Improvements of Road infront of Gafar house and Julaika s house in ward no 3, at Maseed road in ward no 4, behind Subbu house in ward no 9, near Thahira house in ward no 21, near Chandrashekhar house in ward no 2 and Francis house to Madappa house main road at Bhagavthinagar Housing board in Madikeri CMC limits

Improvements of Road infront of Gafar house and Julaika s house in ward no 3, at Maseed road in ward no 4, behind Subbu house in ward no 9, near Thahira house in ward no 21, near Chandrashekhar house in ward no 2 and Francis house to Madappa house main road at Bhagavthinagar Housing board in Madikeri CMC limits

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

Plain Cement Pavement Quality M30 grade Concrete (RMC) with OPC & GGBS laid without Paver - Construction of un-reinforced plain cement concrete pavement using RMC M-30 grade with OPC @ 270 ...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreadin...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...