Construction of Balashastri Jambhekar Smarak

Amount

Item No. 1 :- Excavation for foundation in earth, soils of all types, sand gravel and soft murum including removing the excavated materials upto a distance of 50 meters beyond the building area including all leads and lifts upto 1.5 metre, stacking and spreading as directed including dewatering, unless provided elsewhere preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete.

Item No. 2 :- Excavation for foundation in earth, soils of all types, sand gravel and soft murum including removing the excavated materials upto a distance of 50 meters beyond the building area including all leads and lifts upto 1.5 metre to 3.00 metre, stacking and spreading as directed including dewatering, unless provided elsewhere preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete.

Item No. 3 :- Excavation for foundation in hard murum including removing the excavated materials upto a distance of 50 meters beyond the building area, including all leads and lifts stacking and spreading as directed including dewatering, unless provided elsewhere preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete.

Item No. 4 :- Providing soling using 80 milimeter size trap metal in layers of 15 centimeter each including hand packing, filling voids with sand, ramming, watering etc. complete.

Item No. 5 :- Providing and laying in situ, cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, compacting and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer, With natural sand.

Item No. 6 :- Providing and laying in situ cement concrete M-25 of trap / granite /quartzite/ gneiss metal for Reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced cement concrete columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer. With natural sand.

Item No. 7 :- Providing and casting in situ cement concrete M-25 of trap / granite /quartzite/ gneiss metal for Reinforced cement concrete columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 8 :- Providing and casting in situ cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 9 :- Providing and casting in situ cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for Reinforced cement concrete slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No.10 :- Providing and casting in situ cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced cement concrete pardi of required thickness including centering, formwork, cover blockscompacting , curing , finishing & roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer.With natural sand.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 11 :- Providing and casting in situ cement concrete in M-25 of trap / quartzite /granite /gneiss metal for Reinforced cement concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) (Wooden centering will not be allowed)

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 12 :- Providing & casting in situ cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced cement concrete chajja as per detailed design & drawings including centering, formwork, cover blocks compacting , curing , finishing & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No.13 :- Providing and casting in situ cement concrete in M-25 of trap / granite /gneiss / quartzite metal for Reinforced cement concrete fins of required thickness in position as shown on the drawings or as directed by Engineer-in-charge including steel centering, plywood / steel formwork, steel props, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block) Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed)

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No.14 :- Providing and casting in situ cement concrete in M15 of trap/ granite/quartzite/gneiss metal for plain or molded sills, cornice, jambs, block in course, or architraves of required size and shapes including steel centering, plywood/steel formwork, compacting, roughening them if special finish is to be provided,finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer etc. complete, With Natural Sand.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No.15 :- Providing and casting in situ cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)

Item No.16 :- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for Reinforced cement concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. a) For TMT Fe 415 steel bars

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 17 :- Providing laterite stone masonary in cement mortar 1:6 in foundation and plinth including striking joints on the unexposed faces and watering complete.

Item No. 18 :- Filling in plinth and floors with contractors material / brought from outside and approved by Engineer incharge in layers of 15cm. to 20cm. including watering and compaction etc. complete.

Item No. 19 :- Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.

Item No. 20 :- Providing laterite stone masonary in cement morter 1:6 in Superstructure including racking out joints where plastering is to be done watering and scaffolding complete. ( Laterite stone six sides cut and thickness of morter joints shall be 12milimeter max. )

Item No. 21 :- Providing 15 centimetre thick laterite stone masonary in cement mortar 1:4 including scaffolding, racking out joints and watering complete. ( Size of laterite stone 350 millimetre x 275 millimetre x 150 millimetre ) (6 sides cut) (Mortar joint thickness not more than 12 millimetre )

Item No. 22 :- Providing Autoclaved areated concrete block masonry of approved manufacturer confirming to IS 2185 Part III 1984 of size 600 millimetre x 200 millimetre having thickness 100, 150, 200 or 250 millimetre in cement mortar 1:6 in super structure including striking joints, racking out joints watering and scaffolding complete.

A) For Basement + Ground Floor

B) For First Floor

C) For Second Floor

Item No. 23 :- Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 millimetre to 20 millimetre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 24 :- Providing and fixing machine cut mirror polished 18 millimetre to 20 millimetre thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete. One side polish

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 25 :- Providing sills of required material 20 millimetre to 25 millimetre thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges, cleaning complete. a) Marble other than white makrana

Item No. 26 :-Providing and fixing Vitrified Matt Finish tiles of Kajaria / Nitco / Bell or Rak / Jhonson equivalent make having size 590 milimeter to 605 milimeter x 590 milimeter to 605 milimeter and minimum thickness of 8 to 10 milimeter and confirming to Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement flout, filling joints with white / coloured cement slurry, cleaning, curing with all leads and lifts etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 27 :-Providing and fixing Vitrified Matt Finish tiles of Kajaria / Nitco / Bell or Rak / Jhonson equivalent make having size 590 milimeter to 605 milimeter x 590 milimeter to 605 milimeter and minimum thickness of 8 to 10 milimeter and confirming to Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for Dado and Skirting in required position laid on a bed of 1:4 cement mortar including neat cement flout, filling joints with white / coloured cement slurry, cleaning, curing with all leads and lifts etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 28 :- Providing and laying in position machine cut machine polished kota stone flooring of approved quality 25 millimeter to 30 millimeter thick in plain/ diamond pattern on a bed of cement mortar 1:6 including cement float filling joint with neat cement slurry, polishing and cleanning etc. with all leads and lifts etc. complete.

A) For Ground Floor

B) For First Floor

Item No. 29 :- Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete. For Skirting

A) For Ground Floor

B) For First Floor

Item No. 30 :- Providing and laying Antiskid Ceramic Tiles of approved quality of company Kajaria / Nitco / Asian or equivalent make having size 30 centimetre x 30 centimetre and confirming to IS 15622-2006 ( Group B IIA ) for antiskid flooring in required positions laid on bed of cement morter 1:4 including neat cement float, filling joint with white / colour cement slurry, cleaning, curing with all leads and lifts etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 31 :- Providing and laying ceramic tiles of RAK / Kajaria / Nitco / Asian or equivalent make having size 30 centimeter x 30 centimeter and 8 milimeter thickness for dado and skirting in required position with ready made adhesive mortar of approved quality in required position after making the wall portion in level with plaster of cement mortar 1:4 including filling joints with white / colour cement slurry, cleaning, curing with all leads and lifts etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 32 :- Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80 millimetre thick in M-40 grade of approved size and shape for City streets, small /medium market roads, low volume roads, utility cuts on arterial roads etc. as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. complete.

Item No. 33 :- Providing and laying chequered tiles of approved quality of company RAK / Kajaria / Nitco / Asian or equivalent make of size 30 centimetre x 30 centimetre for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.

Item No. 34 :- Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete.

Item No. 35 :- Providing 25 millimetre to 30 millimetre thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. a) One side polish

Item No. 36 :- Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.

Item No. 37 :- Providing water proof bedding for flooring of Bath and WC 25 millimetre thick in cement mortar 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs. 500/- including ponding test etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 38 :- Providing internal cement plaster 6 millimetre thick in cement morter 1:3 in a single coat without neeru finish to concrete surface in all position including scaffolding and curing.

Item No. 39 :- Providing internal cement plaster 6 millimetre thick in cement morter 1:3 in a single coat with neeru finish to concrete surface in all position including scaffolding and curing.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 40 :- Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete / B.B.masonry and or tying by binding wire etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 41 :- Providing internal cement plaster 12 millimetre thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete.

A) For Ground Floor and Basement

B) For First Floor

C) For Second Floor

Item No. 42 :- Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 millimetre thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 millimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

A) For Ground Floor and Basement

B) For First Floor

C) For Second Floor

Item No. 43 :- Providing groove to required size at specified location as directed by Engineer, at junction of brick masonry wall and R.C.C beams or Column, at junction of composite masonry, including scaffolding, finishing, curing etc. complete.

A) For Ground Floor and Basement

B) For First Floor

C) For Second Floor

Item No. 44 :- Providing patti / band 150 millimetre wide on plastered surface 12 millimetre to 15 millimetre thick in cement mortar 1:3 line and level including neat finishing scaffolding curing etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 45 :- Providing and fixing Ghana teak wood joists and girders in timber floors of single, double or framed type including scaffolding if necessary and one coat of primer etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 46 :- Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x 100mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 47 :- Providing and fixing single leaf panelled door shutter without fanlight and shutter 35 millimetre thick as per drawing consisting of Ghana T.W. top rail size 100 millimetre x 35 millimetre and bottom and lock rail 200 millimetre x 35 millimetre insert panel 12 millimetre thick commercial ply faced T.W. particle board with phenol formaldehyde synthetic resin (Generally confirming to ISI 3097) excluding frame, including stainless steel fixtures fastening and T.W. beading at junction of panels inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 48 :- Providing and fixing fiber glass reinforced polyster door shutter 35 millimetre thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 49 :- Providing and fixing 30 millimetre thick RAJSHRI or equivalent BRAND FACTORY MADE PVC FLUSH L DOOR SHUTTER consisting of panel of hollow PVC profile of 20 mm thickness consisting frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mminserted inside the hollow section of stiles rails top ?and bottom rails and two 19x 19 mm MS tubes inserted horizontally inside the hollow profile section using 4/5 mm sheet using screws hollow profile shall be lipped with 10 mm ( 5mm x2) thick x 20 mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof waterproof plain /prelam PVC sheet using solvent cement on the both sides of the panel including stainless steel fixtures and fastening etc. Complete as per direction of Engineer-in-charge, manufacturers specification & drawing.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 50 :- Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box

A) For Ground Floor

Item No. 51 :- Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating without box

A) For Ground Floor

B) For First Floor

C) For Second Floor

C) For Second Floor

Item No. 53 :- Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

A) For Ground Floor

Item No. 55 :- Providing and fixing mild steel grill work for windows, ventilators, weighing 15 kilogramme per square meter as per drawing and design including necessary fixtures, welding and painting with one coat of anticorrosive paint and two coats of oil paint including all leads and lifts etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 56 :- Providing and fixing mild steel grill railing 20 kg/sq.m with Ghana teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 57 :- Providing and fixing 900 millimetre high S.S.304 Grade Stainless steel railing with 40 millimetre diameter and 1.5 millimetre thick at top,40 millimetre diameter and 1.5 millimetre thick vertical supports spaced at 1.5 metre center to center and millimetre mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 58 :- Providing and fixing H.D.P.E. container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres.

C) For First Floor

Item No. 59 :- Providing and laying in trenches 50 millimetre diametre Chlorinated Poly Vinyl Chloride ( CPVC ) pipe including necessary excavation, fittings, refilling trenches etc. complete.

A) For Ground Floor

Item No. 60 :- Providing and fixing on walls/ ceiling/ floor 50 millimetre diameter Chlorinated Poly Vinyl Chloride ( CPVC ) pipe with necessary fittings, remaking good the demolished portion etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 61 :- Providing and fixing on walls/ ceiling/ floor 40 millimetre diameter Chlorinated Poly Vinyl Chloride ( CPVC ) pipe with necessary fittings, remaking good the demolished portion etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 62 :- Providing and fixing on walls/ ceiling/ floor 25 millimetre diameter Chlorinated Poly Vinyl Chloride ( CPVC ) pipe with necessary fittings, remaking good the demolished portion etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 63 :- Providing and fixing on walls/ ceiling/ floor 20 millimetre diameter Chlorinated Poly Vinyl Chloride ( CPVC ) pipe with necessary fittings, remaking good the demolished portion etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 64 :- Providing and fixing on walls/ ceiling/ floor 15 millimetre diameter Chlorinated Poly Vinyl Chloride ( CPVC ) pipe with necessary fittings, remaking good the demolished portion etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 65 :- Providing and fixing screw down wheeled stop tap or brass of approved quality and make bearing I.S.I. mark, including necessary sockets, union, nuts etc. complete. A) For Ground Floor

i) 15 millimetre diametre

ii) 20 millimetre diametre

iii) 25 millimetre diametre

iv) 50 millimetre diametre

B) For First Floor

i) 15 millimetre diametre

ii) 20 millimetre diametre

iii) 25 millimetre diametre

iv) 50 millimetre diametre

C) For Second Floor

i) 15 millimetre diametre

iii) 25 millimetre diametre

iv) 50 millimetre diametre

Item No. 66 :- Providing and fixing Chromium Plated Angular stop clock with wall flange Jaquar make or equivalent continental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 67 :- Providing and fixing Chromium Plated Two way BIB cock Jaquar make continental ( CAT. No. CON-041 ) or equivalent including necessary sockets / union nut etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 68 :- Providing and fixing Chromium Plated Wall mixer with provision for overhead shower with 115 millimetre long bend pipe and wall flange Jaquar make continental ( CAT. No. CON-273 UPR ) or equivalent including necessary sockets / union nut etc. complete.

C) For Second Floor

Item No. 69 :- Providing and fixing Chromium Plated pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 70 :- Providing and fixing Chromium Plated BIB cock with wall flange Jaquar make continental ( CAT. No. CON-047) or equivalent including necessary sockets / union nut etc. complete.

A) For Ground Floor

B) For First Floor

Item No. 71 :- Providing and fixing Chromium Plated sink cock with raised J" shaped swinging casted spout jaquar or equivalent make continental (CAT.NO. CON -359) including necessary sockets/ union nut etc. complete."

A) For Ground Floor

Item No. 72 :- Providing and fixing chromium plated towel rod 16 millimetre diametre and 75 centimetre in length including all accessories complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 73 :- Providing and fixing 450 millimetre x 550 millimetre size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 74 :- Providing and constructing Brick Masonry inspection trap Chamber 90 centimetre x 45 centimetre including 1:4:8 C.C foundation, 1:2:4 C.C. channels / half round glazed stoneware pipe channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, fixed in cement concrete with R.C.C. Cover.

A) For Ground Floor

Item No. 75 :- Providing and constructing Brick Masonry Inspection Chamber 90 centimetre x 45 centimetre With R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight with 75 millimetre thick R.C.C. cover etc. complete.

A) For Ground Floor

Item No. 76 :- Providing soak pit of size 120 x 120 x 120 centimetre including excavating and filling with brick bats, charcoal as per drawing etc complete.

A) For Ground Floor

Item No. 77 :- Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete

A) For Ground Floor

Item No. 78 :- Providing and laying 100 millimetre diametre salt glazed stoneware pipe including fittings such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete.

A) For Ground Floor

Item No. 79 :- Providing and fixing P.V.C. Rain water pipes of 160 millimetre outer diameter and having wall thickness of 2.2 to 2.7 millimetre confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment)

A) For Ground Floor

Item No. 80 :- Providing and fixing 10 centimetre C. I. Nahani Trap including C. I. grating bend and piece of C. I. pipe upto the outside face of the wall complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 81 :- Providing and fixing stainless steel sink of size 600 x 510 x 200 millimetre of Nirali or equivalent make incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.

A) For Ground Floor

Item No. 82 :- Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 55 x 40 centimetre size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. (BRAND - HINDWARE/ JOHNSON/PARRYWARE/ VIENA/ AMERICAN STANDAR)

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 83 :- Providing and fixing coloured glazed earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap brackets for fixing the cistern 32 millimetre diametre P.V.C. flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap soil pipe connection up to the outside face of the wall.

A) For Ground Floor

B) For First Floor

Item No. 84 :- Providing and fixing European type wall-hung white water closet of Paryware / Hindware with push valve concealed type with cover plate 32mm size of JAQUAR MAKE SERIES FLV-1095 including soil pipe ,vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cutting& making good walls, floors etc. complete.(HINDWARE/ JOHNSON/ PARRYWARE/ VIENA)

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 85 :- Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 millimetre diametre including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 millimetre thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete.

A) For Ground Floor

B) For First Floor

Item No. 86 :- Providing structural steel work in hollow section of various thickness and sizes in A1662 square, rectanular and round shape from 25 millimetre to 450 millimetre section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and painting complete.

Item No. 87 :- Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.

Item No. 88 :- Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm)

Item No. 89 :- Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenter-to-center. The end rib shall be designed for anti-capacity groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm) 301 mm to 600 mm girth (Surface Width).

Item No. 90 :- Providing and fixing UPVC Roof made up of 3 layers roofing material of thickness 2mm having width of 1130 mm and of required Length having Tensile strength not less than 330 kg/cm2, including fastening with self drilling screw having washers made of stainless steel etc. complete.

Item No. 91 :- Providing and applying pearl / luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 92 :- Providing and applying two coats of exterior white weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 93 :- Providing and applying two coats of lead / zinc base oil paint / bituminous paint of approved colour, shed and quality to new wood work and fibre boards including preparing the surface, knotting, scaffolding if necessary excluding primer coat etc. with all leads and lifts etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 94 :- Providing and applying two coats of Lead / zinc base oil paint of approved colour, shade and quality to new structural steel work and iron work in building including scaffolding if necessary, cleaning and preparing the surface cleaning including primer coat etc. complete.

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 95 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 0.5 percent of clorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

A) For Ground Floor

Item No. 96 :- Providing and applying Texture plaster with finishing with Purlina/ Rustic texture material (with texture material of Asian/ Renava/ Nitco/Temtex or equivalant company make) in 3 to 4 milimeter thickness on previously finished plastered surface including plaster Groove 6 millimetre thick or Tape Grooves 35 to 45 millimetre thickness or as required in all postion including preparing the surface scaffolding etc. complete. ( Excluding texture Paint and Texture Paint Finishing)

A) For Ground Floor

B) For First Floor

C) For Second Floor

Item No. 97 :- Carrying out various test in Government P.W.D. Laboratory as per relevant standards and submitting test results to Engineer-in-charge or his representative and retesting if required, including taxes, overheads and other allied charges etc. complete.

TMT Bar Tensile strength, % Elongation, Yield stress, wt per metre, Bend and rebend test, Proof stress.

Upto 16 mm diameter

Above 16 mm diameter

Cement

Consistency, Initial and Final setting time, Specific gravity, Compressive Strength, Fineness, Soundness.

Cement Concrete

Concrete mix design : (With all test on basic materials) M-25

Compressive Strength of C. C. cubes

Vitrified Tiles

Water Absorption, Modules of Rupture

Kota / Granite

Water absorption , Specific gravity.

Paving Blocks M-40 grade

Compressive Strength, Water Absorption, Flexural Test, Resistance to wear Test

Fine Aggregates (Sand)

Fineness modulus, (Sieve Analysis) Silt and clay content

Silt Factor

Coarse Aggregate

Grading of aggregates

Specific gravity, Water absorption, Crushing value, Impact value, Flakiness index & Elongation index.

Flakiness index

Laterite Stone / Bricks

Compressive Strength, Water absorption

AAC Block

Compressive Strength, Water absorption

Neharkar Construction

Ms umakant m mhaddalkar ans sons