Special repair to Building No P-79, P-80 and P-81 at Jalandhar Cantt under GE East Jalandhar Cantt

Amount

M & L wire brushing and cleaning top sureace of cement concrete , including flashing and junction of parapets,and applying a coat of cement slurry @3 Kg/ Sqm all as specified.

M & L for a coat of Bitumen grade 85/25 @ 1.20 Kg per sqm over 15mm thick CM 1:3 using water proofing compound and polyster tringular fibre 0.6mm@125 gm/cement bag (50 Kg) equivalent as per manufacturer's instructions surface finish even and smooth using extra cement all as specified and directed ( Note:- WPC & polyster triangular fibre shall be measured and paid separately.)

Supply only polyster triangular fibre 0.6mm as secondary reinforcement in all type of concrete and mortar complete all as specified.

Supply only integral water proofing compound conforming to IS-2645 complete all as specified.

M&L cement concrete 1:1.5:3 type A-0 using 12.5 mm graded stone aggregate as in roof kerbs PCC as in kerbs/covet fillet complete all as specified.

Taking down of cement plaster on brick wall of any description thickness incl racking out joints, hacking for key scrubbing down with water and prepared to receive plaster complete all as specified .

M&L for rendering 15mm thick in cement Mortar 1:4 on fair faces of brick Walls or on concrete Surfaces finished even and smooth without using extra cement complete all as specified and as directed

M&L rendering on concrete/brick surfaces 12 mm thick in CM 1:6 finished even and and smooth without using extra cement complete all as specified

M&L for 5 mm thick rendering in CM 1:3 on concrete surfaces as on ceiling and finished fair and even complete all as specified and directed.

M & L for 15mm thick plaster in CM 1:3 two layers, first layer of 10mm thick plaster in cement mortar 1:4 & second layer of 5mm thick in cement mortar 1:3 as in chajjas, beam balcony fins etc with & including wire netting of galvanized steel wire 0.91mm dia and mesh size 12mm placed in between the two plaster layers, fixed with tinned tack or wire stapled where required to make to original shape at any height to repair chajjas, beam balcony fins etc in multistoreyed buildings, top layer of plaster finished even & smooth without using extra cement complete including cleaning and preparation of existing RCC surfaces and applying a coat of cement slurry complete all as specified and directed. Note : Each layer of plaster shall be done separately.

M&L preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfacces and applying three coat of white wash as in ceilling complete all as specified and as directed.

M&L for applying one coat of white wash on old decorated plastered or unplastered surfaces of walls complete all as specified and directed.

M&L for applying one coat of white wash on old decorated plastered or unplastered surfaces of ceiling complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over priming coat complete all as specified new surface of walls complete all as specified and directed.

M&L for preparation of Old surfaces of walls and applying one coat of cement base paint over primer complete all as specified new surface of walls complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates ,rails,braces etc complete drilled for fixing of steel gate or sheeting or other covering,doors ,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,runing rails and guides ) and hanging also fastning and fixing complete all as specified and directed. confirming to Gde Fe-290 (E-165) complete all as specified.

Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) all as specified.

M&L for machine cut Kota stone slab flooring,18 to 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be rounded including 15mm thick screed bed to floor finishes in cm 1:4 complete all as specified and directed.

M&L 18 to 20 mm thick machine cut kota stone as in vertical surfaces risers of steps , skirting, dado and pillars etc set and jointed in neat cement slurry and pointed with grey cement mixed with pigment to match the colour of stone slab laid over and including 10 mm thick rendering in cement mortar 1:4 including rubbing and mirror polishing complete all as specified.

M & L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base, sub floor of flooring, paving, path etc surfaces finished even and fair to receive top layer complete all as specified and directed.

M & L 100 mm thick PCC (1:2:4) type B-2 using 20mm graded stone aggregate as in flooring, paving, path etc surfaces finished even and fair complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, built in cement mortar complete all as specified.

M&L for brick work with sub class ‘B’ brick, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified .

All as per ser item No- 24 all as specified but except bricks only complete all as specified.

Taking down chowkhats or frame with shutter without taking off shutter from the frame area not exc 1.5 Sqm each all as specified.

Taking down Chowkats or Frame with shutter(without taking of shutter from the frame) area exc. 1.50 Sqm but n exc 4 Sqm complete all as specified.

Supply & Fixed 125x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in filling of pressed steel door frame complete all as specified and directed.

S & F for 2nd class H/W panelled shutter 35mm thick (any number of panels) with panels of timber flat on both sides (feathers edged) or venerred particle board medium density, wood particle board with commercial face veneers complete all as specified.

S&F 35mm thick 2nd class hard wood glazed or Skeleton shutter factory made open rebated prepared to receive glass, gauge etc without sash bars edges of framing plain fitted with cut and mitred beads for securing glass etc size of member all as per clause 8.23 (a) of SSR Part-I complete all as specified.

S & F in repair steel window/vent 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mmx25mm single rebated comprises glazed skeleton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bars of T-section 20mmx3mm complete welded to frame with one verticle mulion of ERW box type T-section of size 60mmx25mm and 1.25mm thick incl cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four Nos for each window) including following fittings welded to frame shutter: - (a) Hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window. (b) Handle of z section 20mmx25mm, 100mm long 01 Nos per leaf (c) MS tower bolt 150mm long-2 Nos per leaf (d) z section 20mmx25mm, 100mm long stopper - 01 No per leaf (f) MS pintal hinges of size 75mmx12mm- 2 Nos per leaf (g) Fabrication & fixing arrangement as per Drg No CEJZ/TD-1019/08 & 1020/08 Sh 1/3 to 3/3. Note: glass panels and painting shall be measured & paid separately under respective item of schedule.

Ditto all as per description ser item No- 32 but window with glazing bars but with out sash bars . Note wire gauge and painted shall be measured and paid separately under respective item of schedule. Note for items 32 & 33 Drg No. CEJZ/TD- 1019/08 & 1020/08 Sh 1/3 to 3/3 are not being uploaded & same can be seen in this HQ on any working day

All as per Item no. 32 but as in ventilators complete all as specified.

S & F mild steel framed work such as guard bars/grills, grating etc with end of bars shouldered and/or riveted or forged into spikes and similar works incl one shop coat of zinc chromate primer conforming to Gde Fe-290 (E-165) complete as specified.

Supply & Fix stainless steel wire cloth 0.36mm nominal dia of wire and average widht of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm each panes complete all as specified.

S&F 300mm long mild steel ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and directed.

S&F MS tower bolt bolts with bright bolt and fixed 200mm in size complete all as specified.

S & F 250mm long MS sliding door with bolt, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified.

S & F 125 mm long MS pressed handles cast type, stove enamelled black complete all as specified.

S & F 100 mm MS butt hinges complete all as specified.

S&F 50 mm size butt hinges, medium weight , cold rolled, mild steel and fixed complete all as specified and directed

S&F small fittings such as brackets of any type latch and hinge block, shaped door window stops and the like in Ist class hard wood article not exc 200 cucm each complete all as specified and directed.

Cutiing holes in brick walls exc half brick but n exc on brick built in cement mortar for inserting hold fast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 tyupe B1 as required complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

S&F steel rolling shutter 1.25mm thick without ball bearing as specified including top cover ,anchoring rod ,hasp and staple and one shop coat of primer ;erected in position as indicated ,complete, but gear operated type with bevel gear box and crank handle complete all as specified.

M&L for preparation of newly surface of steel and iron surface of any description over 10CM width or girth and applying two coats of synthetic enamel paint complete all as specified.

Material and labour for preparation of old painting steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wood surface of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for preparation of Old wood surface of any description over 10CM width or girth and applying one coat of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L hard core with broken stone or boulders of gauge exc 63 mm but n exc.100mm, deposited spread & levelled in layers n.exc 15 cm thick water & rammed true surface complete all as specified.

M&L for 50 mm thick PCC 1:2:4 type B-1 using 20mm stone graded aggregate as in plinth protection and path finishing the surface even and smooth without using extra cement all as specified

S&F 0.56mm plain Aluminium sheeting alloy 31000 H4 in fixed with screwes as in crumple (length and girth ) complete all as specified and directed.

Taking down carefully existing point wiring aluminum/ copper conductor for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, lights fitting, regulator, wooden board and making good disturbed portion to match with existing complete all as specified and directed.

Material & labour for concealed point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated and unsheathed cable 1100 volts multistranded, copper conductor cable (FRLS) drawn through and including PVC concealed conduit not less than 20mm dia bore medium grade (ISI marked) and accessories like bends, tees, junction boxes etc, fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS , copper conductor multistranded cable as earth wire including sunken pressed steel terminal boxes and bakelite laminated white/ coloured top sheet cover 3.0 mm thick , for One light point / fan point controlled by one way switch complete all as specified and directed.

All as per srl item No 56 here-in-before but socket out let 3 pin, 5 Amp on on independent board complete all as specified.

All as per srl item No 56 here-in-before but 3 pin, 5 Amp on same board with other switch complete all as specified.

All as per description of srl item No 56 here in before but using 2.5 sqmm (nominal area) PVC stranded copper conductor cable with 2.5 Sqmm PVC insulated copper cable PVC conduit and accessories not leass than 20 mm dia for continuous earth continuity conductor for 3 pin socket out let 15 Amps on independent board complete all as specified.

Supply and fix switch piano flush type, 5 Amps, 230V AC, single pole, one way complete all as specified and directed

Supply and fix switch piano flush type, 15 Amps, 230V AC, single pole, one way complete all as specified and directed

Supply and fix socket out let 5 Amp 5 pin flush type complete all as specified.

Supply and fix switch socket combination out let universal type 6 pin 5/15 Amp multi pin complete all as specified.

Supply and fix ceiling rose surface type bakelite 65 x 50 mm three terminal PVC / Polycarbonate isolated body complete all as specified.

Material and labour for sub main wiring with two runs of single core PVC insulated (FRLS) unsheathed copper conductor multistranded cable of size 4 sqmm 1100 volts grade drawn through in & including PVC conduit not less than 20m dia & 4 sqmm single core copper conductor multistranded PVC insulated (FRLS) unsheathed cableas earth wire continuity conductor complete all as specified and directed by Engineer in charge. Note : (i) Two run of cable 4 sqmm and one run of 4 sqmm earth wire alongwith PVC conduit shall be measured and paid as one unit only.

Supply and fix MCB SP 6 to 32 Amp, 240 volts,10 KA, B-curve complete all as specified and directed.

Supply and fix MCB SPN 6 to 32 Amp, 240 volts,10 KA, B-curve complete all as specified and directed.

Supply & fixing in repair energy saving tube light luminaire work diffuser LED with comprising with CRCA MS box and 4 feet 20 watt (min) retro fit tube rod having thermally conductive material lumen output 2100 lumens (min) 6500 K, power factor more than 0.95, IP-20 Class-I protection with inbuilt LED driver, surge protection upto 2 KV, operative on 140 volts to 270 volts AC supply products must be made in India only, complete prewired, connection and testing complete all specified and directed Make:C & S Cat Part No LTDCD1220W LED/WD or equivalent makes as in Appx 'B'

Supply and fix lamp holder PVC/Polycarbonate with back plate suitable for batten fittings including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed.

Taking down and refixing ceiling fans of any make and type, painting of fans complete (as per previous colour) with synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc including replacement of flexible wire, rubber reel, nuts, bolts complete all as specified and directed.

Supply and fix fan regulator, electronic type, five steps socket type single phase, including connection complete all as specified and directed.

M & L for sheet metal for DB's with 200 Amp rated bus bar double door epoxy coated paint inside and outside 12 way all as per specified and directed.

Supply and testing laying XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable (Heavy duly) 1100 Volts grade with standed aliminum conductor of size 16 Sqmm 2 core complete all as specified

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc and getting out in soft/loose soil complete all as specified and directed.

Returning filling in layers including leveling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed.

Removing excavated material n not exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed.

Supply and filling for sand cushioning 8 cm before laying of cable & 15 cm after laying of cable complete all as specified Note :- Punned down thickness shall be measured

Supply only old size sub class ‘B’ bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed

Supply and fixing GI pipe ISI Marked of size 40mm dia bore for cable protection under road/floor along the pole including fittings complete all as specified and directed.

Material and labour for earthing complet with galvanised steel earth plate electrode 60cmx 60cmx 6.00 mm thick buried directly in ground (Earth pit not less than 2.25 metre below normal ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected and including GI wire 4 sqmm dia by means of GI bolts, nuts, check nuts and washers, earth plate surrounded by packed alternate layers of coal dust and common salt 15cm thick, all around top and bottom and watering pipe 20mm bore of GI pipe light grade with funnel and wire mesh and 20mm bore GI pipe light grade for protection of GI wire 4 sqmm dia from top of earth plate upto test point (upto 7.5metre in length) connected with suitable size of GI nuts, bolts and washers all as shown in Electrical plate No. 3 of SSR Part-I, testing on completion including excavation/earth work in any type of soil/rock, PCC chamber (1:3:6) using 20mm graded stone aggregate and 50mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways with suitable handle for lifting arrangement & including formwork and MS frame using MS angle iron 40x40x6mm complete all as specified and directed. Note :- Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit.

Supply and fix in repairs energy saving & environmental friendly long life versalite pressure die-cast aluminium luminaire with heat resistant glass and suitable optics for uniform distribution of light 20 watt LEDs building security lights with high efficiency electronic driver, having IP 65 protection, surge protection min 2 KV power factor more than 0.9 complete operative on AC supply 140 volts to 270 volts pre-wired and product should be made in India qty including bracket made out of GI pipe 32mm dia bent to shape and clamp 40x6mm with nuts and bolts. Make :Havells cat part No.ENDURAPEARLSL20WLED757SASYTOPC or equivalent as mentioned in appendix 'B' Note (i) Contractor shall provide 2 years written manufacturer's warranty for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall produce LM-79 & LM-80 report of NABL accedited labortory from manufaturers.

Supply and fixing LED bulb 5 watt suitable for B 22 base holder 5 star lamp 6500K as per Havells cat part No. LHLDERUEMD8X005 or equivalent make as mentioned in Appx 'B'

M/s Nirmal Singh and Co.

THAPAR CONSTRUCTION COMPANY

M/S Vinod Kumar

M/s Pardeep Kumar

NATIONAL BUILDERS