IMPROVEMENT TO CERTAIN OMQs AT AF STN MEMAURA

Taking down of wooden chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed .

Taking down of wooden chowkhats or frame with shutters (without taking off shutters from the frames) exc. 1.50 Sqm & n.exc. 4 Sqm each complete all as specified and directed .

Taking down shutters of any description n.exc 1.0 sqm each complete all as specified and directed .

Supply & fix pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 125x60mm made out of 1.25mm thick mild steel sheets complete all as specified & directed.

Supply & fixing pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 105x60mm made out of 1.25mm Thick MS sheets complete all as specified & directed.

Supply & fix mild steel work as in bands, straps, hold fast, wall ties, hooks for hanging fans, angle cleats & similar small articles conforming to Fe-410-0 or Fe-310-0 complete all as specified & directed.

S & F factory made 100% solid wood polymer composite (WPC) single rebated Door frame 50x75mm made from wood polymer composite (single extruded process) material with premium density 900kg/m3,manufactured by an ISO 9001-2015 certified company, all as per specifications, drawings as directed by Engr-in-Charge.

M&L PCC 1:2:4 type B-1 (using 20 mm graded aggregate) for hold fast, coping, pressed steel frame, benching roof kerbs etc. complete all as specified and directed.

S & F 35 mm thick Flush shutters,solid core construction,with both side particle board core all as specified and directed.

S & F factory made glazed and skeleton WPC door shutter 30mm thick solid plain of required size comprising of virgin polymer of K value 58-60(Suspension grade), calcium carbonate and natural fibres(wood powder/rice husk/wheat husk) and non toxic additives made from Extrusion process WPC foam sheet single Extruded (inner) with density not less than 650 kg/cum, manufactured by an ISO E9001-2015 certified company having good screw holding capacity (screw withdrawl strength of 2000N Face & 1000N Edge, minimum compressive strength 50N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof, Fire retardant and fixing with S.S butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws all as per direction of Engineer-in- Charge.

S & F in repair of WPC shutter of laminated finish,30mm thick solid plain of required size comprising of virgin polymer of K value 58-60(Suspension grade), calcium carbonate and natural fibres(wood powder/rice husk/wheat husk) and non toxic additives made from Extrusion process WPC foam sheet single Extruded (inner) with density not less than 650 kg/cum manufactured by Rajshri an ISO E9001-2015 certified company having good screw holding capacity (screw withdrawl strength of 2000N Face & 1000N Edge, minimum compressive strength 50N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof, Fire retardant with necessary full body threaded star headed counter sunk S.S. screws all as per direction of Engineer-in- Charge.

M & L for preparation of new Surfaces of wood of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S & F 300 mm mild steel ,ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

Supply & fix aluminium anodized barrel tower bolts 200mm long, of extruded section complete all as specified & directed.

S&F 300 mm long ISI Mark aluminium anodized sliding door bolt, plate type, stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed.

Supply & fix ISI Mark aluminium handles 150 mm long, cast type, anodized complete all as specified & directed.

Supply & fix mild steel butt hinges 125 mm long complete all as specified and directed .

S& F aluminium anodised powder coated of approved colour sliding type three track (02 glazed shutters and 01 gauzed shutter) window with sliding shutter and frame with and including powder coated aluminium grill not exc1.5kg/sqm,5 mm thick tinted glass and mosquito proofing net as detailed below complete all as specified and directed:-(i) Frame section 91.85x 31.75x1.3 mm section No 8758 for top and sides rails and 91.85x31.75x1.20 mm for bottom rail section No 8687.(ii) Shutter for top,bottom and side rails 40x18x1.5 mm section No 8820.(iii) Glass 5mm thick one side reflective glass and other side visible fixed with rubber gasket and aluminium clips bearing section No. 4407 and necessary handles,tower bolt etc. as directed .(iv)Stainless steel wire cloth fixed with aluminium frame.(v) Filling of gap between wall and aluminium frame with silicon putty to make it proper water tight.(vi) Locking arrangement and providing Namda rope to make the frames air tight.

M&L for white tiles of 15mm thick any size including dismantling with 15 mm thick screed bed 1:6 cement mortar laid in counter top and window cill all as specified and directed by Engr-in-Charge.

S & F in repair of WPC shutter of laminated finish,18/19mm thick solid plain of required size comprising of virgin polymer of K value 58-60(Suspension grade), calcium carbonate and natural fibres(wood powder/rice husk/wheat husk) and non toxic additives made from Extrusion process WPC foam sheet single Extruded (inner) with density not less than 650 kg/cum manufactured by an ISO E9001-2015 certified company having good screw holding capacity (screw withdrawl strength of 2000N Face & 1000N Edge, minimum compressive strength 50N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof, Fire retardant with necessary full body threaded star headed counter sunk S.S. screws all as per direction of Engineer-in- Charge.

S&F for mild steel bright finished telescopic ball bearing drawer channel (Silver) coated of 450 mm long, Make- Hettich/OZONE/FLYRAIL

S&F hydraulic hinges (L-Bihari) 0*/8*/16* degree MS bright polished Make-Hettich /OZONE/FLYRAIL or ISI marked

S&F decorative laminate 0.9mm thick, type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as directed.

S&F stainless steel of grade SS 304 plate baskets/units of kitchen cabinets complete set of 12 Nos ie (Plain wire basket 480x506x100mm -02 Nos, Plain wire basket 480x506x150mm - 01 Nos, Thali Basket 470x485x150mm-01Nos, Thali Basket 470x485x200mm-01Nos, perforated cutlery basket size 470x485x100mm -01 Nos, Cup and saucer basket 470x485x100mm-02 Nos, Three shelf pull-out 150x485x430mm -01 Nos, Two shelf pull-out 200x485x430mm-01 Nos, Grain trolly 470x485x350mm - 02 Nos) fixed with scews to shutters complete all as specified and directed.

S&F aluminium powder coated 'G' profile handle 35mm size of approved colour fixed to kitchen cabinets complete all as directed.

S & F continuous piano hinges mild steel bright finished width of flaps 30mm while open all as specified and directed.

S & F 40mm dia cup board knobs with nut screw & washer of mild steel bright finish all as specified and directed.

S&F hasp and staple 125mm long aluminium anodised complete all as specified and directed

S F Magnet catcher fixed in cupboard/wardrobe complete all as specified and directed

S&F in repair 25mm Dia stainless steel curtain rod with two Nos of knob and with stainless steel brackets complete all as specified and directed.Note:- Each curtain rod shall be 25 cm extra long to the size of clear opening.The each curtain rod will be minimum 750 mm and maximum 2.40 mtr length.

M&L for Brick work with sub class B' bricks straight or curved on plan exc 6m mean radius, built in CM 1:6 including demolition of brickwork built in cement mortar complete all as specified and directed.

M&L for rendering 15mm thick cement plaster 1:6 on fair faces of brick work or concrete surfaces

M&L for rendering 15mm thick in CM 1:6 on any faces of brick or concrete surfaces and finish the surface even and smooth even including taking down cement plaster complete all as specified and directed.

Material & labour for rendering 15 mm thick in CM 1:4 with water proofing compound on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement including taking down cement plaster complete all as specified and directed (Note : WPC qty wii be measured and paid separately).

Supply only water proofing compound complete all as specified and directed.

Material & labour for rendering 10mm thick in CM 1:4 as in ceiling finished even & fair faces including taking down cement plaster complete all as specified and directed .

Material & labour for preparation/complete removal of existing treatment from old/new plastered surfaces of external wall and applying two coats of exterior emulsion paint white or tint over a coat of 1.5 mm thick birla wall care putty on wall/chajja/facia/fins complete all as specified and directed .

M&L for preparation/complete removal of existing treatment from of old/new surfaces of internal wall and applying two coats of oil bound distemper over a coat of 1.5 mm thick Birla wall care putty complete all as specified and directed.

M&L for preparation/complete removal of existing treatment from of old/new surfaces of ceiling internal wall and applying two coats of oil bound distemper over a coat of 1.0 mm thick Birla wall care putty complete all as specified and directed.

Demolition of cement concrete of ground floors and Paving n.exc. 15 cm thick (below or above ground level) complete all as specified and directed .

Material & labour for 75 mm thick PCC 1:3:6 type C-1 (using 40mm graded stone aggregate) as in plinth protection/Path paving surface finished even and smooth without using extra cement complete all as specified and directed .

M&L vitrified Ceramic light shade tiles 10mm thick (square /rectangular) polished,area of each tiles exceeding 0.42 sqm but not exceeding 1.0 sqm ,in floors and skirting including 15 mm thick screed bed 1:6 in CM and dismantling of floor hearth or wall tiles etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed .

M&L for 300 x 600 x 7 mm thick Glazed ceramic coloured tiles(premium quality) incl dark shade border/heighlighter in dado/skirting set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 10mm plaster in cement mortar 1:4 and dismantling of floor hearth or wall tiles complete all as specified and directed .

M&L Non skid ceramic coloured tiles joint free 7-8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or cement to match over and including 15 mm screed bed in cement mortar 1:6 and dismantling of floor hearth or wall tiles complete all as specifed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed .

All as per Sl Item No 45 here-in-before but 20 mm bore pipe complete all as specified and directed .

Supply & fix in repairs 16 mm CPVC pipes SDR 11 & plain CPVC SDR 11 with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed .

All as per srl item No. 47 above but 20 mm bore pipe complete all as specified and directed .

Supply & fix in repair rotational moulded polyethylene water storage tanks 500 Ltrs capacity three layered (cylindrical vertical with threaded type closed top) hoisted and fixed in position all as specified in SSR Pt-I including taking down the existing tank complete all as specified and directed .

Disconnecting of existing PVC over head Water Tank and refixing in the correct position after cleaning and necessary repair as required complete all as specified and directed .

Supply & fix in repair long body bib taps brass chromium plated fancy type 15 mm bore size screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply & fix in repair short body bib taps brass chromium plated fancy type 15 mm bore size screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply & fix in repair brass chromium plated shower rose 125 mm size with shower arm square shape 225mm long with flange complete all as specified and directed.

S & F in repair water closet 'E' type single piece including dual press flushing cistern, syphonic action, incl slim and slow fallen seat cover of approved make complete fitting all as specified and directed by Engr-in-Charge.

S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe 1.25 metre long flexible tube and ABS wall hook including making connections and in position complete in all respect as specified.

Supply & fix in repair vitreous china wash hand basin, white size 550x400 mm including brackets, CP waste coupling &PVC waste pipe of 32 mm dia complete all as specified and directed.

Supply & fix in repair 15 mm dia angle stop cock fancy type CP screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union complete all as specified and directed.

S&F in repair 15mm CP wall mixer in bath with 'L' bend provision for over head shower type complete all as specified and directed.

S&F in repair 15mm bore pillar taps brass chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe, fixed in repairs complete all as specified & directed.

S&F PVC(SWR) floor trap 75 mm bore including jointing to waste pipe in cement mortar as in repairs complete all as specified & directed.

S&F 127mm dia CP grating with hole complete all as specified and directed.

S&F 127mm dia CP grating without hole complete all as specified and directed.

S & F in repair PVC connection with CP brass nuts 600 mm long all as specified and directed .

S&F Towel ring in Kitchen complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long.

Supply & fix in repair stainless steel sink with drainage board, made out of 1mm thick sheet for kitchen with waste pipe,waste coupling CI cantilever brackets, connecting union over all size 1370 x 460mm with bowl size 410 x 330 x 180mm complete all as specified and directed .

S&F in repair brass chromium plated towel rail 600 mm long, 20mm dia of a approved quality, complete all as specified & directed.

S&F in repair 110mm PVC (SWR) pipe single socketed including Bend in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes including PVC Tee ,socket,elbow,clamp etc complete all as specified and directed

S&F 110mm/125mm PVC(SWR) Gully Trap setting and jointed with solvent cement complete all as specified and directed.

S&F peg set of three for clothes hanging complete all as specifed and directed

Supply & fix in repair 15 mm dia stop cock (Concealed) cast copper alloy screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union complete all as specified and directed .

Dismantling of roof,floors,( other than ground floors) staircase ,landing chajja and similar suspended work of any thickness or description etc complete all as specified .

M&L for providing PCC 1:3:6 type-C1, (using 20mm graded stone aggregate) padding over slab as levelling course complete all as specified and directed.

M&L for providing 10mm thick plaster in CM 1:3 mixed with polymer based water proofing compound when levelling coarse is still green.

M & L for applying Smart Care Damp Proof Ultra fibre reinforced elastomeric liquid applied water proofing membrane as in roof treatment @ 1 Litre per 10 Sqft inclusive of all three coats as per following application process: - (a) Prepare the surface by cleaning with high pressure water jet / wire brushes to ensure that it is free of dust, oil, grease, grime and loose particles. (b) Damaged portion if any to be repaired before application of roof treatment as per manufacturer's instructions. (c) Applying self priming coat of Smart Care Damp Proof Ultra duly diluted with water in 3:1 ratio by volume. Allow the primed surface to dry for at least 3-4 hours prior to application of subsequent coat. (d) Applying 2 perpendicular coats of Smart Care Damp Proof Ultra without any dilution to achieve a forced system coverage. Allow it to dry for at least 4-6 hours between two coats. NOTE: - WORK SHALL BE CARRIED OUT BY THE AUTHORISED APPLICATORS OF THE MANUFACTURER IN CLOSE SUPERVISION OF EXECUTIVE STAFF UPTO ENGINEER-IN-CHARGE LEVEL. MAKE- ASIAN PAINTS, STP LTD.

M&L cutting out crack in V section in existing roof ,chajjas or similar work up to 40 mm deep and cleaning the same with water jets to get rid of any loose material and wetting ,grouting with cement & sand mortar 1:3 mixed with liquid WPC all as directed .

Removing of demolished building material and shifting it to distance up to 1.0 Km at abandoned oxidation pond near STP complete all as specified & directed.

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket , power socket and bulk head fittings) on surface wiring on wooden batten/casings & caping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators, sockets and defective main switch/DB/MCB/Metal plug etc. by unscrewing carefully from boards etc and making good disturbed surfaces of walls complete all as specfied and directed.

M&L for point wiring for light / fan/ Exhaust fan controlled by one switch with 1.5 Sqmm single core 1100 V grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade (ISI Marked) having dia not less than 20mm with all fittings including MS galvanised pressed steel terminal sunken boxes of thickness not less than 1.12mm of required module complete with frame plate and cover plate of required module for mounting modular switches, sockets etc. including 1.5 Sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conduiting and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specified and directed.

All as per item No 80 above but for call bell point complete all as specified and directed.

All as per item No 80 above but for 5 pin 5 amps socket outlet independent board complete all as specified and directed.

All as per item No 80 above but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

All as per item No 80 above but for one light point controlled by two Nos 2 way switches complete all as specified and directed.

All as per item No. 80 here-in-before but by using 2.5 Sqmm FRLSH copper conductor cable with continuous earth wire of 2.5 Sqmm FRLSH copper conductor for one 3 pin 15 Amp socket outlet point controlled by one switch.

S&F switch modular type 5/6 Amps, 230 V AC, single pole, one way complete all as specified and directed.

S & F modular switch piano 2- way, 5/6 amps flush type 230 volts complete all as specified and directed.

S&F switch piano modular flush type 16/20 Amps, 230 V AC, single pole, one way complete all as specified and directed.

S&F socket outlet multi-purpose modular for 2 pin and 3 pin, 5 Amp flush type with shutter complete all as specified and directed.

S&F Modular bell push type 5/6 Amps, 230 V AC, single pole, one way complete all as specified & directed.

S&F socket outlet, multipurpose, modular 6 pin, 6 /15Amp with shutter complete all as specified and directed.

S & F point wiring with electrolytic grade solid annealed copper conductor, jelly filled coaxial screened TV cable (category AL FOIL+ AL BRAND) with maximum signal loss 3.5 db/ 100 yards @ 100 Ghz) drawn in and including concealed rigid PVC conduit medium grade of size 20 mm including a pressed MS sheet (1.6mm thick) sunk box of required module complete with frame plate and cover plate of required module for mounting a modular TV socket complete including cutting of chases in wall/ floor and making good the disturbed surface as per adjoining surfaces complete all as specified and directed.

S&F Modular type Telephone socket, RJ 11 Type, with shutter complete all as specified and directed by Engr-in-charge.

S&F Modular type T.V socket, 1 Module, complete all as specified and as directed by Engr-in-Charge.

S & F bell ding dong AC , 230 VOLTS, single pole complete all as specified and directed.

S & F ceiling rose 65 x 50mm three terminals complete all as specified and directed.

S & F ceiling modular fan regulator, electronic stepped type, 120 W, 2 module, 5 stage speed regulation, ISI marked complete all as specified and directed.

S & F Wall/surface mounted type LED light fitting batten type complete with LED 1x 20 watt (4 feet long), extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed.

S & F Wall / surface mounted type LED light fitting batten type complete with LED lamp 10- watt (2 feet long), poly carbonate body and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed.

S & F Wall / surface mounted type LED light fitting batten type complete with LED lamp 05- watt (2 feet long), poly carbonate body and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed.

S & F Wall / surface mounted type Bulk Head LED light fitting complete with LED lamp 10 watt, extruded aluminium heat sink provide for efficient heat dissipation and integrate electronic driver complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed.

S&F LED Street Light Fittings having Ingress Protection class minimum IP-65 , suitable for road lighting luminaire with high power LED and maintenance free system for capacity 20 W complete with 32 mm bore light grade GI pipe bracket (1.5m long) duly bent to shape including 2 Nos M.S. Flat (25mmx5mm) clamps, nuts, bolts, washers etc. all as specified and directed.

S&F Decorative wall mounting light fittings with opal glass diffuser and stainless steel body suitable for and including LED Lamp 9Watt (B-22 base) all as specified and directed.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

M & L for taking down carefully existing ceiling fan/exhaust fan from site before B/R repair work, keeping in safe custody in store for greasing / oiling of ball bearings / bushes and making it for smooth and noise free operation and painting with Hi-Gloss white synthetic enamel paint by spray painting after filling cavaties and re-fixing after providing new fan clamp, nuts/bolts, washers, down rod and provision of 3 core flexible cable from ceiling rose to fan connector complete with writing of MES No. on the fan surface all as specified and directed.

Supply and fixing in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 12 way, double door with 100 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

All as per item No 106 above but 08 Way complete all as specified and directed.

All as per item No 106 above but 04 Way complete all as specified and directed.

Taking down distribution board of any type complete all as specified and directed.

S & F MCB single pole 240 volts, 'C' curve of rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.

S & F MCB DP 240 volts, 'C' curve of rating from 40 to 63 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.

Taking down old unsv sub main wiring any type and size aluminium/ copper including batten/ conduit and making good disturbed surface to match with existing complete all as specified and directed.

M & L for submain wiring with two single core 1100 V grade FRLSH PVC insulated flexible copper conductor cable of size 6 Sqmm and one single core PVC insulated FRLS flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & including a separate concealed PVC conduit medium grade, ISI mark of dia not less than 25mm including cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with adjoining surfaces complete all as specified and directed.

M & L for submain wiring with two single core 1100 V grade FRLSH PVC insulated flexible copper conductor cable of size 4 sqmm and one single core PVC insulated FRLS flexible copper conductor cable green colour of size 4 Sqmm as earth lead in & including a separate concealed PVC conduit medium grade, ISI mark of dia not less than 25mm including cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with adjoining surfaces complete all as specified and directed.

S & F concealed type GI Sheet enclosures for Modular switches / sockets etc. complete with a 25 Amps modular type motor starter(2 Module) with one single pole Modular type MCB of capacity 20 Amps (1 Module) & a 20 Amps 3 pin modular socket(2 module) including electrical connections complete all as specified and directed. (For Air Conditioners)

M&L for earthing complete with galvanised steel plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtrs deep below ground level with top edge of the plate not less than 1.50 Mtrs below ground level connected to galvanised iron Wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified including 15 mm GI tubing medium grade and necessary fitting for protection of GI wire including laying of charcoal dust and common salt in alternate layer, PCC Pit (1:3:6) type C-1 using 20 mm graded stone aggregate, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 6 mm dia round bar @ 75mm C/C both ways with MS handle 8mm dia, plastering 15mm thick CM (1:6) externally upto 150mm below ground level , GI funnel with 20mm dia medium grade GI pipe for watering and wire mesh including excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate No 3 of SSR Part (2009) and connected to earth test point including testing and marking Bldg Nos and writing Test Results on a 3.0mm thick painted MS earth pit marking Plate (200mm x 100mm) duly welded with a 450mm long 10mm dia round MS rod, fixed with the earth pit chamber by grouting complete including taking out old unserviceable earthing system including demolishing with old earth pit chambers and removing of debris from the site with levelling the ground all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods with remote control and accessories, 230 V, 1200 mm sweep, Minimum air delivery 210 CFM with service value 6.00 BE, Five star rated with brushless direct current motor (BLDC with remote) complete all as specified and directed.

Supply and fixing Wall Fan high speed, 300mm sweep, 1350 RPM or above, air delivery 55 CFM, 220-240 volts, AC, 50 Hz complete all as specified and directed.

Supply and fixing of GI Tubing 50mm bore , medium grade with all fittings fixed to wall, floor, ceiling or laid in floors complete all as specified and directed.

M&L for preparation of new surfaces of Steel and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth complete all as specified and directed.

Supply and fixing hook for hanging ceiling fans and similar small articles confirming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F auto clean wave sensing kitchen chimney having maximum airflow/suction power 1250 cubic meter per hour, rated power 160 w, filter-less technology, efficient heat auto clean and dimension (89.4x49.7x56)cm, silent operation with built-in lights to illuminate the cooking area including 150mm dia suction pipe@ 6ft for exhaust smoke and dust with all necessary accessories and fittings complete all as specified and directed (Make: Havells model No Deneb 90, cat part no; GHKCNBJKO or equivalent)