet

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 AMP

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 AMP

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required

M/s AMAR NATH PANWAR (BID ID -3233258)

M/S MD FAREED (BID ID -3233603)